Single Ended Steering Cylinder Kit 1.75 Inch X 6.75 Inch X 0.750 Inch Rod PSC Performance Steering Components SC2222K

PSC Steering Assist Cylinders provide the steering power you need to tackle the toughest trails...go where you want to go with PSC! The SC2222K is a complete single-ended cylinder assist kit designed for applications requiring 6.75 inches of steering travel.

Recommended cylinder size for 39 inch and taller tire sizes on applications requiring 6.75 inches of steering travel. This complete kit includes everything you need for installation.

Specifications:
- Bore: 1.75 inches
- Stroke: 6.75 inches
- Rod Diameter: 0.750 inches (3/4")
- Type: Single Ended, Double Acting
- Port Fittings: 6AN

Features:
- 1.75 inch bore provides excellent steering assist for larger tires
- 6.75 inch stroke for applications requiring this specific travel length
- Chromemoly steel rods for superior strength and durability
- 0.750 inch (3/4") rod diameter handles heavy loads
- 6AN port fittings included for hydraulic connections
- Uses 5/8-18 Male and 3/4-16 Female threaded rod ends with 5/8" eyelet
- Wiper seal prevents contaminant damage and extends service life
- Durable powder-coated finish resists corrosion
- Double-acting design provides hydraulic assist in both directions
- Single-ended configuration for cylinder assist applications

Kit Includes:
- SC2222 Single Ended Steering Cylinder (1.75" x 6.75" x 0.750" rod)
- Rod ends (5/8-18 Male and 3/4-16 Female threaded with 5/8" eyelet)
- SCRK2-A Hardware Kit
- 6AN port fittings
- All necessary mounting hardware

Applications:
- Cylinder assist steering systems
- Vehicles with 39 inch and taller tires
- Off-road trucks and SUVs
- Jeep Wrangler (TJ, LJ, JK, JL, JT with appropriate mounting kit)
- Custom builds requiring 6.75" steering travel
- Works with cylinder assist-ready steering gearboxes

What is Cylinder Assist Steering?
Cylinder assist steering adds a hydraulic ram to your existing power steering system, dramatically increasing steering force without replacing your factory steering box. The cylinder works in parallel with your steering box, providing additional hydraulic assist when you need it most—turning large tires, crawling over rocks, or maneuvering with locked differentials.

Benefits of the SC2222K:
- Reduces steering effort with 39"+ tires
- Maintains factory steering feel and control
- Dampens kickback from rocks and obstacles
- Improves steering response with locked differentials
- Extends steering box life by reducing load
- Complete kit - includes cylinder, rod ends, and hardware
- Professional-grade components built for extreme use

Installation Requirements:
- Requires cylinder assist-ready steering gearbox with hydraulic ports
- Requires appropriate mounting bracket for your vehicle/axle combination
- Requires hydraulic hoses (typically -6AN)
- Requires tie rod clamp sized for your specific tie rod diameter
- High-pressure hydraulic hoses rated for power steering use
- Professional installation recommended

Rod End Specifications:
- 5/8-18 Male threaded rod end with 5/8" eyelet (pitman arm side)
- 3/4-16 Female threaded rod end with 5/8" eyelet (tie rod clamp side)
- Allows for proper connection to steering components
- High-strength construction for extreme loads

Why Choose the SC2222K Kit?
This is a complete cylinder assist kit that includes not just the cylinder, but also the rod ends and mounting hardware you need for installation. By purchasing the kit instead of individual components, you ensure all parts are properly matched and save time on assembly.

The 1.75" bore provides excellent steering force for tires in the 39"+ range, while the 6.75" stroke is ideal for many popular axle configurations. The included rod ends with 5/8" eyelets provide a clean, professional installation.

Comparison to Other PSC Cylinders:
- SC2200K (1.5" bore x 8" stroke): For 38" and smaller tires with 8" travel
- SC2207 (1.75" bore x 6" stroke): For 37"+ tires with 6" travel
- SC2222K (1.75" bore x 6.75" stroke): For 39"+ tires with 6.75" travel (THIS KIT)
- SC2201K (1.75" bore x 8" stroke): For 39"+ tires with 8" travel

How to Measure Steering Travel:
Proper stroke selection is critical for cylinder assist systems. Measure your axle's full lock-to-lock steering travel to determine which cylinder stroke you need. PSC offers installation tips and measurement guides to help you select the correct cylinder for your application.

Servicing Your Cylinder:
Need a seal kit for maintenance? PSC offers complete seal kits for the SC2222 cylinder to keep your cylinder assist system performing like new.

PSC Performance Steering Components is the industry leader in high-performance steering solutions for off-road, racing, and daily-driven modified vehicles. Every PSC cylinder is built from high-quality materials to deliver the durability and dependability needed for your steering system.

Note: This is a complete kit including the cylinder, rod ends, and mounting hardware. Hydraulic hoses, fittings, and vehicle-specific mounting brackets sold separately.