Savvy Offroad Krawler Lite Bolt-On Rock Sliders | 2007–2018 Jeep Wrangler JKU (4-Door)
The Savvy Offroad Krawler Lite Bolt-On Rock Sliders deliver maximum rocker panel and underbody protection for the 2007–2018 Jeep Wrangler JKU in a clean, high-clearance design that installs in 20–30 minutes using factory mounting points no cutting, no welding, no fabrication required. The replaceable outer skin unbolts and swaps without removing the slider from the Jeep. And when your trails get harder, simply add Savvy's fully boxed 3/16" weld-on frame brackets to upgrade the same sliders to full weld-on strength no new slider body, no starting over.
Born from off-road racing and proven at King of the Hammers, these sliders sit high and tight against the JKU body for maximum clearance without the bulk that hangs up on the same obstacles you are trying to clear. The JKU has been the backbone of serious Jeep builds since 2007. The Krawler Lite was designed for the JKU owner who has been wheeling long enough to know exactly what they need from a slider and won't accept anything less.
**** shown with rocker trim kit****** purchase separately****
Choose Your Level of Protection:
Weld-On Version → Best for hardcore off-road abuse, featuring fully boxed 3/16” frame mounting brackets for superior strength. Weld on version click “HERE”
Bolt-On Version → Ideal for light to moderate off-roading, easy installation with ¼” thick steel mounting brackets.
Born from off-road racing, tested for durability, and built for maximum performance!
Key Features
-
Bolt-On Installation 20–30 Minutes: Mounts directly to factory JKU frame points using ¼" thick steel mounting brackets. No cutting, no welding. Installs in 20–30 minutes with basic hand tools. Ideal for light to moderate wheeling and any JKU owner who wants strong rocker protection without a fabrication shop visit.
-
Upgradeable to Weld-On When You're Ready: The bolt-on version accepts Savvy's fully boxed 3/16" weld-on frame brackets when your trails demand more. Add the brackets, weld them to the frame, and your existing sliders become a hardcore weld-on setup. Same slider body, same skin, same step surface now with permanent frame reinforcement. No replacement required, no money wasted on a new set.
-
Replaceable Outer Skin: The outer body skin is a separate modular component from the mounting brackets. Take a hard hit on the trail? Unbolt the damaged skin, bolt on a replacement. The mounting brackets stay on the Jeep. This feature applies to both the bolt-on and weld-on versions it is what separates Savvy's slider design from nearly every competitor on the JKU market.
-
King of the Hammers Proven: Born from the same racing program that competes at King of the Hammers. For the JKU community which has followed KOH since the race launched in 2008 that heritage means something specific. This is armor that was designed and tested in the same conditions your Jeep will face on the hardest trails you will ever run.
-
3/16" CNC Laser-Cut Steel Construction: Maximum strength without unnecessary bulk. Precision-cut using updated Jeep JKU CAD models for exact fitment on all 2007–2018 JKU 4-door models.
-
High-Clearance, Low-Profile Fitment: Sits high and tight against the JKU body to maximize ground clearance and eliminate obstacle hang-ups. The top skin surface is wide enough for a functional step, low-profile enough to stay clear of whatever the trail throws at it.
-
Long-Arm Suspension Compatible: Designed to work seamlessly with most aftermarket Jeep JKU long-arm suspension kits. Verify fitment with your specific suspension setup before ordering.
-
Ships Raw Steel: Powder coat or paint to your preferred color before or after installation.
-
Made in the USA: CNC laser-cut and bent for precision fitment. Designed, tested, and built in America to Savvy's race-proven quality standard.
Specifications
-
Fitment: 2007–2018 Jeep Wrangler JKU (4-door only)
-
Material: 3/16" CNC laser-cut steel body skin
-
Mounting: Bolt-on with ¼" thick steel brackets upgradeable to weld-on with fully boxed 3/16" frame brackets (sold separately, SD0037)
-
Install Time: 20–30 minutes (bolt-on version)
-
Skin Design: Modular replaceable outer skin independent of mounting brackets
-
Step Functionality: Top surface step accessible while maintaining high-clearance profile
-
Suspension Compatibility: Works with most aftermarket JKU long-arm suspension kits
-
Upgrade Path: Compatible with Savvy weld-on frame brackets (SD0037) for future upgrade
-
Finish: Ships raw steel ready for powder coat or paint
-
Manufacturing: CNC laser-cut and bent in the USA
Bolt-On vs. Weld-On, Which Is Right for Your JKU Build?
Both versions of the Krawler Lite JKU slider use the same outer body skin, the same step surface, the same high-clearance geometry, and the same replaceable modular skin design. The difference is in the mounting brackets and the level of use they are built for and you can start bolt-on and upgrade to weld-on without buying new sliders.
Choose the bolt-on version if you wheel light to moderate terrain, want a 20–30 minute DIY install with no welding, need the flexibility to remove and reinstall, or want to start protected now with a clear upgrade path when your build and trails evolve.
Choose the weld-on version if you wheel moderate to hardcore terrain, want permanent maximum frame reinforcement from day one, and are ready for professional welding installation. See the Savvy Krawler Lite Weld-On Rock Sliders for the JKU for that configuration.
Best For
- 2007–2018 Jeep JKU owners who want strong rocker protection with a fast, clean bolt-on install
- Light to moderate trail rigs and daily-driven JKUs that still see real off-road use
- Builders starting their JKU armor build who want protection now with a clear weld-on upgrade path when ready
- JKU owners who want modular, repairable armor not a one-piece slider they can never cost-effectively repair after trail damage
- Builds running aftermarket long-arm suspension who need a slider designed to work with it
- JKU owners stepping up from worn-out or damaged factory rocker panels who want real armor instead of a cosmetic replacement
Why Choose Savvy Krawler Lite Bolt-On Rock Sliders?
Many Jeep JKU bolt-on rock sliders offer simple protection, but few give you the ability to upgrade to weld-on later and replace the outer skin after trail damage. The Savvy Krawler Lite bolt-on sliders combine high-clearance protection, modular repairability, step usability, and future upgrade flexibility in one system.
For Jeep owners looking for Jeep JKU rock sliders that work for light to moderate wheeling today while keeping the door open for more aggressive builds later, these sliders provide a strong combination of tight-to-body fitment, strong bolt-on mounting, replaceable skins, and long-arm suspension compatibility. That makes them an ideal choice for daily-driven Wranglers, weekend trail rigs, and builds that evolve over time.
Frequently Asked Questions
Does this fit the 2-door JK?
No. The Krawler Lite bolt-on sliders are designed for the 2007–2018 Jeep Wrangler JKU 4-door only. See separate listings for 2-door JK slider options.
Can I upgrade these to weld-on later without buying new sliders?
Yes. The Krawler Lite bolt-on sliders are designed to accept Savvy's fully boxed 3/16" weld-on frame brackets (SD0037). Add the brackets, weld them to the JKU frame, and your existing bolt-on sliders become a full weld-on setup. The slider body, skin, and step surface stay exactly as they are only the mounting system changes.
What if I damage the outer skin on the trail?
The outer body skin is a modular component that unbolts independently of the mounting brackets. Order a replacement skin, unbolt the damaged one, bolt the new one on. The brackets stay on the Jeep throughout the entire process. No removing the full slider, no cutting, no fabrication visit required.
Does this fit all JKU model years from 2007 to 2018?
Yes. The Krawler Lite bolt-on sliders fit all 2007–2018 Jeep Wrangler JKU 4-door models. Built using updated Jeep JKU CAD data for exact fitment across all model years.
How long does installation take?
The bolt-on version installs in approximately 20–30 minutes using basic hand tools and a drill. It mounts to factory JKU frame points no cutting, or welding required.
Does this work with long-arm suspension?
Designed to work with most aftermarket JKU long-arm suspension kits.
Is the rocker trim kit included?
No. Sliders are shown with the rocker trim kit in product images. The rocker trim kit is sold separately.
What finish does it ship in?
Raw steel. Powder coat or paint to your preferred color before or after installation.
