The Reid Racing JK001R is the right (passenger's side) heavy-duty stock replacement steering knuckle for 2007-2018 Jeep Wrangler JK and JKU with Dana 30 or Rubicon Dana 44 front axles. Cast from high-strength ductile iron to eliminate the flex and taper wallowing that plagues OEM aluminum knuckles under serious off-road use.
- Sold individually — right (passenger's side) knuckle only. Order JK001L separately for the left (driver's side).
- Fits 2007-2018 Jeep Wrangler JK and JKU with Dana 30, Rubicon Dana 44, and Mopar & aftermarket JK axles.
- Uses stock 2007+ Jeep Wrangler JK brake rotors, calipers, stub shafts, and U-joints — no new brake hardware required.
- Easy bolt-on installation with no machining required.
- Aftermarket high-strength axle shafts, U-joints/CV joints, and stub shafts are fully compatible.
- Steering linkage raised as high as possible while retaining clearance for OEM Jeep and most aftermarket wheels.
- Tie rod gains 1.5 inches of clearance to minimize vulnerability to trail damage.
- Drag link is flipped and gains 3 inches of height — corrects steering geometry for 3-4 inch suspension lifts. Requires an aftermarket drag link.
- Cast-in DUAL steering stops eliminate bent stop bolts that can cause U-joint and axle failures.
- Tapered tie rod holes fit OEM-size tie rod ends. Tie rod holes can be drilled to accept 3/4" heim ends.
- Antilock Brakes, Traction Control, and Electronic Stability Control systems remain fully operational.
- Cast from high-strength ductile iron and beefed up with extra material and ribbing.
- Powder coated bright Orange® for long-lasting looks.
- 100% Made in the USA.
Part Number: JK001R | Orientation: Right (Passenger's Side) | Skinny Pedal Racing is an Authorized Reid Racing Dealer