Dynatrac adjustable rear track bar kit for the 2020+ Jeep Gladiator JT, SKU DT922068. It replaces the factory rear track bar with a tubular bar you can lengthen or shorten, so you can put the rear axle back in the center of the truck after lifting.
Construction
- CNC bent 1-1/4" x .250 wall 1026 DOM tubing
- CNC machined threaded end and bushing housing
- FK rod end at one end and a dual-durometer, high-angle greaseless bushing at the other, for travel and articulation while damping noise and vibration
- Multi-stage black powder coat
Adjustment
Dynatrac's Double Adjuster Sleeve lets you change the bar length with the bar still on the truck. That makes it easy to correct axle position whenever ride height changes. Adjustments are made with a pin wrench. The instructions say not to go past 2.00" of adjustment, measured from the center of the rod end to the edge of the pinch housing.
Installation notes
- The rod end goes toward the axle, with the pinch bolts on top facing the rear of the vehicle.
- The kit comes with the adjuster sleeve, rod end spacers, rod end and greaseless bushing along with the bar.
- It mounts at the factory locations.
Fitment
- Dynatrac lists the Gladiator at 2020-2023, with 0-2" of rear lift. If your truck is a 2024 or newer, confirm fitment before ordering.
- The same bar is also listed for the 2019-2023 Ram 1500. It is not for trucks with factory rear air suspension, the Ram 1500 Classic or the TRX.
- This is the rear bar. The front bar for JL and JT is DT922027, and the Wrangler JL rear bar is DT922028.