2020-2026 Jeep Gladiator JT J-Venture 3 Inch Lift Kit Front 1.5-2 Inch Lift Kit Rear Lift Kit- FOX 2.5 Performance Series Shocks JKS Manufacturing
JSPEC131PS
2020-2026 Jeep Gladiator JT J-Venture 3 Inch Lift Kit Front 1.5-2 Inch Lift Kit Rear Lift Kit- FOX 2.5 Performance Series Shocks – JKS Manufacturing part number JSPEC131PS.
This JKS J-Venture suspension lift kit is built for the 2020-2026 Jeep Gladiator JT 4 Door. It combines 3 inches of lift and FOX 2.5 Performance shocks. Backed by JKS's 5 Year, 100,000-mile PLUS Protection warranty.
Increase ground clearance and tire clearance on your Gladiator JT with a 3 inch J-Venture suspension system. You get the perfect balance of on and off road capability plus low maintenance.
J-Venture lift kits include dual rate front and rear coil springs, specifically-valved gas shocks, a front adjustable track bar, rear track bar bracket, front sway bar Quicker Disconnects, bump stop extensions, and front caster lock plates to dial in geometry.
The engineers at JKS custom tune shocks and matching springs to significantly improve ride quality and handling on road, as well as performance off-road. An adjustable track bar helps center the front axle while the Quicker Disconnects improve articulation off-road.
Get out and explore with J-Venture.
Features & Benefits
- FOX 2.5 Performance Series
- Front and rear dual rate coils springs
- JSPEC Custom Valve Gas Shocks or FOX 2.0 Performance IFP Shocks
- Front adjustable trackbar
- Front sway bar quicker disconnects
- Front caster cam locks
- Front/Rear bump stop extensions
- Rear extended sway bar links
- Creates leveled stance
Tire Specs
Rubicon Models (all kits)
- Tire: 37x12.50
- Wheel: 17x8
- Backspacing: 4.5- 5 inch
- May rub during max articulation
- Tire: 37x12.50
- Wheel: Stock
- Backspacing: Stock
Non-Rubicon Models (all kits)
- Tire: 35x12.50
- Wheel: 17x8,
- Backspacing: 4.5-5 inch
- May rub during max articulation
- Tire: 33x12.50
- Wheel: 17x8
- Backspacing: 4.5-5 inch
Other tire/wheel sizes can be used, however may require additional modifications.
Important Notes
- Diesel models may achieve up to 1 inch less lift height
What's included in the kit
- 1 x FOX88624157 – Kit: 2020-2024 Jeep Gladiator JT, Front and Rear, 2-3.5 inch Lift, 2.5, IFP
- 1 x JSPEC1257 – 2020-2023 Jeep Gladiator (JT) Rear 1.5 inch Coil Spring Box Kit
- 1 x JSPEC1303 – 2020-2023 Jeep Gladiator (JT) J-Venture 3-3.5 inch Box Kit
- 1 x JSPEC1352 – 2018-2024 Jeep Wrangler (JL) / 2020-2024 Jeep Gladiator (JT) 3.5 inch Front Coil Spring Kit - HD
Specifications
- JKS part number: JSPEC131PS
- Lift height: 3 Inch
- Doors: 4 Door
- Shocks: FOX 2.5 Performance
- Sold as: Kit
- Estimated installation time: 6 Hours
- Warranty: 5 Year, 100,000-mile PLUS Protection
- Country of origin: USA
Resources
California Proposition 65 warning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov