The Pro-X drag link is built from 1.75 inch OD 7075-T651 cold finished aluminum, brushed, with forged chromoly steel ends that are greaseable and rebuildable. It is left and right hand threaded, so loosening the jam nuts lets you adjust it in the vehicle.
Pick the axle width and mount that match your build. Bottom mount is valid for 1.5 to 3.5 inches of lift, and top mount is for 3.5 inches or more.
Pick your configuration
- Standard axle width, bottom mount (RK08126B): Sport, Sahara and Overland models, 1.5 to 3.5 inches of lift
- Standard axle width, top mount (RK08126T): 3.5 inches of lift or more. Requires the Rock Krawler high steer front axle track bar mount (RK08236K), and the passenger side knuckle must be drilled to mount the drag link end.
- Rubicon and wide track OEM axles, bottom mount (RK08128B): 1.5 to 3.5 inches of lift
What's included
- (2) forged chromoly steel ends, greaseable and rebuildable
- (1) 1.75 inch solid drag link, brushed finish
Features and specs
- 1.75 inch OD 7075-T651 cold finished aluminum
- Left and right hand threaded for in-vehicle adjustment
- Engineered to work with the JL and JT Ackerman angle
Fitment
2018-present Jeep Wrangler JL/JLU and Gladiator JT.
Before you order
- Requires 17 inch or larger diameter wheels.
- Requires 4.75 inches of backspacing or less. If you run more backspacing or find wheel interference, a steering stops adjustment is required.
Shipping weight is 25 lb, packed in a 24 x 10 x 8 inch carton.