This ReadyLIFT Falcon MAX3.3 kit gives the 2022-2026 Toyota Tundra a 6 inch lift with Falcon 3.3 Fast Adjust shocks front and rear and a high-angle CV axle kit in the box. It fits 35 inch tires on 20x9 wheels without trimming, or 37 inch tires with trimming. Shocks are included.
Key features
- Falcon 3.3 Fast Adjust dampers with a 3-position knob (Soft, Custom, Firm) and 8-position micro tuning
- 6061-T6 aluminum shock bodies, Red Line high-VI shock oil and volume-optimized damping (VOD)
- High-angle CV axles with a true CV joint, stronger shafts and more articulation
- Retains the factory turning radius
What's included
- Falcon front coilover assemblies (left and right) and rear shock assemblies (left and right)
- 6 inch rear coil springs
- Left and right steering knuckles
- CV axle kit
- Front and rear crossmembers and skid plate
- Left and right sway bar drop brackets, rear geometry correction bracket and rear trackbar bracket
- Front brake line brackets, cam block off plates, headlight sensor bracket sleeve and left bracket
- Front and rear bump stops, rear bump stop extension and rear shock centering ring
- Rear ABS relocator and bracket, front differential vent hose and rear crossmember nut plate
- Hardware pack
Fitment and compatibility
- Fits 2022-2026 Toyota Tundra
- Not compatible with Tundra TRD Pro with Bilstein coilovers, iForce Max Hybrid models or the TRD rear sway bar
- Stock wheels cannot be reused. Most aftermarket 20 inch and larger wheels are compatible, but verify fitment before installing
- 35 inch tires: 20x9 wheel with 5.75 inch backspace (18-20mm offset), no trimming
- 37 inch tires: 20x9 wheel with 5.5 inch backspace (10-13mm offset), trimming required
- Tire recommendations are based on Wheel Pros wheels and Nitto tires. Test fit any tire and wheel combination before installing
Specifications
- Brand: ReadyLIFT
- Part number: 42-52640
- Lift: 6 inch
- Max tire: 35 inch without trimming, 37 inch with trimming
- Shock body: 6061-T6 aluminum
- Shocks included: Yes
- Hardware included: Yes
- Estimated install time: 12 hours, plus or minus 1 hour
Installation
Allow about 12 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT labels it do-it-yourself but recommends a certified mechanic. An alignment, a headlamp aim check and ADAS recalibration may be needed, possibly at extra cost.
Modifying your suspension can change handling and rollover risk (SAE J2492). Always wear your seat belt. Prop 65 notice: this product can expose you to DEHP, a chemical California lists under Proposition 65.