ReadyLIFT 3 Inch SST Lift Kit - 2022-2026 Toyota Tundra Rear Air 2WD 4WD (69-52330)

This ReadyLIFT 3 inch SST kit is built only for the 2022-2026 Toyota Tundra equipped with Load-Leveling Rear Height Control Air Suspension (2WD and 4WD). It lifts all four corners of an air-equipped truck so the front sits level with the rear, and it keeps the factory load-leveling system fully working. It fits up to 35x12.50 tires on 18x9 wheels with +12mm offset. Shocks are not included, but shock extensions are.

Key features

• Front strut spacer that avoids compressing the springs
• Rear airbag spacers keep the factory rear air system fully functional
• Offset rear spacers return the airbag to its factory location
• Slotted rear ride-height sensor bracket for fine adjustment
• Retains the factory turning radius
• Fewer parts for a simpler install

What's included

• Front: strut spacer, left and right upper control arms, left and right differential drops, crush sleeve, differential drop polyurethane bushing, end link spacers
• Brake lines: left and right brake line relocation brackets, rear brake line relocation bracket, rear brake line spacers (tall and short)
• Rear: left and right airbag spacers, left and right bump stop extensions, rear shock extensions, airbag ride-height sensor brackets
• Hardware pack

Fitment and compatibility

• Fits 2022-2026 Toyota Tundra 2WD and 4WD with Load-Leveling Rear Height Control Air Suspension and AVS
• Trucks without rear air suspension need a different kit; the non-air 4WD kit is 69-52311
• Works only with factory 20 inch wheels and does not work with factory 18 inch wheels. ReadyLIFT says most aftermarket wheels are compatible, but confirm fitment before installing
• Not for 2022 and newer Tundra TRD Pro with Bilstein coilover shocks or the TRD rear sway bar option
• TRD Pro skid plate requires the Skid Plate Drop Kit, 67-52050
• ReadyLIFT recommends the 67-52420CV high-performance CV axle kit for all lifted 2022 and newer Tundras, and says damage in 4WD from not using those axles is not covered by the manufacturer
• Tire recommendations are based on Wheel Pros wheels and Nitto tires; test fit any combination before installing. Larger E-rated tires can feel stiffer

Specifications

• Brand: ReadyLIFT
• Part number: 69-52330
• Lift: 3 inch
• Max tire: 35x12.50 on an 18x9 wheel, +12mm offset
• Shocks included: No
• Estimated install time: 7 hours, plus or minus 1 hour

Installation

Allow about 7 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. Alignment, headlamp aim and ADAS checks may be needed, possibly at extra cost.

Modifying your suspension can change handling and rollover risk (SAE J2492). Always wear your seat belt. Prop 65 notice: DEHP.