ReadyLIFT 3 Inch Front SST Lift Kit - 2022-2026 Toyota Tundra Air Suspension (69-52331)

This ReadyLIFT SST kit lifts the 2022-2026 Toyota Tundra with Load-Leveling Rear Height Control Air Suspension 3 inches in front, and includes upper control arms and a CV axle kit. It's a bolt-on kit with no cutting or welding that keeps the full operation and range of the factory load-leveling system, keeps the factory turning radius, and works with stock 20 inch wheels.

Key features

• Heavy-duty tubular steel control arms
• High-angle CV axles with a larger shaft diameter and a true CV joint in place of the factory tripod joint
• Fabricated steel front strut spacers
• 6061-T6 billet aluminum rear coil spring spacers
• Rear shock extensions so the factory rear shocks stay
• Retains the factory turning radius

What's included

• Front strut spacer
• Upper control arms, left and right
• Front differential drops, left and right, with crush sleeve and polyurethane bushing
• End link spacers
• Brake line relocation brackets, left and right, plus rear brake line relocation bracket and rear brake line spacers (tall and short)
• Airbag spacers, left and right, and bump stop extensions, left and right
• Rear shock extensions
• Airbag ride-height sensor brackets
• CV axle kit
• Hardware pack

Fitment and compatibility

• Fits 2022-2026 Toyota Tundra with Load-Leveling Rear Height Control Air Suspension; the page is for the 4WD version
• Works only with factory 20 inch wheels and will not work with factory 18 inch wheels. Most aftermarket wheels are reported compatible, but confirm fitment before installing
• Not for 2022 and newer Tundra TRD Pro models with Bilstein coilover shocks or the TRD rear sway bar option
• Skid Plate Drop Kit 67-52050 is needed for the TRD Pro skid plate
• Tire and wheel recommendations are based on Wheel Pros wheels and Nitto tires; test fit each combination. Larger 10-ply E-rated tires can ride stiffer

Specifications

• Brand: ReadyLIFT
• Part number: 69-52331
• Front lift: 3 inch
• Max tire: 35x12.50 on an 18x9 wheel with +12mm offset
• Material: tubular steel control arms, fabricated steel front strut spacers, 6061-T6 billet aluminum rear coil spring spacers
• Hardware included: Yes
• Estimated install time: 8 hours, plus or minus 1 hour

Installation

Allow about 8 hours, plus or minus 1, not counting alignment or wheel and tire assembly. A certified mechanic is recommended. You may need an alignment, headlamp aim has to be checked, and driver-assist systems may need recalibration, at extra cost.

Modifying your suspension can change handling and rollover risk (SAE J2492). Always wear your seat belt. ReadyLIFT lists a California Prop 65 notice for DEHP.