ReadyLIFT 2.5 Inch Front 1.5 Inch Rear SST Lift Kit - 2001-2007 Toyota Sequoia (69-5010)

This ReadyLIFT SST kit is a mild lift for the 2001-2007 Toyota Sequoia, 2WD and 4WD. A front strut extension and differential drop bracket provide 2.5 inches of front lift while retaining the OEM suspension geometry, and a rear spring spacer adds a slight rake. It handles tires up to 33 inches in diameter (33x11.50) while keeping the stock ride and handling. It requires no cutting or strut spring pre-loading. Shocks are not included.

Key features

• Powder-coated steel strut extensions
• Front differential drop spacers to go with the front lift
• Rear spring spacer installs between the frame and rear spring
• No cutting and no strut spring pre-loading
• Heavy-duty hardware and step-by-step instructions in every kit

What's included

• Powder-coated steel strut extensions
• Front differential drop spacers
• Skid plate spacers
• Rear spring lift spacers
• Heavy-duty hardware
• Step-by-step installation instructions

Fitment and compatibility

• Fits 2001-2007 Toyota Sequoia, 2WD and 4WD
• Not for use with rear air bag suspension
• The rear spacer only works with one of the three Sequoia rear suspension designs, and you cannot tell which you have by trim level or model year. Inspect the rear frame for a top spacer bolt hole before installing. Some Sequoia frames lack it; if yours does, contact customer service for adaptation instructions
• ReadyLIFT lists 295/65R18, 285/60R20 and 285/50R22 as tire examples for 18, 20 and 22 inch wheels
• Tire recommendations are based on Wheel Pros wheels and Nitto tires; test fit any combination before installing. Larger aftermarket tires, often 10-ply E-rated, can ride harsher than OEM 6-ply C-rated tires

Specifications

• Brand: ReadyLIFT
• Part number: 69-5010
• Front lift: 2.5 inch
• Max tire: 33 inch diameter (33x11.50)
• Material: Powder-coated steel (strut extensions)
• Shocks included: No
• Estimated install time: 6 hours, plus or minus 1 hour

Installation

Allow about 6 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. An alignment may be required afterward (extra cost), headlamp aim must be checked and adjusted, and ADAS may need checking, with some systems needing dealer tools.

Modifying your suspension can change handling and rollover risk (SAE J2492). Always wear your seat belt. Prop 65 notice: DEHP.