This ReadyLIFT big lift kit gives the 2022-2026 Toyota Tundra a 6 inch lift with 6 inch rear coil springs and Falcon 1.1 monotube rear shocks. It fits 35 inch tires on 20x9 wheels without trimming, or 37 inch tires with trimming, keeps the factory turning radius and works with the auto adjust headlights. This is the rear coil spring kit. Front shocks are not included.
Key features
- Laser cut, CNC bent, welded and boxed sub-frame drop assemblies
- CNC-machined cast iron front knuckles that keep the factory tie rods with minimal trimming
- Falcon 1.1 monotube rear shocks tuned for the 2022 and newer Tundra
- Bump stop extensions at all four corners
- Sway bar frame mount brackets that keep the front sway bar in factory geometry
- Differential drop system that maintains CV axle and driveline angles
What's included
- Front and rear crossmembers and skid plate
- Front strut spacer
- Left and right knuckles
- Front sway bar drops, left and right, and rear sway bar drops, left and right
- Front brake line brackets
- Cam block off plates, headlight sensor bracket sleeve and left bracket
- Front and rear bump stops and rear bump stop extension
- Rear trackbar bracket, rear crossmember nut plate, rear ABS relocator and bracket
- 1/4 inch front differential vent hose
- 6 inch rear coil springs
- Falcon 1.1 rear shocks
- Hardware pack and instruction manual
Fitment and compatibility
- Fits 2022-2026 Toyota Tundra 2WD and 4WD with rear coil springs. For rear air suspension trucks, ReadyLIFT lists 44-52660
- Not compatible with Tundra TRD Pro with Bilstein coilovers, the TRD rear sway bar or AVS (Advanced Vehicle Suspension)
- Stock wheels cannot be reused. Most aftermarket 20 inch and larger wheels are compatible, but verify fitment before installing
- 35 inch tires: 20x9 wheel with 5.75 inch backspace (18-20mm offset). 37 inch tires: 20x9 wheel with 5.5 inch backspace (10-13mm offset), trimming required
- ReadyLIFT recommends a CV axle kit on all lifted 2022 and newer Tundras (67-52420CV High-Performance CV Axle kit). Not using one in 4WD may lead to damage the manufacturer does not cover
- Recommendations are based on Wheel Pros wheels and Nitto tires. Test fit every combination
Specifications
- Brand: ReadyLIFT
- Part number: 44-52620
- Lift: 6 inch
- Max tire: 35 inch without trimming, 37 inch with trimming
- Rear shocks: Falcon 1.1 monotube, included
- Front shocks included: No
- Hardware included: Yes
- Estimated install time: 12 hours, plus or minus 1 hour
Installation
Allow about 12 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. An alignment, a headlamp aim check and ADAS recalibration, possibly with OEM dealer tools, may be needed at extra cost.
Modifying your suspension can change handling, and failing to drive safely can result in serious injury or death (SAE J2492). Always wear your seat belt. Prop 65 notice: this product can expose you to DEHP, a chemical California lists under Proposition 65.