ReadyLIFT 3 Inch Front 2 Inch Rear SST Lift Kit - 2008-2022 Toyota Sequoia (69-5015)

This ReadyLIFT SST kit lifts the 2008-2022 Toyota Sequoia (2WD and 4WD) 3 inches in front and 2 inches in the rear, with room for a 35x12.50 tire on a 9 inch wheel with 6 inches of backspacing. The front uses powder-coated steel strut extensions with a differential drop kit, and the page says it needs no cutting or strut spring pre-loading.

Key features

• 3 inches of front lift using OEM-safe suspension geometry
• Front differential drop kit included
• Keeps the factory steering radius
• Powder-coated steel strut extensions
• No cutting or strut spring pre-loading

What's included

• Powder-coated steel strut extensions
• Front differential drop spacers
• Rear shock extensions
• Skid plate spacers
• Rear spring lift spacers (installed between the frame and rear spring)
• Heavy-duty hardware
• Installation instructions

Fitment and compatibility

• Fits 2008-2022 Toyota Sequoia, 2WD and 4WD
• Not for vehicles with rear airbag suspension or rear adjustable suspension
• Not for TRD Pro models
• Tire and wheel recommendations are based on Wheel Pros wheels and Nitto tires; test fit each combination. Larger aftermarket E-rated tires may ride firmer than OEM

Specifications

• Brand: ReadyLIFT
• Part number: 69-5015
• Front lift: 3 inch
• Rear lift: 2 inch
• Max tire: 35x12.50 on a 9 inch wheel with 6 inches of backspacing
• Material: powder-coated steel strut extensions
• Hardware included: Yes
• Estimated install time: 6 hours, plus or minus 1 hour
• Warranty: page says it includes a limited lifetime warranty

Installation

Allow about 6 hours, plus or minus 1, not counting alignment or wheel and tire assembly. A certified mechanic is recommended. Alignment, headlamp aim and driver-assist recalibration may be needed at extra cost.

Modifying your suspension can change handling and rollover risk (SAE J2492). Always wear your seat belt. ReadyLIFT lists a California Prop 65 notice for DEHP.