ReadyLIFT 3 Inch Front 1.5 Inch Rear SST3.3 Lift Kit - 2022-2026 Toyota Tundra (62-52460)

This ReadyLIFT SST3.3 kit gives the 2022-2026 Toyota Tundra a 3 inch lift in front and 1.5 inch in the rear, with Falcon 3.3 Fast Adjust coilovers and rear shocks, tubular upper control arms and a high-angle CV axle kit. ReadyLIFT supports up to 35x12.5 tires on 18x9 wheels with +12mm offset, and lists the kit for models including i-FORCE MAX hybrid trucks. Front and rear shocks are included.

Key features

• Falcon 3.3 Fast Adjust monotube coilovers and rear shocks with a three-position compression adjustment (Soft, Custom, Firm) and an eight-position Micro Adjust dial
• Reservoir design, Red Line high-temp oil and Volume Optimized Damping
• High-angle CV axle kit for lifted 4WD use, with more axle travel and less vibration
• Heavy-duty tubular upper control arms with corrected ball joint angles
• Long travel dual rate coil springs
• Falcon progressive rate bump stops that replace the rigid OE external bump stops
• Hard-anodized 6061-T6 aluminum shock bodies

What's included

• Falcon 3.3 front coilovers with remote reservoir, left and right
• Falcon 3.3 rear piggyback shocks, left and right
• Rear coil springs (2)
• Tubular upper control arm assemblies, left and right
• CV axle kit
• Front differential drops, left and right
• Front skid plate
• Falcon bump stops and rear bump stop extensions
• Front and rear brake line relocation brackets
• Knuckle steering stops, polyurethane bushings, crush sleeves and end link spacers
• Hardware pack

Fitment and compatibility

• Fits 2022-2026 Toyota Tundra
• Not compatible with the Tundra TRD Pro
• Not compatible with trucks that have load-leveling rear height control air suspension
• The factory TRD skid plate cannot be reinstalled unless you buy the 67-52050 TRD Pro Skid Plate Drop Kit separately
• Max tire: 35x12.50 on an 18x9 wheel with +12mm offset (35 inch maximum diameter)
• Tire recommendations are based on Wheel Pros wheels and Nitto tires; test fit any tire and wheel combination before installing

Specifications

• Brand: ReadyLIFT
• Part number: 62-52460
• Front lift: 3 inch
• Rear lift: 1.5 inch
• Max tire: 35x12.50 on an 18x9 wheel, +12mm offset
• Material: hard-anodized 6061-T6 aluminum shock bodies
• Shocks included: Yes (Falcon 3.3)
• Estimated install time: 9 hours, plus or minus 1 hour

Installation

Allow about 9 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT labels it do-it-yourself but recommends a certified mechanic. Plan on an alignment, check your headlamp aim afterward, and note that trucks with driver-assist systems may need recalibration with dealer tools.

Modifying your suspension can change handling and increase rollover or loss-of-control risk in sharp turns or abrupt maneuvers, and some modifications may not be permitted in some states. Always wear your seat belt. California Proposition 65: this product can expose you to chemicals including DEHP, which California lists as causing cancer and birth defects or other reproductive harm.