ReadyLIFT 2.5 Inch Front SST2.1 Lift Kit - 2005-2023 Toyota Tacoma (62-55340)

ReadyLIFT 2.5 Inch Front SST2.1 Lift Kit - 2005-2023 Toyota Tacoma (62-55340)

62-55340

Regular price$3,054.99
/
Shipping calculated at checkout.

This ReadyLIFT SST2.1 kit gives the 2005-2023 Toyota Tacoma a 2.5 inch front lift with Falcon 2.1 front coilovers, DOM tubular upper control arms and an included front skid plate. ReadyLIFT says it clears up to 33 inch tall tires, including 285/65R18 on an 18x9 wheel with +0 offset. It is a no-cut, bolt-on kit with Falcon rear shocks included. It is not for the 4Runner or FJ Cruiser.

Key features

  • Falcon 2.1 monotube dampers with 6061-T6 aluminum shock bodies that resist impact and corrosion
  • Heavy-duty DOM tubular upper control arms with corrected ball joint angles
  • Included front skid plate
  • Smart Suspension Technology for a no-cut install

What's included

  • Falcon 2.1 front coilovers, left and right
  • Falcon rear shocks (2)
  • Upper control arm kit
  • Front skid plate
  • Tacoma leaf pack (2)
  • Front body mount plates (2)
  • Front bump stop extensions (2)
  • Brake line brackets, left and right
  • Rear bump stop and alignment tab subassembly
  • Sway bar spacers (2)
  • 1 inch differential drop spacers (2)
  • Hardware pack

Fitment and compatibility

  • Fits 2005-2023 Toyota Tacoma; the page heading lists TRD, SR5 and Rock Warrior
  • Not for use on the 4Runner or FJ Cruiser
  • Tire fit: up to 33 inch tall; 285/65-18 on an 18x9 wheel with 0 offset, or 285/70-17 on a 17x8 wheel with 0 offset
  • Tire recommendations are based on Wheel Pros wheels and Nitto tires; test fit any tire and wheel combination before installing
  • Larger E-rated tires typically ride stiffer than OEM tires

Specifications

  • Brand: ReadyLIFT
  • Part number: 62-55340
  • Front lift: 2.5 inch
  • Max tire: up to 33 inch tall; 285/65R18 on an 18x9 wheel, +0 offset
  • Material: 6061-T6 aluminum shock bodies
  • Shocks included: Yes (Falcon front coilovers and rear shocks)
  • Estimated install time: 7.5 hours, plus or minus 1 hour

Installation

Allow about 7.5 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. Plan on an alignment, check your headlamp aim afterward, and note that trucks with driver-assist systems may need recalibration with dealer tools.

Modifying your suspension can change handling and increase rollover or loss-of-control risk in sharp turns or abrupt maneuvers, and some modifications may not be permitted in some states. Always wear your seat belt. California Proposition 65: this product can expose you to chemicals including DEHP, which California lists as causing cancer and birth defects or other reproductive harm.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed