ReadyLIFT 6 Inch Front 5 Inch Rear Lift Kit with Bilstein 5100 Shocks - 2019-2024 Ram 3500 (49-19630)

This ReadyLIFT kit lifts the 2019-2024 Ram 3500 single rear wheel Standard Output diesel 4WD 6 inch in front and 5 inch in the rear, with four Bilstein 5100 series shocks. It includes the Driveline Indexing System, a CNC-machined billet aluminum transfer case clocking ring, plus a heavy-duty transmission crossmember. It keeps the factory suspension geometry and articulation and allows up to 37x13.50 tires on 9 inch wide wheels with -18 offset.

Key features

• 6 inch front coil springs and 5 inch rear lift
• Billet aluminum transfer case clocking ring and heavy-duty transmission crossmember
• Four Bilstein 5100 series shocks
• Fabricated steel radius arm drop, track bar and sway bar brackets
• Dropped cast iron pitman arm and longer bump stops

What's included

• Front coil springs
• Fabricated taper lift blocks with extended U-bolts
• Bilstein 5100 series shocks, front and rear
• Radius arm drop bracket and nut plate
• Sway bar drop brackets, driver and passenger
• Front track bar bracket
• Front and rear brake line brackets, e-brake extensions
• Front replacement bump stops and rear bump stop extension
• Dropped replacement pitman arm
• Transmission crossmember, connector bracket, harness bracket, mounting plate and mount spacer
• 8 bolt clocking ring and transfer case spacer
• Hardware pack

Fitment and compatibility

• Fits 2019-2024 Ram 3500 Standard Output 6.7L diesel 4WD with the 68RFE transmission only; the transmission dipstick is on the passenger side, so verify before ordering
• Will not fit High Output 6.7L diesel with the Aisin transmission, HEMI gasoline engines, dually models, Classic models, trucks with automatic-leveling rear air suspension or single cab trucks
• Fitment is based on Wheel Pros wheels and Nitto tires; test fit every tire and wheel combination

Specifications

• Brand: ReadyLIFT
• Part number: 49-19630
• Front lift: 6 inch
• Rear lift: 5 inch
• Max tire: 37x13.50 on a 9 inch wide wheel with -18 offset
• Shocks included: Yes, Bilstein 5100 series front and rear
• Estimated install time: 13 hours, plus or minus 1 hour

Installation

Allow about 13 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. Alignment may be required afterward, headlamps must be checked and adjusted, and driver-assist systems may need recalibration, sometimes with dealer tools.

Modifying your suspension can change handling and rollover risk (SAE J2492). Always wear your seat belt. California Proposition 65 notice: this product can expose you to DEHP.