ReadyLIFT 4 Inch Terrain Flex Max 4-Arm Lift Kit with Falcon 2.1 Shocks - 2020-2026 Jeep Gladiator (69-6042)

This ReadyLIFT Terrain Flex Max 4-arm kit lifts the 2020-2026 Jeep Gladiator 4 inch in front. It is a bolt-on package with front and rear coil springs, four heavy-duty lower control arms with TCT non-bonded bushings, an adjustable front track bar and four Falcon 2.1 monotube shocks. ReadyLIFT lists up to 37x12.50 tires on Rubicon and 35 inch tires on Sport and Overland models.

Key features

• Linear rate front coil springs and heavy-duty rear coil springs
• Heavy-duty lower control arms with .188 wall, for caster correction and added trail strength
• Terrain Control Technology (TCT) non-bonded, maintenance-free bushings
• Heavy-duty adjustable front track bar and heavy-duty rear track bar bracket
• Falcon 2.1 monotube shocks
• Longer sway bar end links and bump stop extensions

What's included

• Front and rear coil springs
• Heavy-duty lower control arms with TCT maintenance-free non-bonded pivots (4)
• Falcon 2.1 monotube shocks (4)
• Front and rear bump stop extensions
• Front and rear sway bar end links (4)
• Adjustable front track bar (1)
• Heavy-duty rear track bar bracket (1)
• All necessary hardware and instructions

Fitment and compatibility

• Fits 2020-2026 Jeep Gladiator (JT)
• Not for the diesel or Mojave edition
• Not compatible with Wrangler or Gladiator optional powertrains, including the 3.0L Diesel, Rubicon 392 and 4xe editions
• Vehicles with adaptive cruise control need a zero-point calibration at the dealership after the kit is installed
• Rubicon: up to 37x12.50 tires, with a wheel up to 10 inch wide and 0 offset
• Sport and Overland: up to 35 inch tires, with a wheel up to 10 inch wide and -18 offset
• Larger sizes or offsets may be possible with the factory removable front bumper wings or an aftermarket stubby bumper
• Tire recommendations are based on Wheel Pros wheels and Nitto tires. Test fit every combination

Specifications

• Brand: ReadyLIFT
• Part number: 69-6042
• Front lift: 4 inch
• Max tire: 37x12.50 on Rubicon, 35 inch on Sport and Overland
• Material: Steel control arms
• Shocks included: Yes, Falcon 2.1 monotube (4)
• Hardware included: Yes
• Estimated install time: 5 hours, plus or minus 1 hour

Installation

Allow about 5 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. Alignment, headlamp aim and ADAS checks may be needed, and some need OEM dealer tools.

Modifying your suspension can change how the vehicle handles and can raise rollover risk (SAE J2492). Always wear your seat belt, and check your state laws. The ReadyLIFT page carries a California Proposition 65 notice that names DEHP.