ReadyLIFT 4 Inch Front 3 Inch Rear Terrain Flex Lift Kit - 2020-2026 Jeep Gladiator (69-6041)

This ReadyLIFT Terrain Flex 4-arm kit lifts the 2020-2026 Jeep Gladiator 4 inch in front and 3 inch in the rear. The front gets new 4 inch lift coil springs and heavy-duty lower control arms with TCT maintenance-free bushings, the rear keeps the factory dual-rate springs on heavy-duty spacers, and four Falcon 2.1 monotube shocks are included. It is a bolt-on install and clears up to a 37 inch tire on Rubicon models.

Key features

• Front coil springs with a larger wire diameter, meant for heavier loads such as winches and steel bumpers
• Heavy-duty lower control arms (.188 wall) for caster correction and added trail strength
• TCT non-bonded, maintenance-free bushings and flex joints in forged housings for more articulation than factory bushings
• Heavy-duty adjustable front track bar
• Falcon 2.1 gas-charged monotube shocks designed for the JT Gladiator

What's included

• Front coil springs (4 inch lift)
• Heavy-duty rear coil spring spacers that retain the factory dual-rate springs
• 4 heavy-duty lower control arms with TCT pivots
• 4 Falcon 2.1 monotube shocks
• Front and rear bump stop extensions
• 4 front and rear sway bar end links
• 1 adjustable front track bar
• All necessary hardware and instructions

Fitment and compatibility

• Fits 2020-2026 Jeep Gladiator (JT)
• Not for diesel or Mojave Edition vehicles
• Not compatible with Wrangler or Gladiator optional powertrains, including the 3.0L diesel, Rubicon 392 and 4xe
• Vehicles with adaptive cruise control need a zero-point calibration at a dealership after installation
• For heavy off-road use, an aftermarket CV-style front driveshaft is recommended
• Rubicon: up to 37x12.50 on a 10 inch wide wheel, -44 offset. Sport and Overland: 35 inch tire on a 10 inch wide wheel, -18 offset
• Larger tires or offsets may be possible with the factory removable front bumper wings or an aftermarket stubby bumper. Test fit any tire and wheel combination before installing

Specifications

• Brand: ReadyLIFT
• Part number: 69-6041
• Front lift: 4 inch
• Rear lift: 3 inch
• Max tire: 37x12.50 (Rubicon), 35 inch (Sport/Overland)
• Shocks included: Yes, Falcon 2.1 monotube, 4 total
• Estimated install time: 5 hours, plus or minus 1 hour

Installation

Allow about 5 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. An alignment is likely needed, check headlamp aim afterward, and driver-assist systems may need checking, some with OEM dealer tools.

Modifying your suspension can change handling and rollover risk (SAE J2492). Proposition 65: ReadyLIFT lists DEHP for this product.