ReadyLIFT 3 Inch Front 2 Inch Rear SST Lift Kit - 2007-2018 Jeep Wrangler JK 4WD (69-6000)

This ReadyLIFT SST kit lifts the 2007-2018 Jeep Wrangler JK 4WD 3 inch in front using spring spacers, so you keep your OEM coil springs. ReadyLIFT lists room for a 35x12.50 tire on a 9 inch wide wheel with 0 offset. The spacers are powdercoated steel, and the kit adds a track bar relocation bracket, shock extensions and bump stop extensions to keep the factory suspension geometry. Shocks are not included.

Key features

• Powdercoated steel front and rear coil spring spacers
• Panhard (track) bar relocation bracket and shock extensions to maintain factory suspension and alignment geometry
• Front and rear bump stop extension brackets to help preserve OEM compression travel
• Keeps your OEM coil springs
• Includes all necessary hardware and instructions

What's included

• Front and rear steel coil spring spacers
• Rear track bar relocation bracket
• Front and rear shock extensions
• Caster cam bolts
• Bump stop extensions
• All necessary hardware and instructions

Fitment and compatibility

• Fits 2007-2018 Jeep Wrangler JK 4WD
• 2012 and newer vehicles may require driveshaft and exhaust modifications. The ReadyLIFT page points to its Exhaust Down Pipe Extension for the exhaust side
• Some JK vehicles may require aftermarket longer front sway bar end links
• Tire and wheel recommendations are based on Wheel Pros wheels and Nitto tires. Test fit every tire and wheel combination before installing
• Larger E-rated tires can feel stiffer than the stock tires
• Adjustable track bars are listed as frequently bought together, not required

Specifications

• Brand: ReadyLIFT
• Part number: 69-6000
• Front lift: 3 inch
• Max tire: 35x12.50 on a 9 inch wide wheel, 0 offset
• Material: Steel spacers, powdercoated
• Shocks included: No
• Hardware included: Yes
• Estimated install time: 6 hours, plus or minus 1 hour
• Warranty: Lifetime Limited Warranty, per the ReadyLIFT page

Installation

Allow about 6 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. An alignment may be required, check your headlamp aim afterward, and note that driver-assist systems may need recalibration with OEM dealer tools.

Modifying your suspension can change how the vehicle handles and can raise rollover risk (SAE J2492). Always wear your seat belt, and check your state laws. The ReadyLIFT page carries a California Proposition 65 notice that names DEHP. ReadyLIFT states it is not responsible for damage or failure resulting from improper installation.