ReadyLIFT 3.5 Inch Terrain Flex 2-Arm Lift Kit with Falcon 2.1 Shocks - 2018-2026 Jeep Wrangler JL (69-6836)

This ReadyLIFT Terrain Flex 2-arm kit gives the 2018-2026 Jeep Wrangler JL a 3.5 inch lift. It combines four linear-rate coil springs, two heavy-duty DOM tube steel lower control arms with TCT flex joints, and Falcon 2.1 monotube shocks at all four corners. A heavy-duty adjustable front track bar and a rear track bar relocation bracket are included.

Key features

• Two heavy-duty DOM tube steel lower control arms that add ground clearance and improve caster geometry
• Terrain Control Technology (TCT) bushings in forged housings for more articulation than factory bonded bushings
• Four linear design coil springs with increased spring rates
• Falcon 2.1 monotube shocks at all four corners, fixed-rate and custom-tuned
• Heavy-duty adjustable front track bar and rear track bar relocation bracket
• Bump stop extensions

What's included

• Linear rate coil springs (4)
• Falcon 2.1 series shocks (4)
• Heavy-duty lower control arms with Terrain Control Technology flex joints (2)
• Bump stop landings (4)
• Front sway bar end links (2)
• E-brake extension bracket
• Rear track bar relocation bracket
• Front heavy-duty adjustable track bar
• All necessary hardware

Fitment and compatibility

• Fits the 2018-2026 Jeep Wrangler JL
• Not compatible with diesel, Rubicon 392 or 4xe models, or with Wrangler or Gladiator optional powertrains including the 3.0L Diesel
• Tire and wheel recommendations are based on Wheel Pros wheels and Nitto tires. Test fit every combination
• Larger E-rated tires can make the ride feel stiffer
• The 4-arm version of this kit is sold separately as 69-6837

Specifications

• Brand: ReadyLIFT
• Part number: 69-6836
• Lift: 3.5 inch
• Material: DOM tube steel control arms, forged bushing housings
• Shocks included: Yes, Falcon 2.1 monotube (4)
• Hardware included: Yes
• Estimated install time: 6.5 hours, plus or minus 1 hour

Installation

Allow about 6.5 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. Alignment, headlamp aim and ADAS recalibration may be needed, possibly at extra cost.

Modifying your suspension can change how the vehicle handles and can raise rollover risk (SAE J2492). Always wear your seat belt, and check your state laws. The ReadyLIFT page carries a California Proposition 65 notice that names DEHP. ReadyLIFT states it is not responsible for damage or failure resulting from improper installation.