ReadyLIFT 6/5 Inch Falcon MAX3.3 Lift Kit - 2023-2026 Ford F-250 F-350 Super Duty (43-23660)

This ReadyLIFT Falcon MAX3.3 coil spring kit lifts the 2023-2026 Ford F-250 and F-350 Super Duty 6 inches in front with a 5 inch rear lift, and it runs tires up to 37 inches. It is a bolt-on kit with no cutting, welding or fabrication required, and it includes Falcon 3.3 shocks, tubular radius arms and a dual steering stabilizer. It is for 4WD single rear wheel diesel trucks.

Key features

• Falcon 3.3 Fast Adjust piggyback shocks with a 3-position knob (Soft, Custom, Firm) and an 8-position micro adjust dial
• Hard-anodized, large-bore 6061-T6 aluminum shock bodies, Red Line high-VI shock oil and VOD (Volume Optimized Damping) piston
• Heavy-duty tubular radius arms to correct suspension geometry and caster angle
• Dual Falcon steering stabilizer for control with oversized tires on solid axles
• Bolt-on install, no cutting, welding or fabrication

What's included

• 6 inch lift springs
• Falcon 3.3 monotube front and rear shocks
• Track bar relocation bracket
• Radius arm
• Dual steering stabilizer
• Sway bar drops
• Bump stop extensions
• Carrier bearing drop
• Front brake line brackets
• Fabricated rear lift blocks
• Hardware pack

Fitment and compatibility

• Fits 2023-2026 Ford F-250 and F-350 Super Duty Power Stroke 4WD diesel trucks with single rear wheels
• Not recommended for 2WD or gas trucks
• Tremor models will not gain the full 6 inches of lift
• Single Cab has not been validated by ReadyLIFT
• Caster bushings will not work on 10-lug trucks
• Trucks with the Onboard Scale option need the auto-leveling headlight bracket, part number 67-23610
• Recommended tire: 37x12.50 on a 17 inch or larger, 9 inch wide wheel. Minor front valance trimming may be needed. Test fit any tire and wheel combination before installing

Specifications

• Brand: ReadyLIFT
• Part number: 43-23660
• Front lift: 6 inch
• Rear lift: 5 inch
• Max tire: up to 37 inch tall on 9 inch wide wheels
• Shock body: 6061-T6 aluminum, hard anodized
• Shocks included: Yes, Falcon 3.3 front and rear
• Hardware included: Yes
• Estimated install time: 7.5 hours, plus or minus 1 hour

Installation

Allow about 7.5 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT labels it do-it-yourself but recommends a certified mechanic. An alignment, a headlamp aim check and ADAS recalibration may be needed, possibly at extra cost.

Modifying your suspension can change handling and rollover risk (SAE J2492). Always wear your seat belt. Prop 65 notice: this product can expose you to DEHP, a chemical California lists under Proposition 65.