ReadyLIFT 7 Inch Lift Kit with Falcon 2.1 Shocks - 2017-2022 Ford F-250 F-350 Super Duty (49-27722)

ReadyLIFT 7 Inch Lift Kit with Falcon 2.1 Shocks - 2017-2022 Ford F-250 F-350 Super Duty (49-27722)

49-27722

Regular price$2,327.99
/
Shipping calculated at checkout.

This ReadyLIFT kit lifts the 2017-2022 Ford F-250 and F-350 Super Duty 4WD diesel with 7 inch coil springs and Falcon 2.1 monotube shocks. ReadyLIFT says it raises 2020-2022 4WD trucks 7 inches and 2017-2019 trucks 6.5 inches, with room for up to 38 inch tall tires on 9 inch wide wheels with 0 offset. It bolts on with no structural modifications, and the shocks, steering stabilizer and radius arm drops are included.

Key features

  • Falcon 2.1 monotube shocks, front and rear
  • Cast front track bar relocation bracket
  • Heavy-duty radius arm drop brackets
  • Rear fabricated blocks with integrated bump stop tangs
  • Model-specific brake line extension brackets, bump stop extension brackets and front sway bar frame mount extension brackets
  • Caster correction bushing kit and steering stabilizer system
  • Shock build: 2.3 inch body, 6061-T6 aluminum alloy billet piston, 3/4 inch induction-hardened chrome-plated shaft

What's included

  • 7 inch lift springs
  • Falcon 2.1 front and rear shocks
  • Caster correction bushing kit
  • Track bar relocation bracket
  • Radius arm drops
  • Front and rear sway bar drops
  • Bump stop extensions
  • Carrier bearing drop
  • Front brake line brackets
  • Drop pitman arm
  • Steering stabilizer system
  • 6.5 inch rear blocks
  • Hardware pack

Fitment and compatibility

  • Fits 2017-2022 Ford F-250 and F-350 Super Duty
  • ReadyLIFT lists it for 4WD Power Stroke diesel trucks, single rear wheel only
  • Not recommended for 2WD or gas trucks
  • Tremor versions will not gain the full 7 inches over stock ride height and will need longer U-bolts
  • 2017-2019 trucks: ride height may be slightly lower
  • Single cab has not been validated for fitment and drivability by ReadyLIFT
  • Tire fit examples: 38x12.50 on a 9 inch wide wheel with 0 offset, 38x12.5R18, 38x12.5R20 or 325/60R22 depending on wheel size. Recommendations are based on Wheel Pros wheels and Nitto tires, so test fit any combination before installing

Specifications

  • Brand: ReadyLIFT
  • Part number: 49-27722
  • Lift: 7 inch on 2020-2022 trucks, 6.5 inch on 2017-2019 trucks
  • Max tire: 38x12.50 on a 9 inch wide wheel, 0 offset
  • Shocks included: Yes (Falcon 2.1)
  • Estimated install time: 6 hours, plus or minus 1 hour

Installation

Allow about 6 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT labels it do-it-yourself but recommends a certified mechanic. Plan on an alignment, check your headlamp aim afterward, and note that trucks with driver-assist systems may need recalibration with dealer tools.

Modifying your suspension can change handling and increase rollover or loss-of-control risk in sharp turns or abrupt maneuvers, and some modifications may not be permitted in some states. Always wear your seat belt. California Proposition 65: this product can expose you to chemicals including DEHP, which California lists as causing cancer and birth defects or other reproductive harm.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed