This ReadyLIFT kit gives the 2015-2020 Ford F-150 2WD and 4WD up to 2.25 inches of front lift with CNC-machined billet aluminum offset strut spacers. Strut positioning is different on 2015 and newer trucks, so ReadyLIFT designed this offset system specifically for them. A 33x11.50 tire fits with no trimming on a 9 inch wheel with +25 offset, and a 35x11.50 fits with minor trimming.
Key features
- CNC-machined billet aluminum construction
- Offset design made for 2015 and newer F-150 2WD and 4WD
- Provides 2.25 inches of front lift through strut extension
- Uses ReadyLIFT Smart Suspension Technology
What's included
- One pair of CNC-machined billet aluminum offset leveling front spacers
- Hardware
Fitment and compatibility
- Fits 2015-2020 Ford F-150 2WD and 4WD
- Measure from the center of the wheel hub to the bottom edge of the fender at 12 o'clock with the wheels straight. If it measures over 22 inches, the truck already has factory front lift and this is not the correct kit; ReadyLIFT points to 66-2052 (1.5 inch leveling kit) instead
- Using this kit on a truck that measures 22 inches may cause upper control arm interference or excessive ball joint wear
- Not for factory pre-lifted or pre-leveled trucks, or trucks with the off-road package
- Test fit any tire and wheel combination before installing
Specifications
- Brand: ReadyLIFT
- Part number: 66-2215
- Front lift: Up to 2.25 inch
- Max tire: 35 inch diameter with trimming; 33x11.50 with no trimming on a 9 inch wheel with +25 offset
- Material: CNC-machined billet aluminum
- Estimated install time: About 3.5 hours, plus or minus 0.5 hour
- Shipping weight: 4.5 lb
- Package size: 8 x 6.25 x 3 inch
Installation
Allow about 3.5 hours, plus or minus 0.5, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. Plan on an alignment (extra cost), check headlamp aim afterward, and note that driver-assist systems may need recalibration, sometimes with dealer tools. ReadyLIFT is not responsible for damage from improper installation.
Modifying your suspension can change handling and rollover risk (SAE J2492). California Prop 65 notice: the manufacturer lists DEHP.