ReadyLIFT 7 Inch Big Lift Kit - 2014-2016 Chevy GMC Silverado Sierra 1500 (44-34700)
44-34700
This ReadyLIFT kit puts a 7 inch lift under the 2014-2016 Chevy Silverado and GMC Sierra 1500 and clears a 35x12.50 tire on a 9 inch wide wheel with -12 offset. A clam-shell lower strut extension keeps your factory struts, and the kit adds boxed steel crossmembers, a full-width front skid plate, differential drop brackets and fabricated steel rear lift blocks. Falcon 1.1 monotube rear shocks are included. Front shocks are not.
Key features
- Clam-shell lower strut extension that keeps the factory struts, standard or front-only MagneRide
- Retains the factory turning radius, with track width increase under 0.5 inch per side
- Differential drop brackets made from 1/4 inch plate steel
- Rear lift blocks made from 3/16 inch plate steel with bump stop landings
- Falcon 1.1 rear shocks: 2-1/8 inch body, 6061-T6 aluminum billet piston, 1/2 inch induction-hardened chrome-plated shaft and microcellular foam progressive bump stops
What's included
- Clam-shell lower strut extension brackets with TCT lower bushings
- Boxed steel front and rear crossmembers
- Full-width front skid plate
- Differential drop brackets
- Fabricated rear lift blocks
- Extended-length Falcon 1.1 monotube rear shocks
- Hardware
Fitment and compatibility
- Fits 2014-2016 Chevy Silverado and GMC Sierra 1500 with the factory aluminum front suspension (OE aluminum control arms) only. Check your control arm type before ordering
- 2WD or 4WD only. The differential drop brackets are not for AWD
- Works with front-only MagneRide
- Single Cab has not been validated by ReadyLIFT
- Needs a wheel at least 9 inch wide with -12 offset
- Larger E-rated tires may increase ride harshness. Test fit every tire and wheel combination before installing
Specifications
- Brand: ReadyLIFT
- Part number: 44-34700
- Lift: 7 inch
- Max tire: 35x12.50 on a 9 inch wide wheel, -12 offset
- Material: 3/16 inch plate steel (crossmembers, skid plate, rear blocks), 1/4 inch plate steel (differential drop brackets)
- Rear shocks: Falcon 1.1 monotube, included
- Front shocks included: No
- Hardware included: Yes
- Estimated install time: 11 hours, plus or minus 1 hour
Installation
Allow about 11 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. An alignment, a headlamp aim check and ADAS recalibration, possibly with OEM dealer tools, may be needed at extra cost.
Vehicles with a lift kit may handle differently than factory-equipped vehicles (SAE J2492). Drive accordingly and always wear your seat belt. Prop 65 notice: this product can expose you to DEHP, a chemical California lists under Proposition 65.