Radflo 2.0 Hydraulic Bump Stop is a universal hydraulic bump stop, not vehicle specific. Pick your travel length and mount above. Each option is its own Radflo part number, listed in the chart below.
Our hydraulic bump stops are the perfect solution for vehicles that experience suspension bottoming at high speeds or when heavily laden. As the suspension reaches maximum compression, this secondary shock progressively increases damping resistance for maximum impact control.
As a result, the vehicle and occupants are protected from high stress loads. Protects vehicle and driver from high stress loads caused by severe suspension impacts.
Radflo bump stops are engaged during the last few inches of compression travel to help cushion heavy impacts. When used correctly, they can significantly reduce dangerous stress loads that could otherwise harm the vehicle and driver.
This hydraulic bump stop is picked by dimensions, not by vehicle. Confirm collapsed length, extended length, mount types, mounting widths, bolt sizes and chassis clearance before ordering.
Mounting cans are sold separately. Radflo can part numbers line up with the bump stop part numbers (for example MT-5SB00100 goes with 5SB-001-00).
Details:
Part numbers and sizes:
| Part number | Mount | Travel | Extended | Collapsed |
|---|---|---|---|---|
| 5SB-001-00 | Pinch Mount | 2 in | - | - |
| 5SB-001-01 | Pin Mount | 2 in | - | - |
| 5SB-002-00 | Pinch Mount | 3 in | - | - |
| 5SB-002-01 | Pin Mount | 3 in | - | - |
| 5SB-003-00 | Pinch Mount | 4 in | - | - |
| 5SB-003-01 | Pin Mount | 4 in | - | - |
California Proposition 65 warning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov