Synergy Ram 2500 3500 Track Bar 13-25 Adjustable 8704-01

Synergy Heavy-Duty Adjustable Front Track Bar - 2013-2025 Ram 2500/3500 4WD

Eliminate Death Wobble & Center Your Axle - Lifetime Warranty

Maintenance-Free • 0-4" Lift Compatible • Made in USA • No Greasing Required

Is your lifted Ram 2500 or 3500 suffering from death wobble? Does your front axle shift off-center after installing a lift kit? Is your stock track bar flexing and causing steering instability?

The Synergy 8704-01 Heavy-Duty Adjustable Front Track Bar is the ultimate solution for 2013-2025 Ram HD trucks. Featuring maintenance-free Dual Durometer Bushings and bulletproof DOM steel construction, this track bar eliminates death wobble, centers your axle perfectly, and outlasts the competition with a lifetime warranty.

🔥 Why Ram Owners Choose Synergy Track Bars

Death Wobble? Problem Solved.

Death wobble is terrifying—and dangerous. The Synergy 8704-01 track bar significantly improves lateral stiffness over stock, eliminating the flex that causes death wobble.

How It Works:

• 1.5" x .250" wall DOM steel tubing - 3X stronger than stock
• Dual Durometer Bushings (DDB) - Zero deflection under load
• Precision bent design - Optimized geometry for stability
• Forged adjustable ends - No weak points anywhere

The Result: Rock-solid steering stability at highway speeds, even with 37"+ tires and 4" lifts.

Maintenance-Free Dual Durometer Bushings - Never Grease Again

Forget about crawling under your truck with a grease gun every month. Synergy's revolutionary Dual Durometer Bushings are 100% maintenance-free and outlast traditional joints.

DDB Technology:

• Soft outer layer - Isolates road noise and vibration for comfortable ride
• Hard Teflon-infused inner core - Acts as self-lubricating bearing surface
• Sealed design - Keeps dirt and moisture out permanently
• 50+ degrees of articulation - Flexes without binding

Real-World Benefit: Your track bar will never need greasing, never squeak, and deliver smooth, quiet operation for the life of your truck.

Adjustable On-Vehicle - No Removal Required

The Synergy double adjuster sleeve and pinch bolt assembly allows you to adjust track bar length while still on the vehicle. Center your axle in minutes without removing bolts or struggling with jam nuts.

Adjustment Features:

• Tool-free length adjustment - Turn the sleeve by hand
• Pinch bolt locks adjustment - Torque to 90 lb-ft and forget it
• No jam nuts to fight - Traditional track bars use impossible-to-tighten jam nuts
• Fine-tune axle centering - Dial in perfect alignment

Compatible from stock to 4" lift in stock mounting locations. Drop pitman arm recommended for lifts over 4".

Bent to Clear Aftermarket Differential Covers

Unlike straight track bars that interfere with aftermarket diff covers, the Synergy 8704-01 features a strategic bend that clears most aftermarket differential covers without issues.

Clearance for:

• Banks diff covers
• AFE diff covers
• Mag-Hytec diff covers
• PPE diff covers
• Most aftermarket covers

Bulletproof Construction - Lifetime Warranty

Synergy builds this track bar to handle massive tires, aggressive off-road use, and heavy towing without bending or breaking.

Construction Details:

• 1.5" x .250" wall DOM steel tubing - Nearly twice as thick as stock
• Abrasion-resistant powder coat - Maximum corrosion resistance
• Grade 8 hardware included - Professional-grade fasteners
• Forged steel ends - No cast components anywhere

Lifetime Warranty: Synergy backs this track bar with a limited lifetime warranty against manufacturing defects. Built to last forever.

100% Bolt-On Installation - No Modifications

This is a direct bolt-in replacement using factory mounting locations and factory hardware. No drilling, no welding, no modifications required.

Installation Details:

• Time Required: 1-2 hours (basic mechanical skill)
• Tools Needed: 27mm socket, 3/4" wrench, torque wrench
• Modifications: None - completely reversible
• Professional Installation: Most shops can install in 1 hour

Includes detailed step-by-step instructions with photos.

Perfect Complement to Synergy Steering

For ultimate steering performance and guaranteed compatibility, pair this track bar with Synergy's HD Drag Link and Tie Rod. This combination bulletproofs your entire steering system from stock to 4"+ lifts.

Complete Synergy Steering System:

• 8704-01 Adjustable Track Bar (this product)
• Synergy HD Drag Link
• Synergy HD Tie Rod
• Synergy Ball Joints (optional)

✅ What's Included - Complete Kit

(1) Synergy Heavy-Duty Adjustable Front Track Bar

• 1.5" x .250" wall DOM steel construction
• Maintenance-free Dual Durometer Bushings (both ends)
• Double adjuster sleeve assembly
• Strategic bend for diff cover clearance

(1) Grade 8 Hardware Kit

• All mounting bolts and hardware
• Pinch bolt and nut for adjuster
• Flag nut for axle end

(1) Installation Instructions

• Step-by-step guide with photos
• Torque specifications
• Adjustment procedures

🔧 TECHNICAL SPECIFICATIONS