{"product_id":"savvy-rear-trim-kit-corner-guards-6061-aluminum-2018-2026-jeep-jl-jlu","title":"Savvy Rear Trim Kit \u0026 Corner Guards (6061 Aluminum) - 2018-2026 Jeep JL\/JLU","description":"\u003ch2\u003e\u003cstrong\u003eSavvy Offroad Aluminum Rear Trim Kit \u0026amp; Corner Guards | 2018–2026 Jeep Wrangler JL \/ JLU (2-Door \u0026amp; 4-Door)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eSavvy Offroad Aluminum Rear Trim Kit \u0026amp; Corner Guards\u003c\/strong\u003e is the only aluminum rear corner armor system available for the 2018–2026 Jeep Wrangler JL and JLU. While every major competitor makes their JL rear corner armor from heavy steel, Savvy's kit is precision CNC laser-cut from \u003cstrong\u003e3\/16\" 6061 aluminum\u003c\/strong\u003e delivering the same structural protection at a fraction of the weight. It covers the unfinished factory rear body gap that aftermarket bumpers expose, armors the lower body seam against rocks and trail debris, and wraps the vulnerable rear tub corners where trail damage most commonly occurs all in a clean, seamless fitment that looks factory-finished from the outside.\u003c\/p\u003e\n\u003cp\u003eThe rear body tub on the JL and JLU is the single most expensive and difficult piece of sheet metal to replace on the entire vehicle. It connects to the frame, steering, brakes, and electrical harnesses it cannot simply be unbolted and swapped like a fender or door. Protecting it with proper corner armor is one of the highest-value investments a serious JL builder can make. Doing it in aluminum means you get that protection without adding unnecessary weight to the rear of your build.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Where Competitors Use Steel\u003c\/strong\u003e: Most other JL rear corner armor manufacturers use steel. Savvy uses 3\/16\" 6061 aluminum, the same alloy used throughout the Legacy armor system. You get the same structural protection with significantly less weight. Less unsprung rear weight means better handling, better departure angles, and a more capable trail rig overall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloses the Factory Rear Body Gap\u003c\/strong\u003e: When you install an aftermarket rear bumper on a Jeep JL or JLU, the factory bumper's plastic trim is removed leaving an exposed, unfinished gap between the body and the new bumper. The Savvy rear trim kit fills that gap with a clean, precision-fit aluminum panel that looks intentional and integrated rather than unfinished.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects the Rear Body Tub Corners\u003c\/strong\u003e: The lower rear corners of the JL body tub are among the first areas to make contact with rocks, ledges, and trail obstacles. The corner guard wraps tightly around the JL's curves using updated Jeep CAD data, deflecting impacts that would otherwise dent, crack, or compromise the body tub itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rear Departure Clearance\u003c\/strong\u003e: The trim kit is designed to maintain and complement the departure angle improvements made by your aftermarket rear bumper. Low-profile fitment stays out of the way of trail geometry while providing full lower body seam coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/16\" 6061 Aluminum CNC Laser-Cut \u0026amp; CAD-Designed\u003c\/strong\u003e: Built from the same 6061 aluminum alloy used in aerospace and structural applications. CNC laser-cut and CNC-bent using updated Jeep JL CAD models for a seamless, factory-quality fit on both 2-door JL and 4-door JLU models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Most Aftermarket Rear Bumpers\u003c\/strong\u003e: Designed to work alongside aftermarket bumpers including Savvy's own Krawler Lite rear bumper and Legacy rear bumper. Also compatible with stock and modified suspension setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips Raw Aluminum\u003c\/strong\u003e: 6061 aluminum can be left raw for a natural, rugged off-road aesthetic. Or powder coat or paint it to match your Jeep's build color the choice is yours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: CNC laser-cut and engineered using updated Jeep JL CAD data. Designed and built in America to Savvy's race-proven quality standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2026 Jeep Wrangler JL (2-door) and JLU (4-door)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16\" CNC laser-cut 6061 aluminum lightweight and corrosion-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Precision CNC-bent using updated Jeep JL CAD models for exact body fitment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBumper Compatibility:\u003c\/strong\u003e Compatible with most aftermarket rear bumpers and stock configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspension Compatibility:\u003c\/strong\u003e Works with stock and modified suspension setups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum ready for powder coat, paint, or use as-is\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut and bent in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Rear Corner Armor Matters More Than Most JL Owners Realize\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe rear body tub on the Jeep JL and JLU is not like a fender or a door. Those pieces unbolt cleanly and replace in an afternoon. The body tub connects to virtually everything frame, steering, brakes, wiring harnesses. Replacing or repairing it is expensive, time-consuming, and disruptive to the entire build. The lower rear corners are the first area to contact rocks, tree stumps, ledges, and trail obstacles when your departure angle runs tight. A set of corner guards that costs a fraction of a body repair is one of the smartest investments you can make before the damage happens rather than after.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2018–2026 Jeep JL and JLU owners who have installed or are planning to install an aftermarket rear bumper\u003c\/li\u003e\n\u003cli\u003eTrail rigs where the lower rear body tub corners are exposed to rocks and obstacles\u003c\/li\u003e\n\u003cli\u003eBuilders who want to close the factory rear body gap left by aftermarket bumper installation\u003c\/li\u003e\n\u003cli\u003eJL and JLU owners who want aluminum corner armor instead of heavier steel alternatives\u003c\/li\u003e\n\u003cli\u003eBuilds where rear weight reduction matters alongside maximum protection\u003c\/li\u003e\n\u003cli\u003eDaily-driven Jeeps that still see occasional trail use and need real protection without the bulk of steel armor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Choose the Savvy Jeep JL\/JLU Rear Trim Kit \u0026amp; Corner Guards?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep JL\/JLU rear armor\u003c\/strong\u003e options focus only on bumper protection while leaving exposed seams and unfinished body gaps behind. The \u003cstrong\u003eSavvy rear trim kit and corner guards\u003c\/strong\u003e are designed to solve both problems by protecting vulnerable rear body areas and creating a cleaner, more complete rear-end appearance.\u003c\/p\u003e\n\u003cp\u003eFor Jeep owners looking for \u003cstrong\u003eJeep JL corner guards\u003c\/strong\u003e, \u003cstrong\u003eJeep JLU rear trim armor\u003c\/strong\u003e, or a \u003cstrong\u003eclean rear body trim solution\u003c\/strong\u003e that works with off-road builds and aftermarket bumpers, this kit offers a strong combination of \u003cstrong\u003elightweight 6061 aluminum construction, trail-ready protection, improved appearance, and precise fitment\u003c\/strong\u003e. It is an ideal upgrade for Jeep owners who want more protection without sacrificing weight or clearance.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit both the 2-door JL and 4-door JLU?\u003c\/strong\u003e\u003cbr\u003eYes. The Savvy rear trim kit and corner guards are precision-cut for both the 2018–2026 Jeep Wrangler JL 2-door and JLU 4-door models using updated Jeep CAD data.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy aluminum instead of steel for corner armor?\u003c\/strong\u003e\u003cbr\u003eMost JL rear corner armor is made from steel because it is cheaper to form and weld. Savvy uses 3\/16\" 6061 aluminum the same alloy used throughout the Legacy race armor system because it delivers equivalent structural protection at significantly less weight. For a trail rig, less rear weight means better departure angles, better handling, and a more capable build overall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with my aftermarket rear bumper?\u003c\/strong\u003e\u003cbr\u003eYes. The Savvy rear trim kit is compatible with most aftermarket rear bumpers, including Savvy's Krawler Lite and Legacy rear bumpers. It is also compatible with stock configurations. If you are running a non-Savvy bumper, verify the body gap dimensions match before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes installation require drilling into the body tub?\u003c\/strong\u003e\u003cbr\u003eThe JL corner armor products require drilling the body for rivnuts. See the instillations instructions below to see if this is an install you want to complete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003cbr\u003eRaw aluminum. 6061 aluminum has good natural corrosion resistance and can be left unfinished for a clean raw look. Or powder coat or paint to match your Jeep's build color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with modified suspension?\u003c\/strong\u003e\u003cbr\u003eYes. The rear trim kit is designed to work with both stock and modified suspension setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I install this before or after my rear bumper?\u003c\/strong\u003e\u003cbr\u003eWe recommend installing the rear trim kit before or as part of your bumper installation. With the factory bumper removed and your aftermarket bumper trial-fitted, you can verify the exact body gap and corner fitment before final installation of both pieces together.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671303479362,"sku":"SD0015","price":211.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Jeep_JL_Wrangler_rear_corner_guards_aluminum.png?v=1792451691","url":"https:\/\/www.skinnypedalracing.com\/products\/savvy-rear-trim-kit-corner-guards-6061-aluminum-2018-2026-jeep-jl-jlu","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}