{"product_id":"savvy-rear-bumper-legacy-og-high-clearance-aluminum-2020-2026-jeep-jt","title":"Savvy Rear Bumper (Legacy OG High Clearance Aluminum) - 2020-2026 Jeep JT","description":"\u003ch4\u003e\u003cstrong\u003eSavvy Offroad Legacy The Big 10\" Aluminum Rear Bumper | 2020–2026 Jeep Gladiator JT The Complete High-Clearance Rear Bumper System\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eSavvy Offroad Legacy Big 10\" Rear Bumper\u003c\/strong\u003e is the original, most complete high-clearance aluminum rear bumper system ever built for the 2020–2026 Jeep Gladiator JT. Where the Krawler Lite gives you the clearance numbers in a focused bolt on package, the Legacy Big 10 gives you the complete system replaceable\u003cstrong\u003e outer skin, replaceable end caps, and replaceable bed caps\u003c\/strong\u003e that finish the trimmed bed corners with a clean, integrated aluminum panel rather than leaving raw cut edges exposed. \u003cstrong\u003e10 inches of extra departure clearance without a hitch. 6.5 inches with a hitch.\u003c\/strong\u003e Every component modular. Every component is replaceable independently. Nothing permanent except the clearance.\u003c\/p\u003e\n\u003cp\u003eThis is the bumper Savvy designed that set the benchmark for what a purpose-built high-clearance aluminum JT rear bumper should look like, how it should fit, and what it should include.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eThe Big 10\" — What the Number Actually Means\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eTen inches of departure clearance improvement is not a marketing number. It is the measured difference between where the factory JT bumper geometry ends and where the Legacy Big 10” geometry begins and, on a truck, length platform like the Gladiator, that difference determines which trails you can run and which ones you cannot.\u003c\/p\u003e\n\u003cp\u003eThe Gladiator's factory rear bumper hangs low and far back. At the steep exit angles of real rock crawling terrain the kind that makes the Gladiator's longer wheelbase a challenge rather than an advantage the factory bumper catches first. Most aftermarket bumpers gain 4–5 inches of improvement. The Legacy Big 10” gains 10 inches without a hitch. On a Gladiator that gets wheeled seriously, that is the difference between clearing an obstacle and sitting on it while you figure out recovery.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhat Makes the Legacy Big 10” Different from the Krawler Lite\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBoth bumpers deliver the same 10-inch clearance number and share the same core engineering 5052 aluminum skin, steel crossmember, hidden D-ring mounts, JL hitch compatibility, license plate relocation with LED lights, and made in the USA. The Legacy OG goes further in two specific ways:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Clearance Bed caps are included.\u003c\/strong\u003e The Legacy modular system includes replaceable high clearance aluminum bed caps that cover the trimmed bed side corners with a precision-fit aluminum panel. The result is a finished, clean, intentional-looking installation where the transition from bed to bumper is smooth and professional not raw cut edges that show the modification. If you want the complete finished system, the Legacy Big 10” is the right choice.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\" Extra Departure Clearance Without Hitch, 6.5\" With Hitch\u003c\/strong\u003e: The highest clearance numbers of any bolt-on aluminum rear bumper for the Jeep Gladiator JT. Competitors offering comparable clearance either require a permanent bed chop, remove hitch capability, or use steel. The Legacy delivers all three advantages simultaneously maximum clearance, hitch retention, and lightweight aluminum construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Modular System Skin, End Caps \u0026amp; Bed Caps All Replaceable\u003c\/strong\u003e: Every exterior component on the Legacy OG is a separate, independently replaceable part. Outer skin damaged on the trail? Replace the skin. End cap takes a hard hit? Replace the end cap. Bed caps scratched or dented? Replace the bed caps. The structural crossmember and hidden D-ring mounts stay on the Gladiator permanently. This is the most repairable JT rear bumper system available by design, not by accident.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Clearance Aluminum Bed Caps, The Finished Look\u003c\/strong\u003e: The Legacy “Big 10” includes replaceable high clearance aluminum bed caps that cover the trimmed bed side corners after installation. Rather than raw cut edges, you get a precision-fit aluminum panel that integrates cleanly with the bumper and the truck body. This is what separates a complete system from a bumper with a clearance number.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5052 Aluminum Skin + Steel Crossmember\u003c\/strong\u003e: The outer skin is 3\/16\" 5052 aluminum chosen specifically for its corrosion resistance and strength-to-weight performance. The structural crossmember is 3\/16\" steel where the recovery and towing loads go because that is where steel belongs. The Legacy “Big 10” uses both materials where each performs best.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHidden D-Ring Recovery Mounts\u003c\/strong\u003e: 3\/4\" steel recovery points built seamlessly into the bumper structure. Flush and clean when not in use. Strong enough for real winch recoveries. No external bolt-on recovery points adding bulk or snag points to the bumper profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJL-Style Hitch Compatibility\u003c\/strong\u003e: Works with factory Mopar JL hitch (P\/N: 82215209) and plug bracket (P\/N: 68258743AA). Retain real tow capability with the highest departure clearance rear bumper on the Gladiator platform. Note: JK hitches will not fit JL-style hitch required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLicense Plate Relocation with LED Lights, Included\u003c\/strong\u003e: Tailgate-mounted license plate relocation bracket with LED lighting included in the kit. Street-legal out of the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Lighting Ready\u003c\/strong\u003e: Rear skin can be trimmed for Rigid Industries SR-L Flush Mount, Rigid Ignite Flush Mount, and Baja Designs S1 \u0026amp; S2 Non-Flush Mount lights. All lighting sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Trimming Required\u003c\/strong\u003e: The extreme clearance geometry requires trimming of the bedside for proper fitment. Full installation instructions (See below). The bed caps in the kit are designed to finish those trimmed corners cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: CNC laser-cut and bent for precision fitment using updated Jeep Gladiator JT CAD data. Designed, tested, and built in America.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020–2026 Jeep Gladiator JT (all trim levels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16\" 5052 aluminum outer skin + 3\/16\" steel crossmember\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Gain:\u003c\/strong\u003e 10\" without hitch, 6.5\" with hitch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Components:\u003c\/strong\u003e Replaceable outer skin, high clearance end caps, and bed caps all independent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery Points:\u003c\/strong\u003e Hidden integrated 3\/4\" steel D-ring mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHitch:\u003c\/strong\u003e JL-style compatible, Mopar P\/N 82215209 and plug bracket P\/N 68258743AA (JK hitches will not fit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLicense Plate:\u003c\/strong\u003e Tailgate-mounted relocation bracket with LED lights included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Skin trimable for Rigid SR-L Flush Mount, Rigid Ignite Flush Mount, Baja Designs S1 \u0026amp; S2 Non-Flush Mount (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Bed side trimming required for fitment (see instructions below)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum \u0026amp; steel ready for powder coat or paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eLegacy OG vs. Krawler Lite, Which JT Rear Bumper Is Right for You?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBoth the Legacy Big 10” and the Krawler Lite deliver the same 10-inch clearance improvement, the same 5052 aluminum and steel crossmember construction, the same hidden D-ring recovery mounts, the same JL hitch compatibility, and the same license plate relocation with LED lights. The decision comes down to two things.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eLegacy Big 10\"\u003c\/strong\u003e if you want the extra high clearance bed caps that cover the trimmed corners for a clean, integrated appearance. This is the flagship JT rear bumper in the Savvy lineup and the most complete version of the design.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eKrawler Lite\u003c\/strong\u003e if you want the same clearance numbers and core engineering in a bolt on less trimming package. Standard bolt on no trimming side caps.\u003c\/p\u003e\n\u003cp\u003eBoth are the original. Both beat everything else on the JT market. The Legacy “Big 10” is simply the more complete version.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2020–2026 Jeep Gladiator JT owners who want the most complete, high-clearance rear bumper system available\u003c\/li\u003e\n\u003cli\u003eGladiator rock crawlers who want maximum departure clearance with a professional finished appearance after installation\u003c\/li\u003e\n\u003cli\u003eBuilds where the truck doubles as a daily driver and the clean bed cap finish matters as much as the clearance numbers\u003c\/li\u003e\n\u003cli\u003eGladiator owners who tow and need the highest possible clearance without sacrificing hitch capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose the Savvy Legacy OG The Big 10” Rear Bumper?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep Gladiator JT rear bumpers\u003c\/strong\u003e add unnecessary bulk, reduce departure angle, or turn trail damage into an expensive full-bumper replacement. The \u003cstrong\u003eSavvy Legacy Big 10 rear bumper\u003c\/strong\u003e is built differently. It combines \u003cstrong\u003eextreme rear clearance, modular repairability, hidden recovery points, and hitch compatibility\u003c\/strong\u003e into one bumper designed for real off-road use.\u003c\/p\u003e\n\u003cp\u003eFor Gladiator owners looking for a \u003cstrong\u003ehigh-clearance rear bumper for Jeep JT\u003c\/strong\u003e, this design focuses on what matters most: \u003cstrong\u003emore clearance, lighter weight, smarter repairability, clean recovery integration, and proven Jeep-specific fitment\u003c\/strong\u003e. Whether your Gladiator is built for rock crawling, overlanding, or aggressive trail use, this bumper is designed to help your truck clear more obstacles and stay trail-ready longer.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch4\u003e\n\u003cstrong\u003eWhat is the difference between the Legacy OG and the Krawler Lite?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eThe Legacy Big 10 includes high clearance bumper cap and bed trim caps that cover the trimmed bed side corners for a complete, finished installation appearance. The Krawler Lite includes the outer skin and bolt on zero trim end caps but not the bed caps. Both deliver the same 10-inch clearance improvement, the same construction, and the same core features. The Legacy big 10 is the more complete system\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eDoes this require cutting the bed?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eYes, trimming of the bed side is required for proper fitment this is what enables the 10-inch clearance geometry. The high clearance aluminum bed caps in this kit are designed specifically to cover those trimmed corners with a precision-fit panel for a clean finished result. Full installation instructions are below.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eWill my factory JT hitch work with this bumper?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eNo the factory JT hitch will not fit. You will need a JL-style Mopar hitch (P\/N: 82215209) and plug bracket (P\/N: 68258743AA). This is the same hitch used on the Jeep Wrangler JL and is widely available.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eHow is this different from the copies that look similar?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eThe Legacy OG was the original high-clearance aluminum JT rear bumper. The differences from what has followed are specific: 5052 aluminum alloy for corrosion resistance, hidden D-ring mounts integrated into the structure, a fully modular three-component system where skin, end caps, and bed caps all replace independently, CNC precision from updated Jeep JT CAD data. The copies share the visual profile. They do not share the engineering, the material science, or the level of modular repairability that makes this bumper last as long as the Gladiator it is mounted on.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eCan I replace just one component if it gets damaged?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eYes. The outer skin, end caps, and bed caps are all separately orderable replacement components. Order only what was damaged and swap it out.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003eRaw aluminum \u0026amp; steel. Powder coat or paint to your preferred color.\n\u003c\/h4\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671305510978,"sku":"SD0068","price":1456.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/JT_rear_bumper_maximum_departure_angle_profile_10_inches_extra_clearance_no_hitch_Jeep_Gladiator.png?v=1792451778","url":"https:\/\/www.skinnypedalracing.com\/products\/savvy-rear-bumper-legacy-og-high-clearance-aluminum-2020-2026-jeep-jt","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}