{"product_id":"savvy-rear-bumper-legacy-6061-aluminum-1997-2006-jeep-tj-lj","title":"Savvy Rear Bumper (Legacy 6061 Aluminum) - 1997-2006 Jeep TJ\/LJ","description":"\u003ch2\u003e\u003cstrong\u003eSavvy Offroad Legacy 6061 Aluminum Rear Bumper | 1997–2006 Jeep Wrangler TJ \/ LJ Unlimited\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eAt just \u003cstrong\u003e12 lbs\u003c\/strong\u003e, the \u003cstrong\u003eSavvy Offroad Legacy 6061 Aluminum Rear Bumper\u003c\/strong\u003e is the lightest high-clearance rear bumper available for the 1997–2006 Jeep Wrangler TJ and LJ Unlimited and still the tightest-fitting no-frame-chop design on the market for the platform. Built from \u003cstrong\u003e3\/16\" 6061 aluminum\u003c\/strong\u003e with heavy-duty 3\/4\" laser-cut steel D-ring mounts, it delivers maximum departure clearance without a frame chop, with a modular replaceable skin so trail damage never means buying a whole new bumper. Direct bolt-on using factory mounting points. Designed to work with body lifts. Made in the USA.\u003c\/p\u003e\n\u003cp\u003eThe TJ and LJ platform has been off the production line since 2006. The Jeeps being built and wheeled on these platforms today are 18–27 years old and the builders running them are some of the most experienced, most demanding Jeep enthusiasts in the community. The Savvy Legacy TJ rear bumper was built for that builder. Not a budget option. Not a heavy steel compromise. A precision-engineered, race-proven aluminum bumper that respects the platform and the person building it.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTightest Fitting No-Frame-Chop Design for TJ\/LJ\u003c\/strong\u003e: Maximum departure clearance without cutting the frame. The Legacy geometry sits as high and tight against the TJ\/LJ body as a bolt-on bumper can giving you the most clearance available without the permanent commitment of a frame modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnly 12 lbs 6061 Aluminum Construction\u003c\/strong\u003e: 3\/16\" 6061 aluminum is the same aerospace and structural alloy used throughout Savvy's Legacy bumper line chosen for its strength-to-weight ratio and corrosion resistance. At 12 lbs, this is among the lightest TJ\/LJ rear bumpers available in any material. Less rear weight means less stress on the TJ's rear frame rails, better handling, and better trail performance on a platform where rear-end weight matters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Replaceable Rear Skin\u003c\/strong\u003e: The outer aluminum skin is a separate modular component. Take a hard hit on the trail and need a repair? Replace just the skin the D-ring mounts and structural components stay on the Jeep. Faster fix, lower cost, less downtime between runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty D-Ring Recovery Mounts\u003c\/strong\u003e: Two 3\/4\" thick laser-cut steel D-ring shackle mounts provide real recovery capability. Strong enough for winch recoveries. Low-profile enough to not add snag points or visual bulk to the bumper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for Body Lifts Fills the Gap\u003c\/strong\u003e: The Legacy TJ rear bumper is specifically designed to work with body lifts, filling the gap that appears between the body and the frame when a body lift is installed. This is a fitment detail most TJ rear bumper manufacturers do not address Savvy built it into the design from the start.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks on Non-Body-Lifted TJs With a Note\u003c\/strong\u003e: Will fit non-body-lifted TJs when body mounts are new and in good condition. If body mounts are worn which is common on 18–27 year old Jeeps use a 1\/8\"–3\/16\" spacer for proper alignment. This is real-world fitment information that saves you time during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Frame Chop\u003c\/strong\u003e Mounts to factory TJ\/LJ frame mounting points. No cutting, no frame modification required. Some drilling required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips Raw Aluminum\u003c\/strong\u003e: Powder coat or paint to match your build. 6061 aluminum can also be left in raw finish for a natural off-road look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: Precision CNC laser-cut and bent using updated Jeep TJ CAD models for exact fitment on all 1997–2006 TJ and 2004–2006 LJ Unlimited models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 1997–2006 Jeep Wrangler TJ (all years) and 2004–2006 Jeep Wrangler LJ Unlimited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16\" 6061 CNC laser-cut aluminum skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery Points:\u003c\/strong\u003e Two 3\/4\" thick laser-cut steel D-ring shackle mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Modular replaceable rear skin independent of D-ring mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Lift:\u003c\/strong\u003e Designed to work with body lifts fills some of the gap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Lifted Fitment:\u003c\/strong\u003e Works with new body mounts; use 1\/8\"–3\/16\" spacer if body mounts are worn\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum ready for powder coat or paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut and bent in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eTJ\/LJ Specific Fitment What You Need to Know\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Jeep TJ and LJ Unlimited are 1997–2006 vehicles. Every one of them is now at least 18 years old. That matters for rear bumper fitment in a way that does not apply to newer platforms specifically, body mount condition.\u003c\/p\u003e\n\u003cp\u003eThe Savvy Legacy TJ rear bumper is designed to work with body lifts and fills the gap cleanly when a body lift is installed. On a non-body-lifted TJ with new body mounts in good condition, it installs directly to factory mounting points without modification.\u003c\/p\u003e\n\u003cp\u003eOn a non-body-lifted TJ where body mounts have compressed, sagged, or deteriorated over years of trail use which is the majority of TJs at this point in their service life a 1\/8\"–3\/16\" spacer behind the body mount ensures proper bumper alignment and fitment.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure about your body mount condition, inspect them before ordering. Replacement body mounts for the TJ are inexpensive and widely available and if yours need replacing anyway, doing it at the same time as the bumper install is the logical sequence.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1997–2006 Jeep TJ and 2004–2006 LJ Unlimited owners who want the lightest possible high-clearance rear bumper without a frame chop\u003c\/li\u003e\n\u003cli\u003eTJ and LJ builds where rear-end weight reduction matters for trail performance and frame rail stress\u003c\/li\u003e\n\u003cli\u003eBuilders running body lifts who need a bumper that fills the gap cleanly\u003c\/li\u003e\n\u003cli\u003eTJ rock crawlers and trail rigs needing maximum departure clearance without permanent frame modification\u003c\/li\u003e\n\u003cli\u003eExperienced TJ builders who want aluminum — not steel — and a modular design they can repair on the trail\u003c\/li\u003e\n\u003cli\u003eBuilders upgrading from worn-out factory bumpers or heavy steel aftermarket units who want to reduce rear weight on a platform that is already carrying decades of trail use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose the Savvy Legacy 6061 Aluminum Rear Bumper?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep TJ\/LJ rear bumpers\u003c\/strong\u003e add unnecessary weight or require more aggressive modifications to gain clearance. The \u003cstrong\u003eSavvy Legacy rear bumper\u003c\/strong\u003e is designed to deliver \u003cstrong\u003etight fitment, high clearance, lightweight construction, and modular repairability\u003c\/strong\u003e in one clean package.\u003c\/p\u003e\n\u003cp\u003eFor Jeep owners looking for a \u003cstrong\u003eJeep TJ rear bumper\u003c\/strong\u003e or \u003cstrong\u003eJeep LJ rear bumper\u003c\/strong\u003e that improves departure angle, reduces rear weight, and still offers strong recovery capability, this design provides a strong balance of \u003cstrong\u003eclearance, function, serviceability, and clean styling\u003c\/strong\u003e. It is an ideal upgrade for trail rigs, crawlers, and well-built street-and-trail Jeeps alike.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit both the TJ and the LJ Unlimited?\u003c\/strong\u003e\u003cbr\u003eYes. The Savvy Legacy 6061 aluminum rear bumper fits all 1997–2006 Jeep Wrangler TJ models and the 2004–2006 Jeep Wrangler LJ Unlimited using factory mounting points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require a frame chop?\u003c\/strong\u003e\u003cbr\u003eNo. This is a no-frame-chop bolt-on design the tightest fitting no-frame-chop rear bumper available for the TJ\/LJ. It mounts to factory frame mounting points with no cutting, no permanent modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy TJ does not have a body lift, will this still fit?\u003c\/strong\u003e\u003cbr\u003eYes, with one caveat. On a non-body-lifted TJ with new, unworn body mounts, the bumper installs directly to factory mounting points. On a non-body-lifted TJ with worn or compressed body mounts common on Jeeps this age use a 1\/8\"–3\/16\" spacer for proper alignment. Inspect your body mounts before installation and replace them if they are worn.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with a body lift?\u003c\/strong\u003e\u003cbr\u003eYes. The Legacy TJ rear bumper is specifically designed to work with body lifts and fills the gap between body and frame that a body lift creates. This is built into the design not an afterthought.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I replace just the skin if it gets damaged?\u003c\/strong\u003e\u003cbr\u003eYes. The rear aluminum skin is a modular component that replaces independently of the D-ring mounts. Order a replacement skin, swap it out the mounts stay on the Jeep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy aluminum on a TJ when most TJ bumpers are steel?\u003c\/strong\u003e\u003cbr\u003eThe TJ rear frame rails and crossmember are a known weak point on the platform. Adding 30–50 lbs of steel bumper to that rear end compounds the stress on aging frame components. At 12 lbs, the Savvy Legacy aluminum rear bumper puts dramatically less load on the TJ's rear frame than any comparable steel bumper. On a platform this age, that difference matters more than it does on a new JL or JT.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003cbr\u003eRaw aluminum. Powder coat or paint to your preferred color, or leave it natural — 6061 aluminum holds up well unfinished for an off-road aesthetic.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671302561858,"sku":"SD0043","price":1137.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Savvy_Jeep_TJ_LJ_Rear_Bumper.png?v=1792451631","url":"https:\/\/www.skinnypedalracing.com\/products\/savvy-rear-bumper-legacy-6061-aluminum-1997-2006-jeep-tj-lj","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}