{"product_id":"readylift-6-inch-big-lift-kit-2022-2026-toyota-tundra-44-52620","title":"ReadyLIFT 6 Inch Big Lift Kit - 2022-2026 Toyota Tundra (44-52620)","description":"\u003cp\u003eThis ReadyLIFT big lift kit gives the 2022-2026 Toyota Tundra a 6 inch lift with 6 inch rear coil springs and Falcon 1.1 monotube rear shocks. It fits 35 inch tires on 20x9 wheels without trimming, or 37 inch tires with trimming, keeps the factory turning radius and works with the auto adjust headlights. This is the rear coil spring kit. Front shocks are not included.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLaser cut, CNC bent, welded and boxed sub-frame drop assemblies\u003c\/li\u003e\n\u003cli\u003eCNC-machined cast iron front knuckles that keep the factory tie rods with minimal trimming\u003c\/li\u003e\n\u003cli\u003eFalcon 1.1 monotube rear shocks tuned for the 2022 and newer Tundra\u003c\/li\u003e\n\u003cli\u003eBump stop extensions at all four corners\u003c\/li\u003e\n\u003cli\u003eSway bar frame mount brackets that keep the front sway bar in factory geometry\u003c\/li\u003e\n\u003cli\u003eDifferential drop system that maintains CV axle and driveline angles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront and rear crossmembers and skid plate\u003c\/li\u003e\n\u003cli\u003eFront strut spacer\u003c\/li\u003e\n\u003cli\u003eLeft and right knuckles\u003c\/li\u003e\n\u003cli\u003eFront sway bar drops, left and right, and rear sway bar drops, left and right\u003c\/li\u003e\n\u003cli\u003eFront brake line brackets\u003c\/li\u003e\n\u003cli\u003eCam block off plates, headlight sensor bracket sleeve and left bracket\u003c\/li\u003e\n\u003cli\u003eFront and rear bump stops and rear bump stop extension\u003c\/li\u003e\n\u003cli\u003eRear trackbar bracket, rear crossmember nut plate, rear ABS relocator and bracket\u003c\/li\u003e\n\u003cli\u003e1\/4 inch front differential vent hose\u003c\/li\u003e\n\u003cli\u003e6 inch rear coil springs\u003c\/li\u003e\n\u003cli\u003eFalcon 1.1 rear shocks\u003c\/li\u003e\n\u003cli\u003eHardware pack and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 2022-2026 Toyota Tundra 2WD and 4WD with rear coil springs. For rear air suspension trucks, ReadyLIFT lists 44-52660\u003c\/li\u003e\n\u003cli\u003eNot compatible with Tundra TRD Pro with Bilstein coilovers, the TRD rear sway bar or AVS (Advanced Vehicle Suspension)\u003c\/li\u003e\n\u003cli\u003eStock wheels cannot be reused. Most aftermarket 20 inch and larger wheels are compatible, but verify fitment before installing\u003c\/li\u003e\n\u003cli\u003e35 inch tires: 20x9 wheel with 5.75 inch backspace (18-20mm offset). 37 inch tires: 20x9 wheel with 5.5 inch backspace (10-13mm offset), trimming required\u003c\/li\u003e\n\u003cli\u003eReadyLIFT recommends a CV axle kit on all lifted 2022 and newer Tundras (67-52420CV High-Performance CV Axle kit). Not using one in 4WD may lead to damage the manufacturer does not cover\u003c\/li\u003e\n\u003cli\u003eRecommendations are based on Wheel Pros wheels and Nitto tires. Test fit every combination\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLIFT\u003c\/li\u003e\n\u003cli\u003ePart number: 44-52620\u003c\/li\u003e\n\u003cli\u003eLift: 6 inch\u003c\/li\u003e\n\u003cli\u003eMax tire: 35 inch without trimming, 37 inch with trimming\u003c\/li\u003e\n\u003cli\u003eRear shocks: Falcon 1.1 monotube, included\u003c\/li\u003e\n\u003cli\u003eFront shocks included: No\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eEstimated install time: 12 hours, plus or minus 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eAllow about 12 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. An alignment, a headlamp aim check and ADAS recalibration, possibly with OEM dealer tools, may be needed at extra cost.\u003c\/p\u003e\u003cp\u003eModifying your suspension can change handling, and failing to drive safely can result in serious injury or death (SAE J2492). Always wear your seat belt. Prop 65 notice: this product can expose you to DEHP, a chemical California lists under Proposition 65.\u003c\/p\u003e","brand":"ReadyLIFT","offers":[{"title":"Default Title","offer_id":45534364663874,"sku":"44-52620","price":2443.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/rls-44-52620_jc_xl.jpg?v=1791767701","url":"https:\/\/www.skinnypedalracing.com\/products\/readylift-6-inch-big-lift-kit-2022-2026-toyota-tundra-44-52620","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}