{"product_id":"free-spin-kit-2012-2018-dodge-2500-and-3500-with-warn-hubs","title":"Free-Spin Kit 2012-2024 Dodge 2500 and 3500 with Warn Hubs","description":"\u003cp\u003eThe Dynatrac Free-Spin hub conversion kit, SKU DT CR60-3X1104-K, replaces the factory unit bearings on 2012-2024 Dodge Ram 2500 and 3500 4x4 trucks with a fixed-spindle setup. It combines heat-treated chromoly spindles, serviceable Timken bearings and seals, and 35-spline, 1.50-inch outer axle shafts with Warn Premium locking hubs. Installation is bolt-on, with no machining or welding, and Dynatrac states the kits are made in the USA.\u003c\/p\u003e\u003ch2\u003eWhy convert away from unit bearings\u003c\/h2\u003e\u003cp\u003eA factory unit bearing is a sealed assembly. Dynatrac describes it as non-serviceable, impossible to inspect, and prone to failure, so when it goes bad the entire unit is replaced. The Free-Spin conversion changes the front end to a conventional spindle with separate inner and outer tapered roller bearings, races, and a hub seal, so you can pull the hub, inspect the bearings, repack them, and replace only what is worn. Dynatrac lists a smoother ride, better fuel economy, and longer axle life as benefits of the design. Those are manufacturer claims, and results depend on the truck, tires, and driving.\u003c\/p\u003e\u003ch2\u003eWhat is in the kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeat-treated chromoly spindles\u003c\/li\u003e\n\u003cli\u003eCast nodular wheel hubs\u003c\/li\u003e\n\u003cli\u003eServiceable Timken bearings, races, and seals\u003c\/li\u003e\n\u003cli\u003e35-spline, 1.50-inch outer axle shafts\u003c\/li\u003e\n\u003cli\u003eWarn Premium manual locking hubs\u003c\/li\u003e\n\u003cli\u003eWheel studs and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWarn locking hubs\u003c\/h2\u003e\u003cp\u003eThis kit uses Warn Premium manual locking hubs, the standard hub in Dynatrac's Free-Spin line. They are 35-spline to match the outer shafts and are turned by hand: set them to lock before you engage four-wheel drive, and set them to free for street driving so the wheels turn without dragging the outer axle shafts along. Warn is the lower-priced of the two hub options Dynatrac offers. If you would rather have the shorter DynaLoc hub, the DynaLoc version of this kit is a separate listing in our catalog.\u003c\/p\u003e\u003ch2\u003eFitment for 2012-2024 Dodge Ram 2500 and 3500\u003c\/h2\u003e\u003cp\u003eThis kit is listed for 2012-2024 Dodge Ram 2500 and 3500 4x4 trucks, and it comes with a wheel restriction that matters more than any other fitment detail: Dynatrac says the kit will not fit most 2014-and-newer factory Dodge wheels, and that wheels need a center hole or a removable center cap for hub clearance. Retailers that carry the kit add that OEM wheels with a center cap will not fit and aftermarket wheels are required. Dynatrac offers a downloadable fitment notification with more detail. Dual rear wheel trucks need Arrowcraft dually wheel adapter AA4DDT (248-280-0210).\u003c\/p\u003e\u003ch2\u003eService parts are easy to find\u003c\/h2\u003e\u003cp\u003eDynatrac says every Free-Spin kit uses K30 bearings and seals, so replacements come from ordinary bearing suppliers. The common wear items are the Timken 387A inner bearing with 382A race, the Timken LM104949 outer bearing with LM104911 race, and the Timken 475960 hub seal. The spindle hardware is a Spicer 33732 six-point nut and 33733 washer, and the axle-end parts are the Spicer 700014 spindle needle bearing, 44506 thrust washer and seal combo, and 50381 boot seal.\u003c\/p\u003e\u003ch2\u003eBefore you order\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConfirm the truck is a 2012-2024 Dodge Ram 2500 or 3500 4x4 and that your model year falls inside that range.\u003c\/li\u003e\n\u003cli\u003eWhile the knuckles are apart, it is a sensible time to replace the axle u-joints and ball joints, so order those with the kit if they are due.\u003c\/li\u003e\n\u003cli\u003eDynatrac backs the kit with a one-year, unlimited-mileage written warranty.\u003c\/li\u003e\n\u003cli\u003eIf anything about your truck's year, axle, or wheels is unclear, contact Skinny Pedal Racing with your model year and cab and chassis type before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Dynatrac","offers":[{"title":"Default Title","offer_id":45244292464706,"sku":"DT CR60-3X1104-K","price":2135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Warn.5_158808f4-6eba-4d27-9572-b2735126cabc.jpg?v=1789852983","url":"https:\/\/www.skinnypedalracing.com\/products\/free-spin-kit-2012-2018-dodge-2500-and-3500-with-warn-hubs","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}