{"title":"Toyota Sequoia Lift Kits and Leveling Kits","description":"\u003cp\u003eLift kits and suspension parts for the Toyota Sequoia, including the ReadyLIFT 3.5 inch front, 2.5 inch rear SST lift kit for 2023 and newer, plus ICON suspension.\u003c\/p\u003e","products":[{"product_id":"readylift-3-5-inch-front-2-5-inch-rear-sst-lift-kit-2023-2026-toyota-sequoia-69-53300","title":"ReadyLIFT 3.5 Inch Front 2.5 Inch Rear SST Lift Kit - 2023-2026 Toyota Sequoia (69-53300)","description":"\u003cp\u003eThis ReadyLIFT SST kit lifts the 2023-2026 Toyota Sequoia 3.5 inches in front and 2.5 inches in the rear. It's a bolt-on, no-cut, no-weld kit built around heavy-duty tubular steel control arms, fabricated steel front strut spacers, rear coil spring spacers and rear shock extensions so the factory shocks stay in use. It fits up to a 285\/75R17 tire on a 17x8.5 wheel with +25 offset without trimming.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty tubular steel control arms with corrected ball joint geometry\u003c\/li\u003e\n\u003cli\u003eFabricated steel front strut spacers\u003c\/li\u003e\n\u003cli\u003eFabricated rear coil spring spacers\u003c\/li\u003e\n\u003cli\u003eRear shock extensions so the factory shocks can be reused\u003c\/li\u003e\n\u003cli\u003eBolt-on installation, no cutting or welding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControl arms, strut spacers, coil spring spacers and shock extensions (quantities not listed)\u003c\/li\u003e\n\u003cli\u003eFront differential drop, brake line relocation brackets (left and right) and end link spacer\u003c\/li\u003e\n\u003cli\u003eCrush sleeve and polyurethane bushing\u003c\/li\u003e\n\u003cli\u003eRear brake line spacer and relocation bracket\u003c\/li\u003e\n\u003cli\u003eRear bump stop extensions (left and right) and bump stop crush sleeve\u003c\/li\u003e\n\u003cli\u003eHardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 2023-2026 Toyota Sequoia\u003c\/li\u003e\n\u003cli\u003eNot compatible with TRD Pro, Adaptive Variable Suspension (AVS) or factory air suspension\u003c\/li\u003e\n\u003cli\u003eThe TRD skid plate will not work with this kit\u003c\/li\u003e\n\u003cli\u003e285\/75R17 fits a 17x8.5 +25 wheel with no trimming; 295\/75R17 needs minor trimming\u003c\/li\u003e\n\u003cli\u003eTire and wheel recommendations are based on Wheel Pros wheels and Nitto tires; test fit each combination. Larger E-rated tires can ride stiffer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLIFT\u003c\/li\u003e\n\u003cli\u003ePart number: 69-53300\u003c\/li\u003e\n\u003cli\u003eFront lift: 3.5 inch\u003c\/li\u003e\n\u003cli\u003eRear lift: 2.5 inch\u003c\/li\u003e\n\u003cli\u003eMax tire: 285\/75R17 on a 17x8.5 wheel with +25 offset (295\/75R17 with minor trimming)\u003c\/li\u003e\n\u003cli\u003eMaterial: tubular steel control arms, fabricated steel front strut spacers\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eEstimated install time: about 5 hours, plus or minus 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eAllow about 5 hours, plus or minus 1, not counting alignment or wheel and tire assembly. A certified mechanic is recommended. Alignment, headlamp aim and driver-assist recalibration may be needed at extra cost.\u003c\/p\u003e\u003cp\u003eModifying your suspension can change handling and rollover risk (SAE J2492). Do not drive the vehicle until you are familiar with its handling. ReadyLIFT lists a California Prop 65 notice for DEHP.\u003c\/p\u003e","brand":"ReadyLIFT","offers":[{"title":"Default Title","offer_id":45534707712066,"sku":"69-53300","price":999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/rls-69-53300_xl.jpg?v=1791768198"},{"product_id":"icon-2023-2026-toyota-sequoia-rear-hydraulic-bump-stop-kit-0-4-lift-56114","title":"ICON 2023-2026 Toyota Sequoia Rear Hydraulic Bump Stop Kit 0-4\" Lift (56114)","description":"\u003cp\u003eWhile the factory rear bump stops do a satisfactory job of absorbing impacts on a street driven truck, ICON found that there was much room for improvement during spirited driving in rough, off-road terrain. The ICON Vehicle Dynamics 2023-2026 Toyota Sequoia Rear Hydraulic Bump Stop System was designed to take the off-road capability of the truck to new levels by significantly improving the bottom-out control of the rear suspension and reducing rear end kick.\u003c\/p\u003e\u003cp\u003eLike all ICON hydraulic bumps stops, these feature both velocity and position sensitive technology which means that as the shaft speed increases and moves through the travel, the force increases exponentially to provide excellent bottoming resistance that won't negatively affect articulation. This hydraulic bump stop system was developed as an OEM replacement, making installation a simple and straightforward bolt-on affair.\u003c\/p\u003e\u003cp\u003eWith no major cutting, welding, or fabrication required you have the option to return the vehicle back to its stock form. The factory rubber bump stops have a limited energy absorption capacity and a rapid release of this energy upon rebound - This translates into a harsh ride and poor handling in rough terrain. ICON hydraulic bump stops absorb and release this energy in a much more controlled manner due to the digressive rebound piston valving, resulting in predictable handling and vehicle dynamics.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850978910274,"sku":"56114","price":1185.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/1b3731783169288596520727d5f864bd_f76ce106-7213-4260-a29b-4d5915556d3f.jpg?v=1793303235"},{"product_id":"icon-2023-2026-toyota-sequoia-rear-2-lift-dual-rate-coil-spring-kit-51212","title":"ICON 2023-2026 Toyota Sequoia Rear 2\" Lift Dual Rate Coil Spring Kit (51212)","description":"\u003cp\u003eICON Dual Rate rear coil springs for 2023-2026 Sequoia provide 2\" of rear lift height over stock as well as greatly enhancing on- and off-road performance, especially when used with ICON shocks and suspension components. The dual-rate coil design provides a softer ride rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eLike all ICON coil springs, they feature a lifetime guarantee against sagging\/breakage to produce confidence in knowing that you have the best suspension products available for the 2023-2026 Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851024228418,"sku":"51212","price":410.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/95fe9d3d1089e4a5c10b0bf9b8f130ee.jpg?v=1793303411"},{"product_id":"icon-2007-2021-toyota-tundra-2008-2021-land-cruiser-200-series-2008-2022-sequoia-bump-stop-spacer-kit-front","title":"ICON 2007-2021 Toyota Tundra\/2008-2021 Land Cruiser 200 Series\/2008-2022 Sequoia Bump Stop Spacer Kit Front","description":"\u003cp\u003eThe ICON bump stop spacer kit drops OE front bump stops of 2007-2021 Toyota Tunda, 2008-2021 Toyota Land Cruiser 200 Series, and 2008-2022 Toyota Sequoia models by .25\" to limit up travel for clearance of larger tires when the suspension is fully compressed. These laser cut bump stop spacers are also useful to limit travel to prevent coil bind when adjusting coilovers beyond their maximum recommended spec in an effort to achieve taller ride heights oh heavier equipped vehicles.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851114602562,"sku":"51046","price":28.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/841c95ba4e962ee3507de104f25e3d9f_0620e836-61db-4edd-8c26-8f051030d1ad.jpg?v=1793303903"},{"product_id":"icon-2022-2026-toyota-tundra-2023-2026-sequoia-2024-2026-tacoma-2024-2026-land-cruiser-250-series-2025-2026-4runner-lexus-gx550-tubular-upper-link-kit","title":"ICON 2022-2026 Toyota Tundra\/2023-2026 Sequoia\/2024-2026 Tacoma\/2024-2026 Land Cruiser 250 Series\/2025-2026 4Runner\/Lexus GX550 Tubular Upper Link Kit","description":"\u003cp\u003eThe ICON Tubular Rear Upper Link System helps free up rear axle movement on the 2022-2026 Toyota Tundra, 2023-2026 Toyota Sequoia, 2024-2026 Toyota Tacoma, 2024-2026 Toyota Land Cruiser 250 Series, 2025-2026 Toyota 4Runner, and the 2024-2026 Lexus GX550 to allow for increased suspension travel and articulation. Formed using 1 ¾\" x .313 wall DOM Tubing for high strength, with CNC machined threaded ends and bushing housings, and feature a multi-stage black powder coat finish.\u003c\/p\u003e\u003cp\u003eThese upper links are designed with massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. The quality rod ends and bushings featured in these link arms allow the vehicle's suspension to function as intended, without the bushing bind that limits the vehicle in stock form.\u003c\/p\u003e\u003cp\u003eHit the trail with the confidence of knowing your suspension components are covered by ICON's Limited Lifetime Warranty.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851232075842,"sku":"54102T","price":640.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/2256127fe60c1515b99031856f8f7ab9.jpg?v=1793304494"},{"product_id":"icon-2022-2026-toyota-tundra-2023-2026-sequoia-2024-2026-tacoma-rear-tubular-lower-link-kit","title":"ICON 2022-2026 Toyota Tundra\/2023-2026 Sequoia\/2024-2026 Tacoma Rear Tubular Lower Link Kit","description":"\u003cp\u003eThe ICON Tubular Rear Lower Link System helps free up rear axle movement on the 2022-2026 Toyota Tundra, 2023-2026 Toyota Sequoia, and 2024-2026 Toyota Tacoma to allow for increased suspension travel and articulation. Formed using 1 ¾\" x .313 wall DOM Tubing for high strength, with CNC machined threaded ends and bushing housings, and feature a multi-stage black powder coat finish.\u003c\/p\u003e\u003cp\u003eThese lower links are designed specifically for high clearance for reduced contact with trail obstacles and massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. The quality rod ends and bushings featured in these link arms allow the vehicle's suspension to function as intended, without the bushing bind that limits the vehicle in stock form.\u003c\/p\u003e\u003cp\u003eHit the trail with the confidence of knowing your suspension components are covered by ICON's Limited Lifetime Warranty.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851236204610,"sku":"54002T","price":747.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/ecfb4305160bd76d3e3d10dd54a95532.jpg?v=1793304561"},{"product_id":"icon-2022-2026-toyota-tundra-2023-2026-sequoia-2024-2026-tacoma-rear-billet-lower-link-kit","title":"ICON 2022-2026 Toyota Tundra\/2023-2026 Sequoia\/2024-2026 Tacoma Rear Billet Lower Link Kit","description":"\u003cp\u003eICON's billet aluminum rear lower link arms for the 2022-2026 Toyota Tundra, 2023-2026 Toyota Sequoia, and 2024-2026 Toyota Tacoma are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units.\u003c\/p\u003e\u003cp\u003eThis rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe quality rod ends and bushings featured in these link arms allow the vehicle's suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON's engineering team has also gone a step further in the development of these products by incorporating features such replaceable nylon rock sliders to prevent any hang-ups on the trail.\u003c\/p\u003e\u003cp\u003eAfter the design phase was completed ICON engineers put these parts through the \"ICON1K\" real-world test cycle for a final stamp of approval.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851239088194,"sku":"54002","price":1494.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/87c48c4e39dca466b10b7a7f1231ab8d.jpg?v=1793304591"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-5-suspension-system-tubular-trd-k53235ts","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 5 Suspension System Tubular TRD (K53235TS)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 4 system with the upgrade of the 2.0 Aluminum Series rear shocks to remote reservoir versions. This system offers improved on- and off-road performance, with greater rear shock heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 2.0 remote reservoir rear shocks, dual rate rear coils, a 2.5 Series internal reservoir front coilover shock and tubular front upper control arm combo is included along with a front sway bar drop kit. This Stage 5 system features the 2023-2026 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet aluminum front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. The included ICON tubular upper control arm kit is designed to improve the overall performance of the new 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 5 suspension system are V.S. 2.0 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851243085890,"sku":"K53235TS","price":3654.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/f2772df1619220915fc40e8e20991da0.jpg?v=1793304692"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-25-lift-stage-2-3-0-suspension-system-billet-cdcv","title":"ICON 2023-2026 Toyota Sequoia 3-4.25\" Lift Stage 2 3.0 Suspension System Billet CDCV","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 2 3.0 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 1 3.0 system with the upgrade to 3.0 Series remote reservoir rear shocks. This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front and rear-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 3.0 Series rear shocks, 3.0 Series CDCV remote reservoir front coilovers are included along with billet front upper control arms, a billet rear upper\/lower link combo, a front sway bar drop kit, adjustable rear track bar, and dual rate rear coil springs. This Stage 2 system features the 2023-2026 Toyota Sequoia VS 3.0 Series remote reservoir front coilovers equipped with CDC Valves.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.25\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eAdditionally, ICON's Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eICON billet aluminum adjustable rear upper and lower links are made from CNC machined 6061 aluminum and anodized for corrosion resistance. These link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 2 suspension system are 3.0 Series rear remote reservoir shocks specially tailored for the 2023-2026 Sequoia. 3.0 Series shocks boast 50% more piston surface area compared to 2.5 Series shocks, offering outstanding performance off-road and a smooth ride on the street. Increased internal oil volume and more external surface area compared to 2.5 Series Shocks, plus their remote reservoirs, offer even greater heat dissipation and resistance to shock fade under hard use.\u003c\/p\u003e\u003cp\u003eAlso equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 3.0 Series CDCV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851244396610,"sku":"K53252","price":10548.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/29f653bb8db01a425ae2fe77bf010374.jpg?v=1793304724"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-25-lift-stage-4-3-0-suspension-system-tubular-k53254t","title":"ICON 2023-2026 Toyota Sequoia 3-4.25\" Lift Stage 4 3.0 Suspension System Tubular (K53254T)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 3.0 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 12 2.5 suspension system with the upgrade to 3.0 Series CDEV front coilovers. This system offers improved on- and off-road performance, with active electronic shock damping adjustment, as well as improved alignment specs, improved rear articulation, and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis Stage 4 system features the 2023-2026 Toyota Sequoia VS 3.0 Series remote reservoir front coilovers equipped with CDE Valves. These adjustable coilovers allow up to 3-4.25\" of lift height adjustability over stock when using the ICON tubular front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock.\u003c\/p\u003e\u003cp\u003eControl the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. Additionally, ICON's Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. ICON tubular steel adjustable rear upper and lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003eThese rear link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear. The ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eThe track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links. Rounding out the Stage 4 suspension system are 3.0 Series rear remote reservoir shocks specially tailored for the 2023-2026 Sequoia. 3.0 Series shocks boast 50% more piston surface area compared to 2.5 Series shocks, offering outstanding performance off-road and a smooth ride on the street.\u003c\/p\u003e\u003cp\u003eIncreased internal oil volume and more external surface area compared to 2.5 Series Shocks, plus their remote reservoirs, offer even greater heat dissipation and resistance to shock fade under hard use. Also equipped with CDE Valves, these offer active, on the fly compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 3.0 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851245314114,"sku":"K53254T","price":10371.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/f2f558f11cf2f2bafcfead3cba8cc34f.jpg?v=1793304743"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-6-suspension-system-tubular-k53236t","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 6 Suspension System Tubular (K53236T)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 6 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 5 system with the upgrade of the 2.5 Series front coilovers to remote reservoir versions. This system offers improved on- and off-road performance, with greater front and rear shock heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the remote reservoir coilover shock and tubular steel upper control arm combo, a sway bar drop kit for the front of the truck is included along with our dual rate coil springs and proven 2.0 nitrogen charged monotube shocks with remote reservoirs for the rear. This Stage 6 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 6 suspension system are V.S. 2.0 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851246788674,"sku":"K53236T","price":3952.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/dacc2b1e315fcf41bfc2943da725bef8.jpg?v=1793304777"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-10-suspension-system-tubular-cdxs","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 10 Suspension System Tubular CDXS","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 10 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 9 system with the addition of billet aluminum upper and lower rear links and an adjustable rear track bar. This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front and rear-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the billet rear link and track bar combo, a billet front upper control arm kit is included along with a front sway bar drop kit and dual rate rear coil springs and CDXS 2.5 Series coilovers and rear shocks. This Stage 10 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers equipped with CDXS. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eThese coilovers also feature ICON's exclusive Compression Damping Dual Speed (CDXS) valves for precisely dialing in your suspension performance. CDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the new 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. ICON tubular steel adjustable rear upper and lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003eThese rear link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear. The ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eThe track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links. Rounding out the Stage 10 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street.\u003c\/p\u003e\u003cp\u003eRemote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDXS, these offer 10 settings of low and high speed compression damping adjustment from soft to hard.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851252162626,"sku":"K53240TD","price":7493.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/f894576ef017c916dcef4f9bf6f0aae1.jpg?v=1793304843"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-10-suspension-system-tubular-cdxs-trd","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 10 Suspension System Tubular CDXS TRD","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 10 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 9 system with the addition of billet aluminum upper and lower rear links and an adjustable rear track bar. This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front and rear-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the billet rear link and track bar combo, a billet front upper control arm kit is included along with a front sway bar drop kit and dual rate rear coil springs and CDXS 2.5 Series coilovers and rear shocks. This Stage 10 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers equipped with CDXS. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eThese coilovers also feature ICON's exclusive Compression Damping Dual Speed (CDXS) valves for precisely dialing in your suspension performance. CDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the new 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. ICON tubular steel adjustable rear upper and lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003eThese rear link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear. The ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eThe track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links. Rounding out the Stage 10 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street.\u003c\/p\u003e\u003cp\u003eRemote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDXS, these offer 10 settings of compression damping adjustment from soft to hard.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851252293698,"sku":"K53240TDS","price":7510.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/b6c3e3bd537ac22995652cd37b08742d.jpg?v=1793304846"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-8-suspension-system-tubular-k53238t","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 8 Suspension System Tubular (K53238T)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 8 complete suspension system for the 2023-2026 Toyota Sequoia helps to free up the rear suspension movement while gaining strength and ground clearance with the addition of ICON billet aluminum rear lower links. This system offers improved on- and off-road performance, with significantly increased rear shock performance and heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the billet aluminum rear lower links, a 2.5 Series remote reservoir front coilover shock and tubular steel front upper control arm combo is included along with a front sway bar drop kit, dual rate rear coil springs and 2.5 Aluminum Series rear remote reservoir shocks. This Stage 8 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eICON tubular steel adjustable rear lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 8 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eThey also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Their pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851258912834,"sku":"K53238T","price":5376.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/46cbfc15af066c2f8f8e85a209cda021.jpg?v=1793304981"},{"product_id":"icon-2022-2026-toyota-tundra-2023-2026-sequoia-2024-2026-lexus-gx550-rear-foam-bump-stop-kit","title":"ICON 2022-2026 Toyota Tundra\/2023-2026 Sequoia\/2024-2026 Lexus GX550 Rear Foam Bump Stop Kit","description":"\u003cp\u003eThis Rear Bump Stop Kit for 2022-2026 Toyota Tundra, 2023-2025 Toyota Sequoia, and 2024-2026 Lexus GX550 provides improved performance over the OE bump stops with an easy bolt-on installation. The micro-cellular foam material is more compliant than the hard, stock rubber material and will help to soften bottom-outs when the suspension reaches full compression.\u003c\/p\u003e\u003cp\u003eThe progressive bump stop design keeps the bump stop compliant to avoid jarring impacts on smaller bumps yet ramps up on harder bottom outs to absorb more energy, further improving suspension performance and ride quality.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851261108290,"sku":"56112","price":192.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/03151de99f7a69e56ff63d72a22feccb.jpg?v=1793305040"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-25-lift-stage-2-3-0-suspension-system-tubular-cdcv","title":"ICON 2023-2026 Toyota Sequoia 3-4.25\" Lift Stage 2 3.0 Suspension System Tubular CDCV","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 2 3.0 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 1 3.0 system with the upgrade to 3.0 Series remote reservoir rear shocks. This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front and rear-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 3.0 Series rear shocks, 3.0 Series CDCV remote reservoir front coilovers are included along with tubular front upper control arms, a billet rear upper\/lower link combo, a front sway bar drop kit, adjustable rear track bar, and dual rate rear coil springs. This Stage 2 system features the 2023-2026 Toyota Sequoia VS 3.0 Series remote reservoir front coilovers equipped with CDC Valves.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.25\" of lift height adjustability over stock when using the ICON tubular front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eAdditionally, ICON's Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions. The included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eICON tubular steel adjustable rear upper and lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance. These rear link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 2 suspension system are 3.0 Series rear remote reservoir shocks specially tailored for the 2023-2026 Sequoia. 3.0 Series shocks boast 50% more piston surface area compared to 2.5 Series shocks, offering outstanding performance off-road and a smooth ride on the street. Increased internal oil volume and more external surface area compared to 2.5 Series Shocks, plus their remote reservoirs, offer even greater heat dissipation and resistance to shock fade under hard use.\u003c\/p\u003e\u003cp\u003eAlso equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 3.0 Series CDCV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851263893570,"sku":"K53252T","price":8792.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/08a6847e8ee821c4b8aa54e28d8c0eca.jpg?v=1793305106"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-25-lift-stage-1-3-0-suspension-system-billet-cdcv","title":"ICON 2023-2026 Toyota Sequoia 3-4.25\" Lift Stage 1 3.0 Suspension System Billet CDCV","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 1 3.0 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 10 2.5 suspension system with the upgrade to 3.0 Series front coilovers. This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front and rear-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 3.0 Series coilover shocks, 2.5 Aluminum Series CDCV rear remote reservoir shocks are included along with billet front upper control arms, a billet rear upper\/lower link combo, a front sway bar drop kit, adjustable rear track bar, and dual rate rear coil springs. This Stage 1 system features the 2023-2026 Toyota Sequoia VS 3.0 Series remote reservoir front coilovers equipped with CDC Valves.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.25\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eAdditionally, ICON's Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eICON billet aluminum adjustable rear upper and lower links are made from CNC machined 6061 aluminum and anodized for corrosion resistance. These link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 1 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eThey also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851266678850,"sku":"K53251","price":10014.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/c3e3b11c2e6e4fe5724a7f04529289b1.jpg?v=1793305158"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-11-suspension-system-tubular-k53241t","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 11 Suspension System Tubular (K53241T)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 11 complete suspension system for the 2023-2026 Toyota Sequoia Is the first stage to include CDEV equipped 2.5 Series coilovers and rear shocks. This system offers improved on- and off-road performance, with active electronic shock damping adjustment, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eFocus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. This Stage 11 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers equipped with CDEV. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet aluminum front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear. Rounding out the Stage 11 suspension system are 2.5 Aluminum Series rear remote reservoir shocks with CDEV specially tailored for the 2023-2026 Toyota Sequoia.\u003c\/p\u003e\u003cp\u003eThe 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON V.S. 2.5 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851269431362,"sku":"K53241T","price":6980.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/740b185910c51de9ed24099b0f22336a.jpg?v=1793305232"},{"product_id":"icon-2022-2026-toyota-tundra-2023-2026-toyota-sequoia-front-foam-bump-stop-kit-56113","title":"ICON 2022-2026 Toyota Tundra\/2023-2026 Toyota Sequoia Front Foam Bump Stop Kit (56113)","description":"\u003cp\u003eThis Front Bump stop Kit for 2022-2026 Toyota Tundra and 2023-2026 Toyota Sequoia provides improved performance over the OE bump stops with an easy bolt-on installation. The micro-cellular foam material is more compliant and will help to soften bottom-outs when the suspension reaches full compression.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851273756738,"sku":"56113","price":113.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/e74fa74854cee9e2d40687684c8a4deb.jpg?v=1793305300"},{"product_id":"icon-2022-2026-toyota-tundra-2023-2026-sequoia-2024-2026-tacoma-2024-2026-land-cruiser-250-series-2025-2026-4runner-lexus-gx550-rear-billet-upper-link-kit-gold-anodizing","title":"ICON 2022-2026 Toyota Tundra\/2023-2026 Sequoia\/2024-2026 Tacoma\/2024-2026 Land Cruiser 250 Series\/2025-2026 4Runner\/Lexus GX550 Rear Billet Upper Link Kit Gold Anodizing","description":"\u003cp\u003eICON's billet aluminum rear upper link arms for the 2022-2026 Toyota Tundra, 2023-2026 Toyota Sequoia, 2024-2026 Toyota Tacoma, 2024-2026 Toyota Land Cruiser 250 Series, 2025-2026 Toyota 4Runner, and 2024-2026 Lexus GX550 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units.\u003c\/p\u003e\u003cp\u003eAn all-new gold anodized finish matches ICON shock absorbers for a splash of color in the wheel well and provide a custom look to any build. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe quality rod ends and bushings featured in these link arms allow the vehicle's suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the \"ICON1K\" real-world test cycle for a final stamp of approval.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851274051650,"sku":"54102G","price":1174.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/3acc389f60cb72c9c3a1952325833b30.jpg?v=1793305306"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-25-lift-stage-1-3-0-suspension-system-tubular-cdcv","title":"ICON 2023-2026 Toyota Sequoia 3-4.25\" Lift Stage 1 3.0 Suspension System Tubular CDCV","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 1 3.0 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 10 2.5 suspension system with the upgrade to 3.0 Series front coilovers. This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front and rear-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 3.0 Series coilover shocks, 2.5 Aluminum Series CDCV rear remote reservoir shocks are included along with tubular front upper control arms, a billet rear upper\/lower link combo, a front sway bar drop kit, adjustable rear track bar, and dual rate rear coil springs. This Stage 1 system features the 2023-2026 Toyota Sequoia VS 3.0 Series remote reservoir front coilovers equipped with CDC Valves.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.25\" of lift height adjustability over stock when using the ICON tubular front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eAdditionally, ICON's Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions. The included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eICON tubular steel adjustable rear upper and lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance. These rear link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 1 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eThey also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851275132994,"sku":"K53251T","price":8257.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/ca1499091b687fd5b84555d5747f5133.jpg?v=1793305327"},{"product_id":"icon-2022-2026-toyota-tundra-2023-2026-sequoia-2024-2026-tacoma-rear-billet-lower-link-kit-gold-anodizing","title":"ICON 2022-2026 Toyota Tundra\/2023-2026 Sequoia\/2024-2026 Tacoma Rear Billet Lower Link Kit Gold Anodizing","description":"\u003cp\u003eICON's billet aluminum rear lower link arms for the 2022-2026 Toyota Tundra, 2023-2026 Toyota Sequoia, and 2024-2026 Toyota Tacoma are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units.\u003c\/p\u003e\u003cp\u003eAn all-new gold anodized finish matches ICON shock absorbers for a splash of color in the wheel well and provide a custom look to any build. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe quality rod ends and bushings featured in these link arms allow the vehicle's suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON's engineering team has also gone a step further in the development of these products by incorporating features such replaceable nylon rock sliders to prevent any hang-ups on the trail.\u003c\/p\u003e\u003cp\u003eAfter the design phase was completed ICON engineers put these parts through the \"ICON1K\" real-world test cycle for a final stamp of approval.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851275624514,"sku":"54002G","price":1581.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/da1a1cfa6830ad4a7e5f29b78205f2d0.jpg?v=1793305333"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-7-suspension-system-billet-trd-k53237s","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 7 Suspension System Billet TRD (K53237S)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 6 system with the upgrade of the rear shocks to 2.5 Aluminum Series shocks with remote reservoirs. This system offers improved on- and off-road performance, with significantly increased rear shock performance and heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 2.5 Aluminum Series remote reservoir rear shocks, dual rate rear coils are included with a 2.5 Series remote reservoir front coilover shock and billet front upper control arm combo and a front sway bar drop kit. This Stage 7 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear. Rounding out the Stage 7 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia.\u003c\/p\u003e\u003cp\u003eThe 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851275952194,"sku":"K53237S","price":5194.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/3ff83f02fac5bbf54d7c621bced06e77.jpg?v=1793305340"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-7-suspension-system-tubular-trd-k53237ts","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 7 Suspension System Tubular TRD (K53237TS)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 6 system with the upgrade of the rear shocks to 2.5 Aluminum Series shocks with remote reservoirs. This system offers improved on- and off-road performance, with significantly increased rear shock performance and heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 2.5 Aluminum Series remote reservoir rear shocks, dual rate rear coils are included with a 2.5 Series remote reservoir front coilover shock and tubular front upper control arm combo and a front sway bar drop kit. This Stage 7 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear. Rounding out the Stage 7 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia.\u003c\/p\u003e\u003cp\u003eThe 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851277590594,"sku":"K53237TS","price":4645.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/0b703ebd7b98c99b561c6325ccb44a27.jpg?v=1793305375"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-6-suspension-system-tubular-trd-k53236ts","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 6 Suspension System Tubular TRD (K53236TS)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 6 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 5 system with the upgrade of the 2.5 Series front coilovers to remote reservoir versions. This system offers improved on- and off-road performance, with greater front and rear shock heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the remote reservoir coilover shock and tubular steel upper control arm combo, a sway bar drop kit for the front of the truck is included along with our dual rate coil springs and proven 2.0 nitrogen charged monotube shocks with remote reservoirs for the rear. This Stage 6 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 6 suspension system are V.S. 2.0 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851278377026,"sku":"K53236TS","price":3969.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/ebe9ba69251eec3f048974023b634665.jpg?v=1793305399"},{"product_id":"icon-2023-2026-toyota-sequoia-trd-pro-1-2-5-lift-stage-1-2-5-suspension-system-k53391","title":"ICON 2023-2026 Toyota Sequoia TRD Pro 1-2.5\" Lift Stage 1 2.5 Suspension System (K53391)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 1 complete suspension system for the 2023-2026 Toyota Sequoia TRD Pro is specifically designed to retain the stock billet aluminum front upper control arms found on Sequoia TRD Pro while providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis system features 2.5 Series coilover shocks for the front of the truck along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear. This Stage 1 system features the 2023-2026 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers with a vehicle specific shock length to allow compatibility with the stock front upper control arms found on the Sequoia TRD Pro.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 1-2.5\" of front lift height adjustability over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible with the OE front upper control arms along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for taller rear ride heights, these coil springs yield 2\" of rear lift over stock on a Sequoia TRD Pro, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 1 suspension system are V.S. 2.0 Aluminum Series rear shocks specially tailored for the 2023-2026 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Their pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia TRD Pro.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851284832322,"sku":"K53391","price":2490.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/e352ca3bca20de13b247bbaa4e0ad758.jpg?v=1793305495"},{"product_id":"icon-2023-2026-toyota-sequoia-3-3-75-lift-stage-3-suspension-system-trd-k53233s","title":"ICON 2023-2026 Toyota Sequoia 3-3.75\" Lift Stage 3 Suspension System TRD (K53233S)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 complete suspension system for the 2023-2026 Toyota Sequoia is our most basic system that features complete ICON threaded-body V.S. 2.5 Series Coilovers in the front, providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires. This system features the innovative new 2.5 EXP series coilover shocks and sway bar drop kit for the front of the truck along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear.\u003c\/p\u003e\u003cp\u003eThis Stage 3 system features the 2023-2026 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers. These adjustable coilovers allow up to 3-3.75\" of lift height adjustability over stock when using the OE upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear. Rounding out the Stage 3 suspension system are V.S. 2.0 Aluminum Series rear shocks specially tailored for the 2023-2026 Sequoia.\u003c\/p\u003e\u003cp\u003eThe 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Their pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851285717058,"sku":"K53233S","price":2570.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/9150427bb26a188d4a781e6beb09d4d0.jpg?v=1793305519"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-5-suspension-system-billet-k53235","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 5 Suspension System Billet (K53235)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 4 system with the upgrade of the 2.0 Aluminum Series rear shocks to remote reservoir versions. This system offers improved on- and off-road performance, with greater rear shock heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 2.0 remote reservoir rear shocks, dual rate rear coils, a 2.5 Series internal reservoir front coilover shock and billet front upper control arm combo is included along with a front sway bar drop kit. This Stage 5 system features the 2023-2026 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet aluminum front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 5 suspension system are V.S. 2.0 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851287912514,"sku":"K53235","price":4186.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/b896acd13521aa795ee5fae25de9a117.jpg?v=1793305571"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-10-suspension-system-billet-cdcv-k53240","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 10 Suspension System Billet CDCV (K53240)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 10 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 9 system with the addition of billet aluminum upper and lower rear links and an adjustable rear track bar. This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front and rear-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the billet rear link and track bar combo, a billet front upper control arm kit is included along with a front sway bar drop kit and dual rate rear coil springs and CDCV 2.5 Series coilovers and rear shocks. This Stage 10 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers equipped with CDC Valves.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eICON billet aluminum adjustable rear upper and lower links are made from CNC machined 6061 aluminum and anodized for corrosion resistance. These link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 10 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eThey also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851289256002,"sku":"K53240","price":8852.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/b0244469c0d270e45211c38d16b16e8c.jpg?v=1793305604"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-7-suspension-system-tubular-k53237t","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 7 Suspension System Tubular (K53237T)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 6 system with the upgrade of the rear shocks to 2.5 Aluminum Series shocks with remote reservoirs. This system offers improved on- and off-road performance, with significantly increased rear shock performance and heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 2.5 Aluminum Series remote reservoir rear shocks, dual rate rear coils are included with a 2.5 Series remote reservoir front coilover shock and tubular front upper control arm combo and a front sway bar drop kit. This Stage 7 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear. Rounding out the Stage 7 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia.\u003c\/p\u003e\u003cp\u003eThe 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851289944130,"sku":"K53237T","price":4629.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/31a04dbf1f856a91045adad8c1261916.jpg?v=1793305623"},{"product_id":"icon-2023-2026-toyota-sequoia-trd-pro-1-2-5-lift-stage-10-2-5-suspension-system-tubular","title":"ICON 2023-2026 Toyota Sequoia TRD Pro 1-2.5\" Lift Stage 10 2.5 Suspension System Tubular","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 10 complete suspension system for the 2023-2026 Toyota Sequoia TRD Pro is specifically designed to retain the stock billet aluminum front upper control arms found on Sequoia TRD Pro while providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis system features 2.5 Series remote reservoir coilover shocks with CDEV for the front of the truck along with dual rate coil springs, rear upper and lower tubular links, adjustable track bar, and our proven 2.5 Aluminum Series shocks with remote reservoirs and CDEV for the rear. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock.\u003c\/p\u003e\u003cp\u003eControl the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. This Stage 10 system features the 2023-2026 Toyota Sequoia VS 2.5 Series CDEV remote reservoir front coilovers with a vehicle specific shock length to allow compatibility with the stock front upper control arms found on the Sequoia TRD Pro.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 1-2.5\" of front lift height adjustability over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible with the OE front upper control arms along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed.\u003c\/p\u003e\u003cp\u003eThis infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV's hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.\u003c\/p\u003e\u003cp\u003eICON tubular steel adjustable rear upper and lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance. These rear link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for taller rear ride heights, these coil springs yield 2\" of rear lift over stock on a Sequoia TRD Pro, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 10 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eThey also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Their pairing with the ICON V.S. 2.5 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851301838914,"sku":"K53400T","price":7937.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/c0db666ae77b2db20244b48f76d5e203.jpg?v=1793305836"},{"product_id":"icon-2022-2026-toyota-tundra-2023-2026-sequoia-2024-2026-tacoma-2024-2026-land-cruiser-250-series-2025-2026-4runner-2024-2026-lexus-gx550-rear-billet-adj-track-bar-kit","title":"ICON 2022-2026 Toyota Tundra\/2023-2026 Sequoia\/2024-2026 Tacoma\/2024-2026 Land Cruiser 250 Series\/2025-2026 4Runner\/2024-2026 Lexus GX550 Rear Billet Adj Track Bar Kit","description":"\u003cp\u003eThe ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2022-2026 Toyota Tundra, 2023-2026 Toyota Sequoia, 2024-2026 Toyota Tacoma, 2024-2026 Toyota Land Cruiser 250 Series, 2025-2026 Toyota 4Runner, or 2024-2026 Lexus GX550. Threaded rod ends allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eSimply loosen the jam nuts then rotate the bar, using the machined wrench flats, to adjust link length. This allows for easy correction of axle location and dialing in precise tracking whenever adjustments are made to ride height. Additionally, the use of FK Rod End bearings eliminates the rubber bushings found in the stock track bar, eliminating bind and deflection during aggressive driving and greatly improving rear end articulation and the vehicle's overall handling characteristics.\u003c\/p\u003e\u003cp\u003eThis track bar is CNC machined from solid 6061 aluminum bar and anodized to match the look of ICON's billet upper and lower links for a high-end appearance besides high performance. Hit the trail with the confidence of knowing your suspension components are covered by ICON's Limited Lifetime Warranty.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851304132674,"sku":"54202","price":455.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/39ecc2968e95a67af211659c4daf0b1b.jpg?v=1793305892"},{"product_id":"icon-2022-2026-toyota-tundra-2023-2026-sequoia-front-tubular-upper-control-arms-w-delta-joint-pro","title":"ICON 2022-2026 Toyota Tundra\/2023-2026 Sequoia Front Tubular Upper Control Arms w\/Delta Joint Pro","description":"\u003cp\u003eThese tubular steel upper control arms free up your 2022-2026 Toyota Tundra's or 2023-2026 Toyota Sequoia's front suspension movement to allow maximum travel for performance shocks and coilovers at an easier price point compared to our range-topping billet components. Additional caster is built in to correct geometry to allow for better front-end alignment on lifted vehicles.\u003c\/p\u003e\u003cp\u003eThe all-new Delta Joint PRO provides a host of durability and performance improvements compared to our standard Delta Joints, including up to 90° of free articulation to maximize suspension travel without bind. It's also larger and fully rebuildable. The Delta Joint PRO's grease fitting is protected by an anodized billet aluminum dust cap, included with the kit.\u003c\/p\u003e\u003cp\u003eServiceable Heavy Duty Dual Stage bushings at the frame pivots are greaseable and rebuildable, and fit into precision machined bushing housings to ensure a responsive driving experience. ICON Tubular Upper Control Arms are constructed of heavy wall DOM tubing, CNC formed and fixture welded before receiving our multi-stage black powder coat finish. Includes all components and hardware necessary for a complete install, these tubular UCAs are the perfect front end upgrade for the 2022-2026 Toyota Tundra and 2023-2026 Toyota Sequoia.\u003c\/p\u003e\u003cp\u003eICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints.\u003c\/p\u003e\u003cp\u003eThe Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other.\u003c\/p\u003e\u003cp\u003eThis represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface.\u003c\/p\u003e\u003cp\u003eWe also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851304558658,"sku":"58461DJ","price":861.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/12f7a879107491e39c716e31c7310d2f.jpg?v=1793305905"},{"product_id":"icon-2023-2026-toyota-sequoia-0-2-13-lift-stage-2-suspension-system-tubular-uca-k53232t","title":"ICON 2023-2026 Toyota Sequoia 0-2.13\" Lift Stage 2 Suspension System Tubular UCA (K53232T)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 2 complete suspension system for the 2023-2026 Toyota Sequoia builds on ICON's 2.5 EXP Shock Kit with the addition of tubular front upper control arms, providing proper alignment at any ride height, improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis system features the innovative new 2.5 EXP series coilover shocks and sway bar drop kit for the front of the truck along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear. This Stage 2 system features the 2023-2026 Toyota Sequoia EXP Series front shock absorbers that combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the Sequoia's factory coil spring and other components.\u003c\/p\u003e\u003cp\u003eEXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package. The included ICON tubular upper control arm kit is designed to improve the overall performance of the new 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. 2\" of rear lift height over stock allows a for level stance front to rear. Rounding out the Stage 2 suspension system are V.S. 2.0 Aluminum Series rear shocks specially tailored for the 2023-2026 Sequoia.\u003c\/p\u003e\u003cp\u003eThe 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Their pairing with the ICON 2.5 EXP Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851312029762,"sku":"K53232T","price":2806.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/20a4e4d768756604bbb89234b2e26d8a.jpg?v=1793305984"},{"product_id":"icon-2023-2026-toyota-sequoia-trd-pro-1-2-5-lift-stage-7-2-5-suspension-system-billet","title":"ICON 2023-2026 Toyota Sequoia TRD Pro 1-2.5\" Lift Stage 7 2.5 Suspension System Billet","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 complete suspension system for the 2023-2026 Toyota Sequoia TRD Pro is specifically designed to retain the stock billet aluminum front upper control arms found on Sequoia TRD Pro while providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis system features 2.5 Series remote reservoir coilover shocks with CDCV for the front of the truck along with dual rate coil springs, billet aluminum rear upper and lower links, adjustable rear track bar, and our proven 2.5 Aluminum Series shocks with remote reservoirs and CDCV for the rear. This Stage 7 system features the 2023-2026 Toyota Sequoia VS 2.5 Series CDCV remote reservoir front coilovers with a vehicle specific shock length to allow compatibility with the stock front upper control arms found on the Sequoia TRD Pro.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 1-2.5\" of front lift height adjustability over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible with the OE front upper control arms along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 2\" of rear lift over stock on a Sequoia TRD Pro, allowing for level a stance front to rear. ICON billet aluminum adjustable rear upper and lower links are made from CNC machined 6061 aluminum and anodized for corrosion resistance. These link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system.\u003c\/p\u003e\u003cp\u003eAdditionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance. The ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eThe track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links. Rounding out the Stage 7 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street.\u003c\/p\u003e\u003cp\u003eRemote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851312291906,"sku":"K53397","price":7418.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/fa4f65116f481088144b5dd49437bdf5.jpg?v=1793305992"},{"product_id":"icon-2023-2026-toyota-sequoia-trd-pro-1-2-5-lift-stage-6-2-5-suspension-system-tubular","title":"ICON 2023-2026 Toyota Sequoia TRD Pro 1-2.5\" Lift Stage 6 2.5 Suspension System Tubular","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 6 complete suspension system for the 2023-2026 Toyota Sequoia TRD Pro is specifically designed to retain the stock billet aluminum front upper control arms found on Sequoia TRD Pro while providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis system features 2.5 Series remote reservoir coilover shocks with CDCV for the front of the truck along with dual rate coil springs, billet aluminum rear lower links, and our proven 2.5 Aluminum Series shocks with remote reservoirs and CDCV for the rear. This Stage 6 system features the 2023-2026 Toyota Sequoia VS 2.5 Series CDCV remote reservoir front coilovers with a vehicle specific shock length to allow compatibility with the stock front upper control arms found on the Sequoia TRD Pro.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 1-2.5\" of front lift height adjustability over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible with the OE front upper control arms along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 2\" of rear lift over stock on a Sequoia TRD Pro, allowing for level a stance front to rear. ICON tubular steel adjustable rear lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability.\u003c\/p\u003e\u003cp\u003eAdditionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance. Rounding out the Stage 6 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street.\u003c\/p\u003e\u003cp\u003eRemote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851312357442,"sku":"K53396T","price":5075.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/3b27d95ff23ff7c04d5ca801b31aa01e.jpg?v=1793305994"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-4-suspension-system-billet-trd-k53234s","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 4 Suspension System Billet TRD (K53234S)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the ICON threaded-body V.S. 2.5 Series Coilovers with the addition of adjustable billet aluminum front upper control arms. This system offers improved on- and off-road performance as well as improved alignment specs with front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the internal reservoir coilover shock and billet control arm combo, a sway bar drop kit for the front of the truck is included along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear. This Stage 4 system features the 2023-2026 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet aluminum front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear. Rounding out the Stage 4 suspension system are V.S. 2.0 Aluminum Series rear shocks specially tailored for the 2023-2026 Sequoia.\u003c\/p\u003e\u003cp\u003eThe 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Their pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851312619586,"sku":"K53234S","price":3981.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/e8aae9168bd5c99ba38ad8f1a08a00ba.jpg?v=1793305999"},{"product_id":"icon-2023-2026-toyota-sequoia-trd-pro-1-2-5-lift-stage-8-2-5-suspension-system-k53398","title":"ICON 2023-2026 Toyota Sequoia TRD Pro 1-2.5\" Lift Stage 8 2.5 Suspension System (K53398)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 8 complete suspension system for the 2023-2026 Toyota Sequoia TRD Pro is specifically designed to retain the stock billet aluminum front upper control arms found on Sequoia TRD Pro while providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis system features 2.5 Series remote reservoir coilover shocks with CDEV for the front of the truck along with dual rate coil springs and our proven 2.5 Aluminum Series shocks with remote reservoirs and CDEV for the rear. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock.\u003c\/p\u003e\u003cp\u003eControl the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. This Stage 8 system features the 2023-2026 Toyota Sequoia VS 2.5 Series CDEV remote reservoir front coilovers with a vehicle specific shock length to allow compatibility with the stock front upper control arms found on the Sequoia TRD Pro.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 1-2.5\" of front lift height adjustability over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible with the OE front upper control arms along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed.\u003c\/p\u003e\u003cp\u003eThis infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV's hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for taller rear ride heights, these coil springs yield 2\" of rear lift over stock on a Sequoia TRD Pro, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 8 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eThey also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Their pairing with the ICON V.S. 2.5 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851313963074,"sku":"K53398","price":6054.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/97ecc40e648ce05594d3a91356b4abf0.jpg?v=1793306018"},{"product_id":"icon-2023-2026-toyota-sequoia-trd-pro-1-2-5-lift-stage-7-2-5-suspension-system-tubular","title":"ICON 2023-2026 Toyota Sequoia TRD Pro 1-2.5\" Lift Stage 7 2.5 Suspension System Tubular","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 7 complete suspension system for the 2023-2026 Toyota Sequoia TRD Pro is specifically designed to retain the stock billet aluminum front upper control arms found on Sequoia TRD Pro while providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis system features 2.5 Series remote reservoir coilover shocks with CDCV for the front of the truck along with dual rate coil springs, tubular rear upper and lower links, adjustable billet rear track bar, and our proven 2.5 Aluminum Series shocks with remote reservoirs and CDCV for the rear. This Stage 7 system features the 2023-2026 Toyota Sequoia VS 2.5 Series CDCV remote reservoir front coilovers with a vehicle specific shock length to allow compatibility with the stock front upper control arms found on the Sequoia TRD Pro.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 1-2.5\" of front lift height adjustability over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible with the OE front upper control arms along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 2\" of rear lift over stock on a Sequoia TRD Pro, allowing for level a stance front to rear. ICON tubular steel adjustable rear upper and lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance. These rear link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability.\u003c\/p\u003e\u003cp\u003eAdditionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance. The ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eThe track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links. Rounding out the Stage 7 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street.\u003c\/p\u003e\u003cp\u003eRemote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851314192450,"sku":"K53397T","price":6211.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/1a7c56fc61c94d085d00b4628f4222e4.jpg?v=1793306025"},{"product_id":"icon-2023-2026-toyota-sequoia-trd-pro-1-2-5-lift-stage-5-2-5-suspension-system-k53395","title":"ICON 2023-2026 Toyota Sequoia TRD Pro 1-2.5\" Lift Stage 5 2.5 Suspension System (K53395)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 complete suspension system for the 2023-2026 Toyota Sequoia TRD Pro is specifically designed to retain the stock billet aluminum front upper control arms found on Sequoia TRD Pro while providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis system features 2.5 Series remote reservoir coilover shocks with CDCV for the front of the truck along with dual rate coil springs and our proven 2.5 Aluminum Series shocks with remote reservoirs and CDCV for the rear. This Stage 5 system features the 2023-2026 Toyota Sequoia VS 2.5 Series CDCV remote reservoir front coilovers with a vehicle specific shock length to allow compatibility with the stock front upper control arms found on the Sequoia TRD Pro.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 1-2.5\" of front lift height adjustability over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible with the OE front upper control arms along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 2\" of rear lift over stock on a Sequoia TRD Pro, allowing for level a stance front to rear. Rounding out the Stage 5 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street.\u003c\/p\u003e\u003cp\u003eRemote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851315306562,"sku":"K53395","price":4328.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/d77e7eec52b51a5af285009c0d02ce42.jpg?v=1793306041"},{"product_id":"icon-2023-2026-toyota-sequoia-trd-pro-1-2-5-lift-stage-3-2-5-suspension-system-k53393","title":"ICON 2023-2026 Toyota Sequoia TRD Pro 1-2.5\" Lift Stage 3 2.5 Suspension System (K53393)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 complete suspension system for the 2023-2026 Toyota Sequoia TRD Pro is specifically designed to retain the stock billet aluminum front upper control arms found on Sequoia TRD Pro while providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis system features 2.5 Series remote reservoir coilover shocks for the front of the truck along with dual rate coil springs and our proven 2.5 Aluminum Series shocks with remote reservoirs for the rear. This Stage 3 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers with a vehicle specific shock length to allow compatibility with the stock front upper control arms found on the Sequoia TRD Pro.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 1-2.5\" of front lift height adjustability over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible with the OE front upper control arms along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 2\" of rear lift over stock on a Sequoia TRD Pro, allowing for level a stance front to rear. Rounding out the Stage 3 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street.\u003c\/p\u003e\u003cp\u003eRemote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Their pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851315503170,"sku":"K53393","price":3703.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/c61815fef5c00540f2b926f4141cd4a5.jpg?v=1793306044"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-4-suspension-system-tubular-trd-k53234ts","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 4 Suspension System Tubular TRD (K53234TS)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the ICON threaded-body V.S. 2.5 Series Coilovers with the addition of ICON tubular front upper control arms. This system offers improved on- and off-road performance as well as improved alignment specs with front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the internal reservoir coilover shock and tubular control arm combo, a sway bar drop kit for the front of the truck is included along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear. This Stage 4 system features the 2023-2026 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON tubular steel front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear. Rounding out the Stage 4 suspension system are V.S. 2.0 Aluminum Series rear shocks specially tailored for the 2023-2026 Sequoia.\u003c\/p\u003e\u003cp\u003eThe 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Their pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851315798082,"sku":"K53234TS","price":3432.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/d3360b925e82c53cba85c5e6bb7a2141.jpg?v=1793306051"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-5-suspension-system-billet-trd-k53235s","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 5 Suspension System Billet TRD (K53235S)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 4 system with the upgrade of the 2.0 Aluminum Series rear shocks to remote reservoir versions. This system offers improved on- and off-road performance, with greater rear shock heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 2.0 remote reservoir rear shocks, dual rate rear coils, a 2.5 Series internal reservoir front coilover shock and billet front upper control arm combo is included along with a front sway bar drop kit. This Stage 5 system features the 2023-2026 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet aluminum front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 5 suspension system are V.S. 2.0 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851316748354,"sku":"K53235S","price":4203.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/125e208c3bcdf9755e787a975080a952.jpg?v=1793306072"},{"product_id":"icon-2023-2026-toyota-sequoia-trd-pro-1-2-5-lift-stage-2-2-5-suspension-system-k53392","title":"ICON 2023-2026 Toyota Sequoia TRD Pro 1-2.5\" Lift Stage 2 2.5 Suspension System (K53392)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 2 complete suspension system for the 2023-2026 Toyota Sequoia TRD Pro is specifically designed to retain the stock billet aluminum front upper control arms found on Sequoia TRD Pro while providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis system features 2.5 Series coilover shocks for the front of the truck along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear. This Stage 2 system features the 2023-2026 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers with a vehicle specific shock length to allow compatibility with the stock front upper control arms found on the Sequoia TRD Pro.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 1-2.5\" of front lift height adjustability over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible with the OE front upper control arms along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for taller rear ride heights, these coil springs yield 2\" of rear lift over stock on a Sequoia TRD Pro, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 2 suspension system are V.S. 2.0 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eTheir pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851316781122,"sku":"K53392","price":2712.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/f0c5313c0b3526939e62ad0c36785c3a.jpg?v=1793306076"},{"product_id":"icon-2023-2026-toyota-sequoia-0-2-13-lift-stage-1-suspension-system-k53231","title":"ICON 2023-2026 Toyota Sequoia 0-2.13\" Lift Stage 1 Suspension System (K53231)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 1 complete suspension system for the 2023-2026 Toyota Sequoia represents our entry level performance suspension system, providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires. This system features the innovative new 2.5 EXP series coilover shocks and sway bar drop kit for the front of the truck along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear.\u003c\/p\u003e\u003cp\u003eThis Stage 1 system features the 2023-2026 Toyota Sequoia EXP Series front shock absorbers that combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the Sequoia's factory coil spring and other components. EXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear. Rounding out the Stage 1 suspension system are V.S. 2.0 Aluminum Series rear shocks specially tailored for the 2023-2026 Sequoia.\u003c\/p\u003e\u003cp\u003eThe 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Their pairing with the ICON 2.5 EXP Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851316977730,"sku":"K53231","price":1943.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/c9d292ae1954f8b3f5137bdc704f497f.jpg?v=1793306090"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-9-suspension-system-tubular-cdcv-k53239t","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 9 Suspension System Tubular CDCV (K53239T)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 9 complete suspension system for the 2023-2026 Toyota Sequoia upgrades front and rear shock absorbers to include Compression Damping Control Valves (CDCV) for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow crawling through the rocks or mobbing across the desert at full throttle.\u003c\/p\u003e\u003cp\u003eThis system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires. To compliment the CDCV equipped 2.5 Series coilovers and rear shocks, a tubular steel front upper control arm kit is included along with a front sway bar drop kit and dual rate rear coil springs.\u003c\/p\u003e\u003cp\u003eThis Stage 9 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers equipped with CDC Valves. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\u003cp\u003eRemote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. The included ICON tubular upper control arm kit is designed to improve the overall performance of the new 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2\" of rear lift over stock on a non-TRD Sequoia or 0\" of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 9 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eThey also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851317108802,"sku":"K53239T","price":5253.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/fe326ab502ea7dc407f7fc5dd50e92ec.jpg?v=1793306097"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-25-lift-stage-1-trd-3-0-suspension-system-billet-cdcv","title":"ICON 2023-2026 Toyota Sequoia 3-4.25\" Lift Stage 1 (TRD) 3.0 Suspension System Billet CDCV","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 1 3.0 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 10 2.5 suspension system with the upgrade to 3.0 Series front coilovers. This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front and rear-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eTo compliment the 3.0 Series coilover shocks, 2.5 Aluminum Series CDCV rear remote reservoir shocks are included along with billet front upper control arms, a billet rear upper\/lower link combo, a front sway bar drop kit, adjustable rear track bar, and dual rate rear coil springs. This Stage 1 system features the 2023-2026 Toyota Sequoia VS 3.0 Series remote reservoir front coilovers equipped with CDC Valves.\u003c\/p\u003e\u003cp\u003eThese adjustable coilovers allow up to 3-4.25\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eAdditionally, ICON's Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions. The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\u003cp\u003eICON billet aluminum adjustable rear upper and lower links are made from CNC machined 6061 aluminum and anodized for corrosion resistance. These link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 1 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eThey also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Also equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851317272642,"sku":"K53251S","price":10031.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/43cd2a1bd7b8c15cbfd41cd2527b86db.jpg?v=1793306111"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-25-lift-stage-3-3-0-suspension-system-tubular-trd","title":"ICON 2023-2026 Toyota Sequoia 3-4.25\" Lift Stage 3 3.0 Suspension System Tubular TRD","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 3.0 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 12 2.5 suspension system with the upgrade to 3.0 Series CDEV front coilovers. This system offers improved on- and off-road performance, with active electronic shock damping adjustment, as well as improved alignment specs, improved rear articulation, and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis Stage 3 system features the 2023-2026 Toyota Sequoia VS 3.0 Series remote reservoir front coilovers equipped with CDE Valves. These adjustable coilovers allow up to 3-4.25\" of lift height adjustability over stock when using the ICON tubular front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock.\u003c\/p\u003e\u003cp\u003eControl the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. Additionally, ICON's Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2026 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. ICON tubular steel adjustable rear upper and lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003eThese rear link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance.\u003c\/p\u003e\u003cp\u003eDesigned for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear. The ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eThe track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links. Rounding out the Stage 3 suspension system are 2.5 Aluminum Series rear remote reservoir shocks with CDEV specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street.\u003c\/p\u003e\u003cp\u003eRemote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Their pairing with the ICON V.S. 2.5 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851317338178,"sku":"K53253TS","price":9961.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/1657d5b9571605cba73e4a9701b1f8e4.jpg?v=1793306119"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-25-lift-stage-3-3-0-suspension-system-billet-trd","title":"ICON 2023-2026 Toyota Sequoia 3-4.25\" Lift Stage 3 3.0 Suspension System Billet TRD","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 3.0 complete suspension system for the 2023-2026 Toyota Sequoia builds upon the Stage 12 2.5 suspension system with the upgrade to 3.0 Series CDEV front coilovers. This system offers improved on- and off-road performance, with active electronic shock damping adjustment, as well as improved alignment specs, improved rear articulation, and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eThis Stage 3 system features the 2023-2026 Toyota Sequoia VS 3.0 Series remote reservoir front coilovers equipped with CDE Valves. These adjustable coilovers allow up to 3-4.25\" of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock.\u003c\/p\u003e\u003cp\u003eControl the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. Additionally, ICON's Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the new 2023-2026 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. ICON billet aluminum adjustable rear upper and lower links are made from CNC machined 6061 aluminum and anodized for corrosion resistance.\u003c\/p\u003e\u003cp\u003eThese link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 3 suspension system are 2.5 Aluminum Series rear remote reservoir shocks with CDEV specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eThey also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Their pairing with the ICON V.S. 2.5 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851317502018,"sku":"K53253S","price":11717.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/f314c91cba46db1badf2c8a58d2fddc7.jpg?v=1793306129"},{"product_id":"icon-2023-2026-toyota-sequoia-3-4-5-lift-stage-12-suspension-system-billet-trd-k53242s","title":"ICON 2023-2026 Toyota Sequoia 3-4.5\" Lift Stage 12 Suspension System Billet TRD (K53242S)","description":"\u003cp\u003eThe ICON Vehicle Dynamics Stage 12 complete suspension system for the 2023-2026 Toyota Sequoia builds upon Stage 11 with the inclusion of billet rear links and track bar. This system offers improved on- and off-road performance, with active electronic shock damping adjustment, as well as improved alignment specs, improved rear articulation, and increased front-end lift height range for a proper stance and fitment of up to 35\" tires.\u003c\/p\u003e\u003cp\u003eFocus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. This Stage 12 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers equipped with CDEV. These adjustable coilovers allow up to 3-4.5\" of lift height adjustability over stock when using the ICON billet aluminum front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eICON's Vehicle-specific shock length and valving along with the larger 2.5\" shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the new 2023-2026 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components. ICON billet aluminum adjustable rear upper and lower links are made from CNC machined 6061 aluminum and anodized for corrosion resistance.\u003c\/p\u003e\u003cp\u003eThese link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for taller rear ride heights, these coil springs yield 4\" of rear lift over stock on a non-TRD Sequoia or 2\" of rear lift height on a Sequoia equipped with the TRD Off-Road package or Sequoia TRD Pro, allowing for level a stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2023-2026 Sequoia. Double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links.\u003c\/p\u003e\u003cp\u003eRounding out the Stage 12 suspension system are 2.5 Aluminum Series rear remote reservoir shocks with CDEV specially tailored for the 2023-2026 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use.\u003c\/p\u003e\u003cp\u003eThey also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Their pairing with the ICON V.S. 2.5 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45851317796930,"sku":"K53242S","price":10596.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/2928a7085dc50bd0c076addc67598abd.jpg?v=1793306149"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/collections\/rls-69-53300_xl.jpg?v=1793157462","url":"https:\/\/www.skinnypedalracing.com\/collections\/toyota-sequoia-2023-lift-kits.oembed","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}