{"title":"Toyota 4Runner 2025+ Lift Kits and Leveling Kits","description":"\u003cp\u003eLift kits for the 2025 and newer Toyota 4Runner, including ReadyLIFT 2.5 inch and 3 inch SST lift kits.\u003c\/p\u003e","products":[{"product_id":"readylift-2-5-inch-sst-lift-kit-2025-toyota-4runner-69-55250","title":"ReadyLIFT 2.5 Inch SST Lift Kit - 2025 Toyota 4Runner (69-55250)","description":"\u003cp\u003eThis ReadyLIFT SST kit lifts the 2025 Toyota 4Runner 2.5 inches in front and 1 inch in the rear, aimed at off-road use and daily driving. It adds ground clearance and tire room, with fabricated steel front strut spacers, a billet front preload spacer and a rear coil spacer. It's designed for minimal modification during installation.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFabricated steel front strut spacers\u003c\/li\u003e\n\u003cli\u003eBillet front preload spacer\u003c\/li\u003e\n\u003cli\u003eRear coil spacer for a controlled ride\u003c\/li\u003e\n\u003cli\u003eDesigned for minimal modification during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRear outer bump stop\u003c\/li\u003e\n\u003cli\u003eFront strut spacer, 7\/8 inch\u003c\/li\u003e\n\u003cli\u003eRear bump stop extension\u003c\/li\u003e\n\u003cli\u003eFront preload spacer\u003c\/li\u003e\n\u003cli\u003eRear spring spacer\u003c\/li\u003e\n\u003cli\u003eHardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits the 2025 Toyota 4Runner (the listing also gives 2025-2026)\u003c\/li\u003e\n\u003cli\u003eNot for use on TRD Pro or Trailhunter packages\u003c\/li\u003e\n\u003cli\u003eMax tire: 285\/75R17 on a 17x8 +35 wheel; 285\/65R18 on an 18x9 +1 wheel with trimming\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLIFT\u003c\/li\u003e\n\u003cli\u003ePart number: 69-55250\u003c\/li\u003e\n\u003cli\u003eFront lift: 2.5 inch\u003c\/li\u003e\n\u003cli\u003eRear lift: 1 inch\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eEstimated install time: 5 hours, plus or minus 1 hour\u003c\/li\u003e\n\u003cli\u003eShipping weight: 14 lb\u003c\/li\u003e\n\u003cli\u003ePackage size: 15 x 14 x 5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eAllow about 5 hours, plus or minus 1, not counting alignment or wheel and tire assembly.\u003c\/p\u003e","brand":"ReadyLIFT","offers":[{"title":"Default Title","offer_id":45534208327746,"sku":"69-55250","price":469.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/img_69df411dc5394_1.jpg?v=1791767518"},{"product_id":"readylift-3-inch-sst-lift-kit-2025-toyota-4runner-69-55300","title":"ReadyLIFT 3 Inch SST Lift Kit - 2025 Toyota 4Runner (69-55300)","description":"\u003cp\u003eThis ReadyLIFT SST kit lifts the 2025 Toyota 4Runner (6th generation) with factory rear coil springs 3 inches in front and 2 inches in the rear. It's a bolt-on kit with updated tubular upper control arms, billet aluminum front strut spacers, differential drop components that maintain CV angles, and rear shock extensions that keep the factory shocks.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminum front strut spacers\u003c\/li\u003e\n\u003cli\u003eUpdated tubular upper control arms with corrected ball joint pivot angles\u003c\/li\u003e\n\u003cli\u003eDifferential drop components that maintain CV angles and allow over 3 inches of down travel\u003c\/li\u003e\n\u003cli\u003ePowder-coated fabricated steel rear coil spring spacers (2 inch)\u003c\/li\u003e\n\u003cli\u003eRear shock extensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront strut spacers\u003c\/li\u003e\n\u003cli\u003eFront upper control arm assemblies, left and right\u003c\/li\u003e\n\u003cli\u003eFront preload spacers\u003c\/li\u003e\n\u003cli\u003eFront differential drop kit\u003c\/li\u003e\n\u003cli\u003eRear spring spacers, 2 inch\u003c\/li\u003e\n\u003cli\u003eRear shock extensions, left and right\u003c\/li\u003e\n\u003cli\u003eFront and rear bump stop extensions\u003c\/li\u003e\n\u003cli\u003eFalcon bump stop\u003c\/li\u003e\n\u003cli\u003eRear sway bar brackets\u003c\/li\u003e\n\u003cli\u003eRear brake line bracket\u003c\/li\u003e\n\u003cli\u003eHardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits the 2025 Toyota 4Runner with factory rear coil springs\u003c\/li\u003e\n\u003cli\u003eNot for TRD Pro or Trailhunter packages\u003c\/li\u003e\n\u003cli\u003eThe TRD skid plate will not work with this kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLIFT\u003c\/li\u003e\n\u003cli\u003ePart number: 69-55300\u003c\/li\u003e\n\u003cli\u003eFront lift: 3 inch\u003c\/li\u003e\n\u003cli\u003eRear lift: 2 inch\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eEstimated install time: 7 hours, plus or minus 1 hour\u003c\/li\u003e\n\u003cli\u003eShipping weight: 41 lb\u003c\/li\u003e\n\u003cli\u003ePackage size: 41 x 12.5 x 11.25 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eAllow about 7 hours, plus or minus 1, not counting alignment or wheel and tire assembly.\u003c\/p\u003e","brand":"ReadyLIFT","offers":[{"title":"Default Title","offer_id":45534211833922,"sku":"69-55300","price":1299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/69-55300-1_1.jpg?v=1791767521"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-2-3-0-suspension-w-cdxs-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 2 3.0 Suspension w\/CDXS Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 2 3.0 CDXS suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and compression damping adjustability in a complete suspension package to remove the limitations of stock components.\u003c\/p\u003e\u003cp\u003eThis Stage 2 system builds upon Stage 1 with rear upper and lower links and adjustable rear track bar added to the core system. The Stage 2 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDXS equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the “Bump Zone”, compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Dual Speed (CDXS) valves are included for precisely dialing in your suspension performance. CDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. ICON billet rear upper and lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDXS provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848742330434,"sku":"K53472D","price":10330.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/8ebfee6effb9f008b51a1d364e3c627a.jpg?v=1793297424"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-9-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 9 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 9 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Stage 9 also features ICON's exclusive Compression Damping Dual Speed (CDXS) valves for precisely dialing in your suspension performance.\u003c\/p\u003e\u003cp\u003eCDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness. The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir CDCV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 9 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848742789186,"sku":"K53469T","price":6718.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/58f7695b0c123a711b107efecae397b0.jpg?v=1793297425"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-14-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 14 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 14 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear. ICON tubular rear upper and lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir rear CDEV shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 14 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848742821954,"sku":"K54414T","price":8664.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/464d17beeee1d183e7e20edec79a1e8f.jpg?v=1793297426"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-4-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 4 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 4 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the 4Runner with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.0 Aluminum Series remote reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 4 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their 4Runner on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848743280706,"sku":"K53464T","price":5109.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/1bab48e6374298a8260135baf3b0255e.jpg?v=1793297426"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-2-3-0-suspension-w-cdev-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 2 3.0 Suspension w\/CDEV Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 2 3.0 CDEV suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and compression damping adjustability in a complete suspension package to remove the limitations of stock components.\u003c\/p\u003e\u003cp\u003eThis Stage 2 system builds upon Stage 1 with rear upper and lower links and adjustable rear track bar added to the core system. The Stage 2 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the “Bump Zone”, compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Electronic Valves are included for actively dialing in your suspension performance. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain.\u003c\/p\u003e\u003cp\u003eCDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON tubular rear upper and lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDEV provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848743510082,"sku":"K53472TE","price":9870.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/91c7e60c3ac105c5630810002bec6a21.jpg?v=1793297427"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-10-2-5-suspension-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 10 2.5 Suspension Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 10 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON billet rear upper and lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir CDCV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 10 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848777654338,"sku":"K54410","price":8537.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/78d1b88f77e8560c2adc6f74c21e6739.jpg?v=1793297541"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-2-3-0-suspension-w-cdev-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 2 3.0 Suspension w\/CDEV Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 2 3.0 CDEV suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and compression damping adjustability in a complete suspension package to remove the limitations of stock components.\u003c\/p\u003e\u003cp\u003eThis Stage 2 system builds upon Stage 1 with rear upper and lower links and adjustable rear track bar added to the core system. The Stage 2 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the “Bump Zone”, compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Electronic Valves are included for actively dialing in your suspension performance. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain.\u003c\/p\u003e\u003cp\u003eCDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON billet rear upper and lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDEV provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848777883714,"sku":"K53472E","price":11616.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/f84fcf936a30cfbf6fa801ea271107da.jpg?v=1793297542"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-1-3-0-suspension-w-cdcv-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 1 3.0 Suspension w\/CDCV Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 1 3.0 CDCV suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and compression damping adjustability while utilizing only the required components for full system functionality.\u003c\/p\u003e\u003cp\u003eThis allows other components such as rear upper and lower links and rear track bar to be added separately from the core system. The Stage 1 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the “Bump Zone”, compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDCV provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848777916482,"sku":"K53471TC","price":6348.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/4a300c1ab538702a5f624bf9d5668c31.jpg?v=1793297542"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-5-2-5-suspension-system-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 5 2.5 Suspension System Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 5 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 5 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848778440770,"sku":"K53465","price":4947.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/36658c8e1a05a4b48abedd2bbd1847db.jpg?v=1793297543"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-10-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 10 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 10 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON tubular rear upper and lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir CDCV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 10 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848778670146,"sku":"K54410T","price":6790.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/0f2376a41ac8eab6c5507816be4b60c3.jpg?v=1793297543"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-1-3-0-suspension-w-cdcv-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 1 3.0 Suspension w\/CDCV Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 1 3.0 CDCV suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and compression damping adjustability while utilizing only the required components for full system functionality.\u003c\/p\u003e\u003cp\u003eThis allows other components such as rear upper and lower links and rear track bar to be added separately from the core system. The Stage 1 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the “Bump Zone”, compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDCV provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848800526402,"sku":"K53471C","price":6887.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/66502796d797e17fd499f3c217c51c2a.jpg?v=1793297623"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-11-2-5-suspension-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 11 2.5 Suspension Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 11 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDXS equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Stage 11 also features ICON's exclusive Compression Damping Dual Speed (CDXS) valves for precisely dialing in your suspension performance.\u003c\/p\u003e\u003cp\u003eCDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness. The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON billet rear upper and lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir CDXS rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 11 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848800559170,"sku":"K54411","price":9105.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/72c5b8073fb264a16ae7a9f39b4d6a4f.jpg?v=1793297623"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-5-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 5 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 5 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear. ICON 2.5 Aluminum Series remote reservoir rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 5 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848800788546,"sku":"K53465T","price":4408.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/595a38eff3c8af2620bb838628a4a215.jpg?v=1793297624"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-1-2-5-suspension-system","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 1 2.5 Suspension System","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 1 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring internal reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s specifically designed coilover lengths, optimized for 4WD models, maximizes the available front wheel travel for improved suspension performance. The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevent CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while up to 1.875” of rear lift height over stock allows a for level stance front to rear on hybrid specific models.\u003c\/p\u003e\u003cp\u003eICON 2.0 Aluminum Series internal reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848801345602,"sku":"K53461","price":2470.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/07940891b517806c675a2755247073fb.jpg?v=1793297625"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-11-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 11 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 11 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Stage 11 also features ICON's exclusive Compression Damping Dual Speed (CDXS) valves for precisely dialing in your suspension performance.\u003c\/p\u003e\u003cp\u003eCDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness. The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875” of rear lift height over stock allows a for level stance front to rear. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir CDCV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 11 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848801574978,"sku":"K54411T","price":7359.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/3ba627bb48296faea8633b4230975484.jpg?v=1793297626"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-1-3-0-suspension-w-cdxs-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 1 3.0 Suspension w\/CDXS Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 1 3.0 CDXS suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and dual speed compression damping adjustability while utilizing only the required components for full system functionality.\u003c\/p\u003e\u003cp\u003eThis allows other components such as rear upper and lower links and rear track bar to be added separately from the core system. The Stage 1 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDXS equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Dual Speed (CDXS) valves are included for precisely dialing in your suspension performance. CDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDXS provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848886804546,"sku":"K53471TD","price":6740.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/95e6820616794f2ec4304d6ea513c0ba.jpg?v=1793297849"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-2-2-5-suspension-system-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 2 2.5 Suspension System Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 2 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring internal reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load.\u003c\/p\u003e\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. ICON 2.0 Aluminum Series internal reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848887033922,"sku":"K53462","price":3842.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/529bfc38ed3844187472889fc5e77b5d.jpg?v=1793297849"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-6-2-5-suspension-system-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 6 2.5 Suspension System Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 6 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 6 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848887492674,"sku":"K53466","price":5402.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/c2edf54a483df79675bb259b66bf8da0.jpg?v=1793297850"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-12-2-5-suspension-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 12 2.5 Suspension Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 12 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input.\u003c\/p\u003e\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir CDEV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 12 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848887722050,"sku":"K54412","price":7815.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/46ea37085f5e446c8b20a21daf117f99.jpg?v=1793297851"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-2-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 2 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 2 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring internal reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while max 1.875\" of rear lift height over stock allows a for level stance front to rear. ICON 2.0 Aluminum Series internal reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848888344642,"sku":"K53462T","price":3303.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/6f46b685abb5ee69bd47722e75040d05.jpg?v=1793297852"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-12-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 12 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 12 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir rear CDEV shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 12 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848925765698,"sku":"K54412T","price":7276.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/de07f857f9caa73ad824df63735c1f8a.jpg?v=1793297943"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-1-3-0-suspension-w-cdxs-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 1 3.0 Suspension w\/CDXS Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 1 3.0 CDXS suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and dual speed compression damping adjustability while utilizing only the required components for full system functionality.\u003c\/p\u003e\u003cp\u003eThis allows other components such as rear upper and lower links and rear track bar to be added separately from the core system. The Stage 1 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDXS equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Dual Speed (CDXS) valves are included for precisely dialing in your suspension performance. CDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDXS provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848925798466,"sku":"K53471D","price":7279.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/c7a2ea6cc9b1ec257037f10f22fa0c9d.jpg?v=1793297944"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-6-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 6 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 6 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 6 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848926060610,"sku":"K53466T","price":4863.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/d394d6ed831b397744799c17a62389fa.jpg?v=1793297944"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-3-2-5-suspension-system-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 3 2.5 Suspension System Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 3 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring internal reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load.\u003c\/p\u003e\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.0 Aluminum Series internal reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848926322754,"sku":"K53463","price":4296.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/fae1f6c34c8836a15c7825aa07733765.jpg?v=1793297945"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-13-2-5-suspension-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 13 2.5 Suspension Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 13 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input.\u003c\/p\u003e\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. ICON billet rear lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir CDEV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 13 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848926584898,"sku":"K54413","price":9310.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/c6f21fc9ace8dc58051eb7883af6d4b8.jpg?v=1793297945"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-1-3-0-suspension-w-cdev-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 1 3.0 Suspension w\/CDEV Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 1 3.0 CDEV suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and active, electronic compression damping adjustability while utilizing only the required components for full system functionality.\u003c\/p\u003e\u003cp\u003eThis allows other components such as rear upper and lower links and rear track bar to be added separately from the core system. The Stage 1 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Electronic Valves are included for actively dialing in your suspension performance. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain.\u003c\/p\u003e\u003cp\u003eCDEV's hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDEV provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848954830914,"sku":"K53471TE","price":8026.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/0168ef7ff537781e96a2b088d066deeb.jpg?v=1793298017"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-3-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 3 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 3 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring internal reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.0 Aluminum Series internal reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848955060290,"sku":"K53463T","price":3757.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/a8c64f28f47e714dd47e62901c0aecd2.jpg?v=1793298018"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-7-2-5-suspension-system-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 7 2.5 Suspension System Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 7 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON billet rear lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 7 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848955322434,"sku":"K53467","price":6897.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/b57fbbd11ef99a55399f4803d419711e.jpg?v=1793298018"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-13-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 13 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 13 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir rear CDEV shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 13 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848955584578,"sku":"K54413T","price":8023.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/b588246c463fdba7f71c3f759ff95268.jpg?v=1793298019"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-4-2-5-suspension-system-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 4 2.5 Suspension System Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 4 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load.\u003c\/p\u003e\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. ICON billet rear lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.0 Aluminum Series remote reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 4 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45848955846722,"sku":"K53464","price":6395.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/bb0abe062eaf8d07d952df5198c37fa8.jpg?v=1793298020"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-14-2-5-suspension-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 14 2.5 Suspension Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 14 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input.\u003c\/p\u003e\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. ICON billet rear upper and lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir CDEV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 14 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850925465666,"sku":"K54414","price":10411.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/63a1351f3e7b4ae70af9b431783f8c97.jpg?v=1793302967"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-1-3-0-suspension-w-cdev-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 1 3.0 Suspension w\/CDEV Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 1 3.0 CDEV suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and active, electronic compression damping adjustability while utilizing only the required components for full system functionality.\u003c\/p\u003e\u003cp\u003eThis allows other components such as rear upper and lower links and rear track bar to be added separately from the core system. The Stage 1 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Electronic Valves are included for actively dialing in your suspension performance. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain.\u003c\/p\u003e\u003cp\u003eCDEV's hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDEV provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850925957186,"sku":"K53471E","price":8565.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/38ef9ecb534a49017eeabffa8f22a21b.jpg?v=1793302969"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-7-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 7 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 7 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 7 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850926612546,"sku":"K53467T","price":5610.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/9a1f470f4c5c1444d084084038a2d6f3.jpg?v=1793302971"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-2-3-0-suspension-w-cdcv-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 2 3.0 Suspension w\/CDCV Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 2 3.0 CDCV suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and compression damping adjustability in a complete suspension package to remove the limitations of stock components.\u003c\/p\u003e\u003cp\u003eThis Stage 2 system builds upon Stage 1 with rear upper and lower links and adjustable rear track bar added to the core system. The Stage 2 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON tubular rear upper and lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDCV provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850927562818,"sku":"K53472TC","price":8192.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/79daab44c0a4762b9f24ac62c7e2d2eb.jpg?v=1793302973"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-8-2-5-suspension-system-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 8 2.5 Suspension System Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 8 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON billet rear lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir CDCV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 8 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850928578626,"sku":"K53468","price":7436.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/ab14308dec8706a310b641d9f091bc5c.jpg?v=1793302976"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-2-3-0-suspension-w-cdcv-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 2 3.0 Suspension w\/CDCV Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 2 3.0 CDCV suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and compression damping adjustability in a complete suspension package to remove the limitations of stock components.\u003c\/p\u003e\u003cp\u003eThis Stage 2 system builds upon Stage 1 with rear upper and lower links and adjustable rear track bar added to the core system. The Stage 2 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. ICON billet rear upper and lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDCV provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850929201218,"sku":"K53472C","price":9938.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/95e1db28aceb4ccb760da0cecceebe37.jpg?v=1793302978"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-8-2-5-suspension-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 8 2.5 Suspension Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 8 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir CDCV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 8 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850929725506,"sku":"K53468T","price":6149.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/01a03ce98952171c8c059be555e09de2.jpg?v=1793302980"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-2-25-3-lift-stage-2-3-0-suspension-w-cdxs-tubular","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 2.25-3\" Lift Stage 2 3.0 Suspension w\/CDXS Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 2 3.0 CDXS suspension system is an excellent choice for those drivers looking to enhance the capabilities of their vehicle with maximum shock damping and compression damping adjustability in a complete suspension package to remove the limitations of stock components.\u003c\/p\u003e\u003cp\u003eThis Stage 2 system builds upon Stage 1 with rear upper and lower links and adjustable rear track bar added to the core system. The Stage 2 3.0 system includes vehicle-specific tuned 3.0 Series coilover shocks featuring CDXS equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 2.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. 3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the \"Bump Zone\", compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\u003cp\u003eThe multi-stage hydraulic Bump Zone featured in these 3.0 Series coilovers exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\u003cp\u003eICON's exclusive Compression Damping Dual Speed (CDXS) valves are included for precisely dialing in your suspension performance. CDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness.\u003c\/p\u003e\u003cp\u003eThe combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance to fit the larger diameter coil springs used on 3.0 Series coilovers.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON tubular rear upper and lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 3.0 Series remote reservoir rear shocks with CDXS provide improved shock damping ability compared to 2.5 Series shocks and utilize a vehicle-specific valving that balances the performance of the 4Runner from front to rear.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850930217026,"sku":"K53472TD","price":8584.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/aeef685fd41bcb507691d3edd9f3cedc.jpg?v=1793302983"},{"product_id":"icon-2025-2026-toyota-4runner-4wd-hybrid-1-75-3-lift-stage-9-2-5-suspension-system-billet","title":"ICON 2025-2026 Toyota 4Runner 4WD Hybrid 1.75-3\" Lift Stage 9 2.5 Suspension System Billet","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 9 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDXS equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.75-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Stage 9 also features ICON's exclusive Compression Damping Dual Speed (CDXS) valves for precisely dialing in your suspension performance.\u003c\/p\u003e\u003cp\u003eCDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness. The combination of front differential drop brackets and ICON's specifically designed coilover lengths maximizes the available front suspension travel and prevents CV bind.\u003c\/p\u003e\u003cp\u003eAdditionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while 1.875\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON billet rear lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir CDXS rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 9 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850931068994,"sku":"K53469","price":8005.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/e0a89626a04f71bcacde1b7a6220c1d5.jpg?v=1793302985"},{"product_id":"icon-2025-2026-toyota-4runner-2wd-1-25-3-lift-stage-13-suspension-system-tubular","title":"ICON 2025-2026 Toyota 4Runner 2WD 1.25-3\" Lift Stage 13 Suspension System Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 13 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's specifically designed coilover lengths, optimized for 2WD models, maximizes the available front wheel travel for improved suspension performance.\u003c\/p\u003e\u003cp\u003eFocus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while .75\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir rear CDEV shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 13 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850980319298,"sku":"K53433T","price":7790.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/6c6491f33232582254de4a77eb6b0d2f_04c4c953-3597-40d0-a27d-79394a0d82a7.jpg?v=1793303241"},{"product_id":"icon-2025-2026-toyota-4runner-2wd-1-25-3-lift-stage-13-suspension-system-billet-k53433","title":"ICON 2025-2026 Toyota 4Runner 2WD 1.25-3\" Lift Stage 13 Suspension System Billet (K53433)","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 13 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's specifically designed coilover lengths, optimized for 2WD models, maximizes the available front wheel travel for improved suspension performance.\u003c\/p\u003e\u003cp\u003eFocus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while .75\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON billet rear lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir CDEV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 13 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850980810818,"sku":"K53433","price":9077.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/8aaf7b53bc2f853e75eb3c0c89ebfab6_dadb353b-5cbc-43df-97ad-7b763fa31535.jpg?v=1793303243"},{"product_id":"icon-2025-2026-toyota-4runner-2wd-1-25-3-lift-stage-12-suspension-system-billet-k53432","title":"ICON 2025-2026 Toyota 4Runner 2WD 1.25-3\" Lift Stage 12 Suspension System Billet (K53432)","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 12 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's specifically designed coilover lengths, optimized for 2WD models, maximizes the available front wheel travel for improved suspension performance.\u003c\/p\u003e\u003cp\u003eFocus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while .75\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir CDEV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 12 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850981072962,"sku":"K53432","price":7581.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/5545d46e9034162bedbc37c4b11fba3c_6b119cfe-29c3-44a8-b5ec-43b2750d67ab.jpg?v=1793303245"},{"product_id":"icon-2025-2026-toyota-4runner-2wd-1-25-3-lift-stage-10-suspension-system-tubular","title":"ICON 2025-2026 Toyota 4Runner 2WD 1.25-3\" Lift Stage 10 Suspension System Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 10 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eICON's specifically designed coilover lengths, optimized for 2WD models, maximizes the available front wheel travel for improved suspension performance. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while .75\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON tubular rear upper and lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir CDCV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 10 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850981531714,"sku":"K53430T","price":6556.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/04cff64114499858ed76e5bf7e5f7ecc_60c94de2-c167-41e8-9407-e14e94c0c199.jpg?v=1793303246"},{"product_id":"icon-2025-2026-toyota-4runner-2wd-1-25-3-lift-stage-9-suspension-system-tubular-k53429t","title":"ICON 2025-2026 Toyota 4Runner 2WD 1.25-3\" Lift Stage 9 Suspension System Tubular (K53429T)","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 9 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Stage 9 also features ICON's exclusive Compression Damping Dual Speed (CDXS) valves for precisely dialing in your suspension performance.\u003c\/p\u003e\u003cp\u003eCDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness. ICON's specifically designed coilover lengths, optimized for 2WD models, maximizes the available front wheel travel for improved suspension performance.\u003c\/p\u003e\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while .75\" of rear lift height over stock allows a for level stance front to rear. ICON tubular rear lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir CDCV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 9 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850981826626,"sku":"K53429T","price":6485.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/fdb1abe9c525580045171189421cbb52_fb46b2a1-1b85-47a7-a6fb-5195ec922333.jpg?v=1793303248"},{"product_id":"icon-2024-2026-toyota-land-cruiser-250-series-2024-2026-lexus-gx550-2025-2026-4runner-rear-billet-lower-link-kit-gold-anodizing","title":"ICON 2024-2026 Toyota Land Cruiser 250 Series\/2024-2026 Lexus GX550\/2025-2026 4Runner Rear Billet Lower Link Kit Gold Anodizing","description":"\u003cp\u003eICON's billet aluminum rear lower link arms for the 2024-2026 Toyota Land Cruiser 250 Series, 2025-2026 Toyota 4Runner, and the 2024-2026 Lexus GX550 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum and anodized for corrosion resistance, providing a major improvement over the construction of the stock units.\u003c\/p\u003e\u003cp\u003eAn all-new gold anodized finish matches ICON shock absorbers for a splash of color in the wheel well and provide a custom look to any build. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.\u003c\/p\u003e\u003cp\u003eThe quality rod ends and bushings featured in these link arms allow the vehicle's suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON's engineering team has also gone a step further in the development of these products by incorporating features such replaceable nylon rock sliders to prevent any hang-ups on the trail.\u003c\/p\u003e\u003cp\u003eAfter the design phase was completed ICON engineers put these parts through the \"ICON1K\" real-world test cycle for a final stamp of approval.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850982285378,"sku":"54003G","price":1581.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/da1a1cfa6830ad4a7e5f29b78205f2d0_91f666cc-f2b2-4e3a-822e-31ecf4e5d276.jpg?v=1793303250"},{"product_id":"icon-2025-2026-toyota-4runner-2wd-1-25-3-lift-stage-10-suspension-system-billet-k53430","title":"ICON 2025-2026 Toyota 4Runner 2WD 1.25-3\" Lift Stage 10 Suspension System Billet (K53430)","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 10 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\u003cp\u003eICON's specifically designed coilover lengths, optimized for 2WD models, maximizes the available front wheel travel for improved suspension performance. The included ICON billet aluminum upper control arm kit is designed to improve overall performance with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while .75\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON billet rear upper and lower links feature on-vehicle adjustability via the ICON double adjuster and employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir CDCV rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 10 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850982547522,"sku":"K53430","price":8303.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/56d9cabe217faa1221c7ef429f2856f7_cc7d63dc-375e-438d-8d6e-b87326e0327b.jpg?v=1793303252"},{"product_id":"icon-2025-2026-toyota-4runner-2wd-1-25-3-lift-stage-12-suspension-system-tubular","title":"ICON 2025-2026 Toyota 4Runner 2WD 1.25-3\" Lift Stage 12 Suspension System Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 12 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's specifically designed coilover lengths, optimized for 2WD models, maximizes the available front wheel travel for improved suspension performance.\u003c\/p\u003e\u003cp\u003eFocus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while .75\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar. ICON 2.5 Aluminum Series remote reservoir rear CDEV shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 12 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850983301186,"sku":"K53432T","price":7042.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/4a66b410bb462980a7a417b0a0baa464_48657a50-8aaa-4ced-a7d1-e14d865b00c7.jpg?v=1793303253"},{"product_id":"icon-2025-2026-toyota-4runner-2wd-1-25-3-lift-stage-14-suspension-system-tubular","title":"ICON 2025-2026 Toyota 4Runner 2WD 1.25-3\" Lift Stage 14 Suspension System Tubular","description":"\u003cp\u003eICON Vehicle Dynamics 2025-2026 Toyota 4Runner suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road. The Stage 14 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle \"feel\" through the range of travel.\u003c\/p\u003e\u003cp\u003eThese coilovers are height adjustable from 1.25-3\" of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's specifically designed coilover lengths, optimized for 2WD models, maximizes the available front wheel travel for improved suspension performance.\u003c\/p\u003e\u003cp\u003eFocus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. The included ICON tubular upper control arm kit is designed to improve overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance.\u003c\/p\u003e\u003cp\u003eAdditionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance while .75\" of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\u003cp\u003eICON tubular rear upper and lower links employ dual-durometer greaseless bushings at one end, and massive FK rod ends at the other to provide the best combination of free articulation while isolating and damping road noise and vibrations. The ICON Billet Adjustable Rear Track Bar helps re-center the rear axle and double adjuster rod end threads allow easy \"on-vehicle\" fine adjustment of track bar length without requiring removal or disassembly of the track bar.\u003c\/p\u003e\u003cp\u003eICON 2.5 Aluminum Series remote reservoir rear CDEV shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2025-2026 Toyota 4Runner Stage 14 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45850983759938,"sku":"K53434T","price":8430.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/626eab99cf313beaa47f1f99d53ebb76_a613d052-8778-4e05-bc4b-5da3f8438acc.jpg?v=1793303255"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/collections\/img_69df411dc5394_1.jpg?v=1793157461","url":"https:\/\/www.skinnypedalracing.com\/collections\/toyota-4runner-2025-lift-kits.oembed","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}