{"title":"Savvy TJ \/ LJ Control Arms","description":"\u003cp\u003eSavvy Offroad control arms for the 1997-2006 Jeep Wrangler TJ and LJ.\u003c\/p\u003e","products":[{"product_id":"savvy-tj-lj-johnny-joint-aluminum-upper-rear-control-arms","title":"Savvy TJ\/LJ Johnny Joint® Aluminum Upper Rear Control Arms","description":"\u003ch3\u003eUltimate Off-Road Performance\u003c\/h3\u003e\n\u003cp\u003eUpgrade your vehicle with our Savvy Upper Rear Control Arms, designed for superior flexibility and off-road performance, while also ensuring good road manners. These arms are compatible with Jeep Wrangler TJ\/LJ model years 1997-2006 and offers an impressive upgrade over competitor offerings, increasing durability, strength, and flexibility. This set outperforms all other aftermarket options. These where born from our racing hertitage using the same material and joints that we use in our Winning King of the Hamers EMC race Jeeps.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cp\u003eThis complete set includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSavvy Double Adjustable Rear Upper Control Arms pair and includes Grade 8 Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineered Construction\u003c\/h3\u003e\n\u003cp\u003eOur Control Arms is constructed with the best aluminum for less corrions easy fine tuning. The Control Arms are made with solid round bar alumium providing greater strength and robustness than our competitors. The control arms are equipped with a RockJock Johnny Joint at both ends for enhanced movement and performance.\u003c\/p\u003e\n\u003ch3\u003eEnhanced Adjustability\u003c\/h3\u003e\n\u003cp\u003eExperience the convenience of adjustability with our Double Ajustable Control Arms. They are designed to enable precise alignment correction, re-center your front axle, and accommodate lifts from 0 to 6 inches. These arms allows you to dial your suspension in perfectly and get more out of your vehicle.\u003c\/p\u003e\n\u003ch3\u003eProudly American\u003c\/h3\u003e\n\u003cp\u003eAll Savvy products are made in the USA. We source our materials locally and maintain full control over the manufacturing process, ensuring our products meet the highest quality standards.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cp\u003eOur Control Arms can be conveniently installed using factory hardware. For those dealing with rusted or stubborn bolts, we include Grade 8 hardware kits with all of our Control Arm kits. Competitors charge for Grade 8 hardware.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDouble adjustable Savvy Aluminum Control Arms\u003c\/li\u003e\n\u003cli\u003eEquipped with a RockJock Johnny Joint at both ends for insane flexibility and longevity.\u003c\/li\u003e\n\u003cli\u003eAdjustability to accommodate lifts from 0 to 6 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Savvy Control Arms?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltimate Performance\u003c\/strong\u003e: These control arms are designed for the best off-road flexibility and durability, while maintaining incredibly good road manners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered Construction\u003c\/strong\u003e: With Aluminum Control Arms, our control arms provide greater strength and performance than competitors. Lifetime Warranty on the link material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: By choosing our Control Arms, you are supporting American-made products and benefiting from our high-quality manufacturing standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn Conclusion\u003c\/h3\u003e\n\u003cp\u003eInvesting in the Savvy Off Road Control Arms is a choice for exceptional off-road flexibility, while still preserving commendable on-road behavior. This upgrade provides a harmonious balance of strength and flexibility, ensuring your vehicle is ready to conquer any terrain while maintaining a comfortable ride. Experience the outstanding performance and durability of American engineering with the Savvy Aluminum Control Arms. Make the switch today, and start reaping the benefits of a finely-tuned and reliable suspension system.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671298039874,"sku":"OGS-SAV-9103","price":430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/CE-9106SA__39602.1704780624.1280.1280__60890.1704780846.1280.1280.jpg?v=1792451361"},{"product_id":"savvy-tj-lj-johnny-joint-aluminum-lower-control-arms","title":"Savvy TJ\/LJ Johnny Joint® Aluminum Lower Control Arms","description":"\u003ch3\u003eUltimate Off-Road Performance\u003c\/h3\u003e\n\u003cp\u003eUpgrade your vehicle with our Savvy Lower Control Arms (use on front or rear,) designed for superior flexibility and off-road performance, while also ensuring good road manners. These arms are compatible with Jeep Wrangler TJ\/LJ model years 1997-2006 and offers an impressive upgrade over competitor offerings, increasing durability, strength, and flexibility. This set outperforms all other aftermarket options. These where born from our racing hertitage using the same material and joints that we use in our Winning King of the Hamers EMC cars.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cp\u003eThis complete set includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSavvy Double Adjustable Rear Lower Control Arms pair and includes Grade 8 Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineered Construction\u003c\/h3\u003e\n\u003cp\u003eOur Control Arms is constructed with the best aluminum for less corrions easy fine tuning. The Control Arms are made with solid round bar alumium providing greater strength and robustness than our competitors. The control arms are equipped with a RockJock Johnny Joint at both ends for enhanced movement and performance.\u003c\/p\u003e\n\u003ch3\u003eEnhanced Adjustability\u003c\/h3\u003e\n\u003cp\u003eExperience the convenience of adjustability with our Double Ajustable Control Arms. They are designed to enable precise alignment correction, re-center your front axle, and accommodate lifts from 0 to 6 inches. These arms allows you to dial your suspension in perfectly and get more out of your vehicle.\u003c\/p\u003e\n\u003ch3\u003eProudly American\u003c\/h3\u003e\n\u003cp\u003eAll Savvy products are made in the USA. We source our materials locally and maintain full control over the manufacturing process, ensuring our products meet the highest quality standards.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cp\u003eOur Control Arms can be conveniently installed using factory hardware. For those dealing with rusted or stubborn bolts, we include Grade 8 hardware kits with all of our Control Arm kits. Competitors charge for Grade 8 hardware.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDouble adjustable Savvy Aluminum Control Arms\u003c\/li\u003e\n\u003cli\u003eEquipped with a RockJock Johnny Joint at both ends for insane flexibility and longevity.\u003c\/li\u003e\n\u003cli\u003eAdjustability to accommodate lifts from 0 to 6 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Savvy Control Arms?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltimate Performance\u003c\/strong\u003e: These control arms are designed for the best off-road flexibility and durability, while maintaining incredibly good road manners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered Construction\u003c\/strong\u003e: With Aluminum Control Arms, our control arms provide greater strength and performance than competitors. Lifetime Warranty on the link material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: By choosing our Control Arms, you are supporting American-made products and benefiting from our high-quality manufacturing standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn Conclusion\u003c\/h3\u003e\n\u003cp\u003eInvesting in the Savvy Off Road Control Arms is a choice for exceptional off-road flexibility, while still preserving commendable on-road behavior. This upgrade provides a harmonious balance of strength and flexibility, ensuring your vehicle is ready to conquer any terrain while maintaining a comfortable ride. Experience the outstanding performance and durability of American engineering with the Savvy Aluminum Control Arms. Make the switch today, and start reaping the benefits of a finely-tuned and reliable suspension system.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671298072642,"sku":"OGS-SAV-9106","price":430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/CE-9106SA__39602.1704780624.1280.1280.jpg?v=1792451363"},{"product_id":"savvy-tj-lj-johnny-joint-aluminum-control-arm-set-8-pieces","title":"Savvy TJ\/LJ Johnny Joint® Aluminum Control Arm Set - 8 Pieces","description":"\u003ch3\u003eUltimate Off-Road Performance\u003c\/h3\u003e\n\u003cp\u003eUpgrade your vehicle with our Savvy Complete Set of Control Arms, designed for superior flexibility and off-road performance, while also ensuring good road manners. This set is compatible with Jeep Wrangler TJ\/LJ model years 1997-2006 and offers an impressive upgrade over competitor offerings, increasing durability, strength, and flexibility. This set outperforms all other aftermarket options. These where born from our racing hertitage using the same material and joints that we use in our Winning King of the Hamers EMC cars.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cp\u003eThis complete set includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSavvy Double Adjustable Front Upper Control Arms (SAV-9102) Includes all Hardware\u003c\/li\u003e\n\u003cli\u003eSavvy Double Adjustable Front Lower Control Arms (SAV-9106) Includes all Hardware\u003c\/li\u003e\n\u003cli\u003eSavvy Double Adjustable Rear Upper Control Arms (SAV-9103) Includes all Hardware\u003c\/li\u003e\n\u003cli\u003eSavvy Double Adjustable Rear Lower Control Arms (SAV-9106) Includes all Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineered Construction\u003c\/h3\u003e\n\u003cp\u003eOur Complete Set of Control Arms is constructed with the best aluminum for less corrsions easy fine tuning. The Control Arms are made with solid round bar alumium providing greater strength and robustness than our competitors. The control arms are equipped with a RockJock Johnny Joint at both ends for enhanced movement and performance. However, the Front Upper Control Arms feature a heavy duty steel fork at the axle end, which attaches to the bushing already installed on factory axles. You can upgrade the axle bushings with a CE-9102K JJ Kit\u003c\/p\u003e\n\u003ch3\u003eEnhanced Adjustability\u003c\/h3\u003e\n\u003cp\u003eExperience the convenience of adjustability with our Complete Set of Double Ajustable Control Arms. They are designed to enable precise alignment correction, re-center your front axle, and accommodate lifts from 0 to 6 inches. This set allows you to dial your suspension in perfectly and get more out of your vehicle when all 8 control arms can work in concert.\u003c\/p\u003e\n\u003ch3\u003eProudly American\u003c\/h3\u003e\n\u003cp\u003eAll Savvy products are made in the USA. We source our materials locally and maintain full control over the manufacturing process, ensuring our products meet the highest quality standards.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cp\u003eOur Complete Set of Control Arms can be conveniently installed using factory hardware. For those dealing with rusted or stubborn bolts, we include Grade 8 hardware kits with all of our Control Arm kits. Competitors charge for Grade 8 hardware.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDouble adjustable Savvy Aluminum Control Arms\u003c\/li\u003e\n\u003cli\u003eEquipped with a RockJock Johnny Joint at both ends for insane flexibility and longevity.\u003c\/li\u003e\n\u003cli\u003eAdjustability to accommodate lifts from 0 to 6 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Savvy Complete Set of Control Arms?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltimate Performance\u003c\/strong\u003e: These control arms are designed for the best off-road flexibility and durability, while maintaining incredibly good road manners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered Construction\u003c\/strong\u003e: With Aluminum Control Arms, our control arms provide greater strength and performance than competitors. Lifetime Warranty on the link material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: By choosing our Control Arms, you are supporting American-made products and benefiting from our high-quality manufacturing standards.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671298105410,"sku":"OGS-SAV-9100","price":1567.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/CE-9100SA__37301.1704780655.1280.1280.jpg?v=1792451364"},{"product_id":"savvy-control-arm-set-new-7075-aluminum-series-1996-2006-jeep-tj-lj","title":"Savvy Control Arm Set (New 7075 Aluminum Series) - 1996-2006 Jeep TJ\/LJ","description":"\u003ch4\u003e\u003cstrong\u003eSavvy Offroad 7075 Aluminum Short-Arm Control Arms | 1997–2006 Jeep Wrangler TJ \/ LJ Unlimited\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eSavvy Offroad 7075 Aluminum Short-Arm Control Arms\u003c\/strong\u003e are engineered specifically for the short-arm suspension geometry of the 1997–2006 Jeep Wrangler TJ and LJ Unlimited. Built from the same \u003cstrong\u003e7075 aluminum\u003c\/strong\u003e used in Savvy's King of the Hammers championship-winning EMC race cars nearly double the yield strength of 6061 aluminum and superior to steel in impact resistance and fatigue paired with \u003cstrong\u003eRockJock \"Narrow\" Housing Johnny Joints\u003c\/strong\u003e at the axle side and \u003cstrong\u003eRK Adventure Series joints\u003c\/strong\u003e at the frame side, double-adjustable with built-in wrench flats, and upgraded to \u003cstrong\u003e75° of misalignment\u003c\/strong\u003e from the standard 60°. The strongest, most capable short-arm control arms available for the TJ\/LJ platform. Bolt-on factory replacement. Lifetime warranty on link material. Made in the USA.\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e Savvy 7075 Aluminum Control Arms\u003c\/strong\u003e, engineered for \u003cstrong\u003emaximum strength, smoother ride quality, better articulation, and precise suspension adjustability\u003c\/strong\u003e. Built for Jeep owners who want serious off-road durability without sacrificing on-road comfort, these \u003cstrong\u003eJeep TJ\/LJ control arms\u003c\/strong\u003e are race-tested, trail-proven, and designed to perform in demanding conditions.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBorn From Racing, Not Just Trail Pics\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA lot of companies post trail pics. Not many can post finish line pics. \u003cstrong\u003eSavvy can.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen we say these control arms were born from racing, we mean it literally. Savvy has stacked more finishes, wins, and championships than any other brand in the armor game proven at the races where equipment either holds or fails in front of everyone watching:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKing of the Hammers\u003c\/strong\u003e: The most demanding off-road race on earth. The same 7075 aluminum in these control arms is the material running in the EMC championship-winning race cars. If it holds up there, it holds up everywhere you will ever wheel your TJ or LJ.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaja\u003c\/strong\u003e: High-speed desert racing where suspension components take sustained vibration, heat, and repeated impact over hundreds of miles. The race that separates real engineering from spec sheet marketing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf it holds up there, the trails we all wheel on feel easy.\u003c\/p\u003e\n\u003cp\u003eWe don't build once and walk away. We keep improving because the trails, the speeds, and the drivers keep pushing the limits. Every refinement in the Legacy line came from breaking something, analyzing why, and building the next version better. That cycle does not stop because the racing does not stop.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBuilt light. Built strong. Built with purpose. Champions run Savvy and that list is long.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cstrong\u003e7075 Aluminum, Why the Alloy Matters Even on a Short-Arm Build\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eSome builders assume that alloy selection matters more on long-arm builds because the arms are longer and the loads are higher. The reality is different. On a short-arm TJ or LJ running 35–40 inch tires on rocky terrain, the lower control arms take concentrated impact loads from rock contact that are independent of arm length. A 6061 arm and a 7075 arm at the same length and diameter respond differently to that impact loading and the difference is nearly double the yield strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7075 aluminum\u003c\/strong\u003e: yield strength approximately 73,000 psi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6061 aluminum\u003c\/strong\u003e: yield strength approximately 40,000 psi. Nearly half of 7075.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMild steel (A36)\u003c\/strong\u003e: yield strength approximately 36,000 psi. Less than half of 7075.\u003c\/p\u003e\n\u003cp\u003eOn a short-arm TJ running 37s on rocky trail, the lower control arm that makes rock contact is the one that needs 7075 strength regardless of whether the system is short-arm or long-arm. The alloy argument does not change with arm length. The load environment does not care whether the geometry is short or long. 7075 is the right material for control arms that take hits, period.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eThe Joint Selection, Two Different Joints for Two Different Load Environments\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Savvy 7075 short-arm TJ\/LJ control arms use different joint types at the axle side and frame side of each arm the same deliberate engineering choice made across the entire Savvy 7075 control arm line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRockJock \"Narrow\" Housing Johnny Joint, Axle Side\u003c\/strong\u003e: Maximum articulation capacity for the position that cycles constantly through full suspension travel. Smooth steel ball in proprietary urethane housing. Quiet, shock-dampening articulation without deflection. Upgraded to 75° misalignment from the standard 60° 15 more degrees of articulation capacity that matters on a short-arm TJ as much as on any other configuration. The 1.25\" shank on the lower arms provides maximum strength at the joint-to-arm connection point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRK Adventure Series Joint, Frame Side\u003c\/strong\u003e: NVH management for the frame-side position. Reduces noise, vibration, and harshness transmission into the frame and cabin. On a TJ or LJ used for daily driving alongside trail use which describes the majority of short-arm builds the frame-side joint's contribution to on-road comfort matters as much as the axle-side joint's contribution to articulation. The correct joint for the position.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort-Arm Geometry, Configurations\u003c\/strong\u003e: Arm length and geometry optimized for short-arm TJ\/LJ suspension setups. Pairs directly with the Savvy short-arm lift kit system and Rock Krawler Triple-rate coil springs. Correct geometry for the short-arm lift range without the conversion complexity of a long-arm system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 Aluminum, Nearly Double the Yield Strength of 6061\u003c\/strong\u003e: 73,000 psi yield strength versus 6061 at 40,000 psi and mild steel at 36,000 psi. The alloy argument does not change with arm length 7075 is the correct material for control arms that take rock contact under load. Same material used in Savvy's KOH championship EMC race car suspension. 1.75\" solid round bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStronger Than Steel at Less Weight\u003c\/strong\u003e: 7075 aluminum outperforms mild steel in yield strength and fatigue resistance while weighing significantly less. Genuinely both stronger and lighter than the steel DOM tube short-arm alternatives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRockJock \"Narrow\" Housing Johnny Joint, Axle Side\u003c\/strong\u003e: Maximum articulation, smooth urethane housing, quiet operation, upgraded to 75° misalignment. 1.25\" shank on lower arms for maximum connection strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRK Adventure Series Joint, Frame Side: \u003c\/strong\u003eNVH reduction and improved ride quality. The correct joint for the frame-side load environment on a TJ or LJ used for both trail and daily driving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75° Maximum Misalignment, Up from 60°\u003c\/strong\u003e: 15 additional degrees of articulation across all joint assemblies on a short-arm build that still demands full suspension travel capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Adjustable, Left\/Right Hand Threads with Wrench Flats\u003c\/strong\u003e: Correct pinion angle and caster for your specific lift height from inside the vehicle. Particularly important in the 2–5\" lift range where precise geometry correction makes a measurable difference in handling and driveshaft vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Control Arms, 1.25\" Shank Joint \u0026amp; 1.75\" Round Bar\u003c\/strong\u003e: Sized for the loads the lower arm position sees on a TJ or LJ running serious tires on rocky terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Control Arms, Steel Fork Axle End\u003c\/strong\u003e: Heavy-duty steel fork at the axle end integrates with the factory-installed bushing for a seamless factory- quality fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Factory Replacement\u003c\/strong\u003e: Direct replacement using factory mounting points. No cutting, no welding, no frame or axle modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty on Link Material\u003c\/strong\u003e: Savvy's lifetime warranty on the 7075 aluminum tube. The confidence that comes from knowing the alloy is correct for the application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: Precision-engineered and manufactured in America.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 1997–2006 Jeep Wrangler TJ (all years) and 2004–2006 Jeep Wrangler LJ Unlimited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Short-arm optimized for 2–5\" lift height range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 7075 aluminum solid round bar, 1.75\" diameter (lower arms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Side Joint:\u003c\/strong\u003e RockJock \"Narrow\" Housing Johnny Joint 1.25\" shank (lower), upgraded to 75° misalignment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Side Joint:\u003c\/strong\u003e RK Adventure Series joint NVH reduction and improved ride quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Arm Axle End:\u003c\/strong\u003e Heavy-duty steel fork integrating with factory-installed bushing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMisalignment:\u003c\/strong\u003e 75° (upgraded from standard 60°)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustability:\u003c\/strong\u003e Double adjustable left\/right hand threads with built-in wrench flats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Compatibility:\u003c\/strong\u003e 0–5\" short-arm lift range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Direct bolt-on using factory mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty on link material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Pairing:\u003c\/strong\u003e Designed for Savvy TJ\/LJ short-arm lift kits and Rock Krawler Triple-rate coil springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1997–2006 Jeep TJ and LJ Unlimited owners running short-arm suspension at 2–5 inches of lift who want the strongest aluminum control arms available for that configuration\u003c\/li\u003e\n\u003cli\u003eTJ and LJ owners replacing worn factory or early- aftermarket short-arm control arms with a 7075 aluminum upgrade that will outlast the platform\u003c\/li\u003e\n\u003cli\u003eDaily-driven TJs and LJs who wheel on weekends and need the RK Adventure Series frame joint's NVH reduction for highway comfort\u003c\/li\u003e\n\u003cli\u003eBuilders who understand why 7075 is the correct alloy for control arms under impact loading regardless of whether the geometry is short-arm or long-arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose Savvy 7075 Aluminum Control Arms?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep TJ\/LJ control arms\u003c\/strong\u003e force you to choose between strength, ride quality, or adjustability. The \u003cstrong\u003eSavvy 7075 aluminum control arms\u003c\/strong\u003e are designed to combine all three. You get \u003cstrong\u003eserious material strength, easy on-vehicle adjustment, improved articulation, and better ride refinement\u003c\/strong\u003e in one suspension upgrade.\u003c\/p\u003e\n\u003cp\u003eFor Jeep owners looking for \u003cstrong\u003eJeep TJ adjustable control arms\u003c\/strong\u003e, \u003cstrong\u003eJeep LJ suspension links\u003c\/strong\u003e, or a \u003cstrong\u003ehigh-performance aluminum control arm upgrade\u003c\/strong\u003e, this setup delivers a strong combination of \u003cstrong\u003erace-proven durability, suspension tuning flexibility, high-misalignment capability, and daily-drivable comfort\u003c\/strong\u003e. It is an ideal upgrade for lifted trail rigs, rock crawlers, overland Jeeps, and well-built street-and-trail TJ\/LJ builds.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhy 7075 aluminum on a short-arm build?\u003c\/strong\u003e\u003cbr\u003eBecause the alloy argument does not change with arm length. On a TJ or LJ running 35–40 inch tires on rocky terrain, the lower control arms take concentrated impact loads from rock contact regardless of whether the system is short-arm or long-arm. 7075 at approximately 73,000 psi yield strength handles those impacts 6061 at approximately 40,000 psi and mild steel at approximately 36,000 psi handle them less well. The correct material for control arms that take hits is 7075, period.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit both the TJ and the LJ Unlimited?\u003c\/strong\u003e\u003cbr\u003eYes. The SD0116 short-arm control arms fit all 1997–2006 Jeep Wrangler TJ models and the 2004–2006 Jeep Wrangler LJ Unlimited.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are there two different joint types?\u003c\/strong\u003e\u003cbr\u003eThe axle side needs maximum articulation capacity that is the RockJock Narrow Housing Johnny Joint. The frame side needs NVH management alongside durability that is the RK Adventure Series joint. Using the same joint at both ends would trade unnecessary cabin noise for articulation the frame side does not need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eLifetime warranty on the link material the 7075 aluminum tube itself. Grade 8 hardware is included in the kit at no additional charge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these a direct bolt-on replacement?\u003c\/strong\u003e\u003cbr\u003eYes. Direct bolt-on using factory mounting points on both the frame and axle. No cutting, no welding, no modifications required for short-arm installation.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671305674818,"sku":"SD0116","price":1960.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Jeep_TJ_LJ_control_arms.png?v=1792451788"},{"product_id":"savvy-tj-lj-johnny-joint-aluminum-upper-front-control-arms","title":"Savvy TJ\/LJ Johnny Joint® Aluminum Upper Front Control Arms","description":"\u003ch3\u003eUltimate Off-Road Performance\u003c\/h3\u003e\n\u003cp\u003eUpgrade your vehicle with our Savvy Upper Front Control Arms, designed for superior flexibility and off-road performance, while also ensuring good road manners. These arms are compatible with Jeep Wrangler TJ\/LJ model years 1997-2006 and offers an impressive upgrade over competitor offerings, increasing durability, strength, and flexibility. This set outperforms all other aftermarket options. These where born from our racing hertitage using the same material and joints that we use in our Winning King of the Hamers EMC race Jeeps.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cp\u003eThis complete set includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSavvy Double Adjustable Front Upper Control Arms pair and includes Grade 8 Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineered Construction\u003c\/h3\u003e\n\u003cp\u003eOur Control Arms is constructed with the best aluminum for less corrions easy fine tuning. The Control Arms are made with solid round bar alumium providing greater strength and robustness than our competitors. The control arms are equipped with a RockJock Johnny Joint at both ends for enhanced movement and performance.\u003c\/p\u003e\n\u003ch3\u003eEnhanced Adjustability\u003c\/h3\u003e\n\u003cp\u003eExperience the convenience of adjustability with our Double Ajustable Control Arms. They are designed to enable precise alignment correction, re-center your front axle, and accommodate lifts from 0 to 6 inches. These arms allows you to dial your suspension in perfectly and get more out of your vehicle.\u003c\/p\u003e\n\u003ch3\u003eProudly American\u003c\/h3\u003e\n\u003cp\u003eAll Savvy products are made in the USA. We source our materials locally and maintain full control over the manufacturing process, ensuring our products meet the highest quality standards.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cp\u003eOur Control Arms can be conveniently installed using factory hardware. For those dealing with rusted or stubborn bolts, we include Grade 8 hardware kits with all of our Control Arm kits. Competitors charge for Grade 8 hardware.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDouble adjustable Savvy Aluminum Control Arms\u003c\/li\u003e\n\u003cli\u003eEquipped with a RockJock Johnny Joint at heavy duty fork at the axle side for insane flexibility and longevity.\u003c\/li\u003e\n\u003cli\u003eAdjustability to accommodate lifts from 0 to 6 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Savvy Control Arms?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltimate Performance\u003c\/strong\u003e: These control arms are designed for the best off-road flexibility and durability, while maintaining incredibly good road manners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered Construction\u003c\/strong\u003e: With Aluminum Control Arms, our control arms provide greater strength and performance than competitors. Lifetime Warranty on the link material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: By choosing our Control Arms, you are supporting American-made products and benefiting from our high-quality manufacturing standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn Conclusion\u003c\/h3\u003e\n\u003cp\u003eInvesting in the Savvy Off Road Control Arms is a choice for exceptional off-road flexibility, while still preserving commendable on-road behavior. This upgrade provides a harmonious balance of strength and flexibility, ensuring your vehicle is ready to conquer any terrain while maintaining a comfortable ride. Experience the outstanding performance and durability of American engineering with the Savvy Aluminum Control Arms. Make the switch today, and start reaping the benefits of a finely-tuned and reliable suspension system.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671306362946,"sku":"OGS-SAV-9102","price":430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/CE-9102__47127.1704781833.1280.1280.jpg?v=1792451834"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/collections\/Jeep_TJ_LJ_control_arms.png?v=1792454873","url":"https:\/\/www.skinnypedalracing.com\/collections\/savvy-tj-lj-control-arms.oembed","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}