{"title":"Savvy JT Rocker and Corner Armor","description":"\u003cp\u003eSavvy Offroad rocker and corner armor for the 2020-2026 Jeep Gladiator JT.\u003c\/p\u003e","products":[{"product_id":"savvy-krawler-lite-front-bumper-hardcore-corners-steel-2007-2026-jeep-jk-jl-jt","title":"Savvy Krawler Lite Front Bumper Hardcore Corners (Steel) - 2007-2026 Jeep JK\/JL\/JT","description":"\u003ch4\u003e\n\u003cstrong\u003eSavvy Offroad Krawler Lite Hardcore Corners | Steel | JK \/ JKU \/ JL \/ JLU \/ JT \u003c\/strong\u003e\u003cstrong\u003e2007–2026 Jeep Wrangler and Gladiator\u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The Hard Core Corners are designed exclusively for the Savvy Krawler Lite Front Bumper for JK, JKU, JL, JLU, and JT Gladiator applications. They will not fit any other manufacturer’s bumper. Installation requires drilling holes into the Krawler Lite bumper skin and bolting the corners on.\u003c\/p\u003e\n\u003cp\u003eThe Savvy Offroad Krawler Lite Hard Core Corners are built for Jeep owners who use their bumper the way it was meant to be used. When you are dragging the front corners across rock ledges, sliding through rock gardens, dropping into waterfalls, or making hard approach contact, the corners of the bumper take the abuse first.\u003c\/p\u003e\n\u003cp\u003eThese steel Hard Core Corners add serious bash-plate protection to the most vulnerable contact points of the Krawler Lite front bumper. They help protect the bumper skin from concentrated rock impact, gouging, and deformation while letting you keep the clearance, fitment, and race-proven design of the Krawler Lite system.\u003c\/p\u003e\n\u003cp\u003eIf you wheel hard enough that bumper contact is expected, not accidental, these are the corners you want.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003e\n\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003eBorn From Racing, Not Just Trail Pics\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA lot of companies post trail pics. Not many can post finish line pics. Savvy can.\u003c\/p\u003e\n\u003cp\u003eWhen we say this system was born from racing, we mean it literally. Savvy armor has been proven in the kind of terrain where parts either survive or fail in front of everyone watching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKing of the Hammers\u003c\/strong\u003e pushes armor through brutal rock trails, high-speed desert sections, hard impacts, and terrain that exposes weak design fast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBaja\u003c\/strong\u003e adds vibration, heat, speed, and repeated abuse over hundreds of miles.\u003c\/p\u003e\n\u003cp\u003eIf it holds up there, the trails most people wheel on feel easy.\u003c\/p\u003e\n\u003cp\u003eSavvy does not build once and walk away. Every part of the Krawler Lite system comes from years of real-world abuse, racing, testing, breaking, improving, and refining. The Hard Core Corners follow that same mindset: the right protection in the right place for the way serious Jeeps get used.\u003c\/p\u003e\n\u003cp\u003eBuilt light where it matters. Built strong where it hits. Champions run Savvy.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Steel Corners on the Krawler Lite Bumper?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe corner of a front bumper is one of the highest-abuse areas on a Jeep. It is often the first point to hit when dropping into a ledge, sliding across a rock face, or squeezing through a tight obstacle.\u003c\/p\u003e\n\u003cp\u003eThat kind of impact is different from general bumper contact. It is concentrated into a small area, creating a point load directly on the corner. Over time, repeated hits can dent, gouge, or damage the bumper skin.\u003c\/p\u003e\n\u003cp\u003eThe Krawler Lite Hard Core Corners add a steel impact surface exactly where the bumper is most likely to take direct abuse. They work like a skid plate and bash plate for the outer corners, helping the bumper slide over rock contact instead of taking the full impact directly into the skin.\u003c\/p\u003e\n\u003cp\u003eIt is simple: steel where the rocks hit first.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Construction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt from steel for serious direct-impact protection at the bumper corners. Steel is ideal for this application because it handles concentrated rock contact, dragging, scraping, and repeated trail abuse extremely well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBash Plate and Skid Plate Function\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to take direct rock contact at the corners of the bumper. When the bumper slides across a ledge or hits a rock face, the Hard Core Corners help spread and deflect the impact instead of letting the bumper skin take the full hit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtects Your Krawler Lite Bumper Skin\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Krawler Lite bumper skin is built to work hard, but the corners see some of the harshest abuse on the trail. These corners help protect the area most likely to get gouged, dented, or damaged from repeated rock contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned Exclusively for the Savvy Krawler Lite Front Bumper\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese are precision-fit for the Savvy Krawler Lite Front Bumper system. They are not universal parts and will not fit other manufacturers’ bumpers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrill and Bolt-On Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation requires drilling into the Krawler Lite bumper skin and bolting the corners in place. Once installed, they provide a secure connection built for repeated trail contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Across JK, JL, and JT Platforms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for Savvy Krawler Lite front bumper applications across Jeep Wrangler JK \/ JKU, Jeep Wrangler JL \/ JLU, and Jeep Gladiator JT platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered and manufactured in America to the same standard as the rest of the Savvy Offroad armor lineup.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e 1018 Steel\u003cbr\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Savvy Krawler Lite Front Bumper only\u003cbr\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2007–2018 Jeep Wrangler JK \/ JKU\u003c\/li\u003e\n\u003cli\u003e2018–2026 Jeep Wrangler JL \/ JLU\u003c\/li\u003e\n\u003cli\u003e2020–2026 Jeep Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Drill and bolt-on installation to Krawler Lite bumper skin\u003cbr\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Steel bash plate and skid plate protection for front bumper corners\u003cbr\u003e\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Made in the USA\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWho Needs Krawler Lite Hard Core Corners?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese are for Jeep owners who wheel hard enough that bumper contact is part of the plan.\u003c\/p\u003e\n\u003cp\u003eYou need Hard Core Corners if your Jeep regularly makes hard bumper contact with rocks, ledges, waterfalls, or tight technical obstacles. If you use the front bumper to slide, pivot, drag, or push through terrain, the corners are going to take abuse.\u003c\/p\u003e\n\u003cp\u003eThese are ideal for Moab, rock gardens, technical crawling, and hard trail builds where bumper damage is not a question of if, but when.\u003c\/p\u003e\n\u003cp\u003eEven if your Jeep only sees mild trail use, dirt roads, or occasional light contact, the Hard Core Corners are still a great upgrade. They can be used as a functional accessory to add style, contrast, and a custom look to your build. Paint them, powder coat them, or color match them to your Jeep to tie the bumper into the rest of your armor package while still adding extra protection where the bumper corners take the most abuse.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSavvy Krawler Lite front bumper owners who wheel hard\u003c\/li\u003e\n\u003cli\u003eJK, JKU, JL, JLU, and JT builds that see real rock contact\u003c\/li\u003e\n\u003cli\u003eMoab, KOH-style terrain, waterfalls, ledges, and rock gardens\u003c\/li\u003e\n\u003cli\u003eJeep owners who want added corner protection without changing bumper systems\u003c\/li\u003e\n\u003cli\u003eCrawlers, trail rigs, and race-inspired builds\u003c\/li\u003e\n\u003cli\u003eAnyone who has already damaged or scraped the outer corners of their bumper skin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose Savvy Krawler Lite Hard Core Corners?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Savvy Krawler Lite bumper is built for clearance, strength, and real trail performance. The Hard Core Corners take that system one step further by adding steel protection exactly where the bumper takes the hardest direct hits.\u003c\/p\u003e\n\u003cp\u003eFor Jeep owners searching for Jeep bumper corner armor, Krawler Lite bumper protection, steel bumper corner guards, or a front bumper bash plate upgrade, these corners are a purpose-built solution for serious trail abuse.\u003c\/p\u003e\n\u003cp\u003eThey are not universal. They are built to protect the corner of the bumper when the trail gets ugly.\u003c\/p\u003e\n\u003cp\u003eBuilt to bash. Engineered to survive. Born from racing. Built for beating on the trail.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit any bumper other than the Savvy Krawler Lite?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Hard Core Corners are designed specifically for the Savvy Krawler Lite Front Bumper. They will not fit other manufacturers’ bumpers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes installation require drilling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Installation requires drilling into the Krawler Lite bumper skin and bolting the corners on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these fit JK, JL, and JT applications?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. They are designed for Krawler Lite front bumper applications across JK \/ JKU, JL \/ JLU, and JT Gladiator platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy steel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSteel is the right material for the direct-contact area of the bumper because it handles rock impact, scraping, sliding, and concentrated abuse extremely well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these mainly for looks or protection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth! These are functional steel bash corners designed for Jeeps that make real bumper contact on the trail. They can be used as a functional accessory to add style, contrast, and a custom look to your build. Paint them, powder coat them, or color match them to your Jeep to tie the bumper into the rest of your armor package while still adding extra protection where the bumper corners take the most abuse.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need these if I already have a hoop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, if you want corner protection. The hoop protects the upper bumper area, grille, winch, and front-end components. The Hard Core Corners protect the lower outer bumper corners where rock contact happens on approach. They serve different purposes.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671297876034,"sku":"SD0166","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/SAVVY_FRONT_KRAWLER_LITE_HARDCORE_CORNERS.png?v=1792451344"},{"product_id":"savvy-rocker-armor-trim-kit-lightweight-aluminum-2020-2026-jeep-jt","title":"Savvy Rocker Armor Trim Kit (Lightweight Aluminum) - 2020-2026 Jeep JT","description":"\u003ch2\u003e\u003cstrong\u003eSavvy Offroad Aluminum Rocker Trim Kit | 2020–2026 Jeep Gladiator JT\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eUpgrade your \u003cstrong\u003e2020-2026 Jeep Gladiator JT\u003c\/strong\u003e with the \u003cstrong\u003eSavvy Offroad Aluminum Rocker Trim Kit\u003c\/strong\u003e, engineered for \u003cstrong\u003elightweight rocker protection, clean body lines, and trail-ready durability\u003c\/strong\u003e. Built for Gladiator owners who want added protection without the bulk of heavier armor, this \u003cstrong\u003eJeep JT rocker trim kit\u003c\/strong\u003e helps shield vulnerable rocker areas from rocks, debris, and trail damage while maintaining a sleek, high-clearance look.\u003c\/p\u003e\n\u003cp\u003eConstructed from \u003cstrong\u003e1\/8-inch 6061 aluminum\u003c\/strong\u003e, this \u003cstrong\u003eJeep Gladiator JT rocker armor trim kit\u003c\/strong\u003e offers strong, corrosion-resistant protection without the unnecessary weight of traditional steel rocker armor. The precision-cut design follows the body closely for a clean, refined appearance that complements both daily-driven and off-road-built Gladiators.\u003c\/p\u003e\n\u003cp\u003eWhat makes the \u003cstrong\u003eSavvy JT rocker trim kit\u003c\/strong\u003e especially versatile is its \u003cstrong\u003etwo installation options\u003c\/strong\u003e. Gladiator owners can choose a \u003cstrong\u003etape-on installation\u003c\/strong\u003e using automotive-grade \u003cstrong\u003e3M adhesive tape\u003c\/strong\u003e for a quick, non-invasive install, or choose the \u003cstrong\u003ebolt-on installation\u003c\/strong\u003e for added long-term strength. For bolt-on installs, Savvy laser etches drill locations directly onto the trim for clean, accurate placement.\u003c\/p\u003e\n\u003cp\u003eWhether your Gladiator is a trail rig, weekend wheeler, or daily driver that still sees dirt, this \u003cstrong\u003eJeep JT rocker protection kit\u003c\/strong\u003e delivers the right balance of \u003cstrong\u003elightweight durability, corrosion resistance, and clean styling\u003c\/strong\u003e in one simple upgrade.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTwo Installation Methods, One Kit\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMost rocker trim kits for the Gladiator JT force a choice at purchase tape-on or bolt-on and provide no precision guidance for the bolt-on method. The Savvy JT rocker trim kit solves both problems in one product. Bolt on hardware not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTape-On Installation\u003c\/strong\u003e: Automotive-grade 3M adhesive tape provides a clean, non-invasive install with no drilling, no holes in the Gladiator body, and no permanent modification. The preferred method for daily-driven JTs where a clean, factory-integrated look matters alongside the trail protection. Quick to install, clean in appearance, and fully reversible if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Installation\u003c\/strong\u003e: For maximum mechanical strength on builds that see serious trail use. \u003cstrong\u003eDrill hole locations are laser-etched directly into the aluminum trim panel\u003c\/strong\u003e no measuring, no center punch, no guesswork. Drill exactly where the panel tells you and the bolt pattern is perfect every time. This precision manufacturing detail does not exist on any competing JT rocker trim product.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-Built for the Jeep Gladiator JT\u003c\/strong\u003e: Engineered using updated Jeep Gladiator JT CAD data for the JT's specific rocker panel dimensions and profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Installation Method, Tape-On or Bolt-On\u003c\/strong\u003e: Automotive-grade 3M tape for clean non-invasive installation, or bolt-on using laser-etched drill hole locations for maximum strength. Both options included in one kit. Choose the method that fits your build and your use case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser-Etched Drill Hole Locations\u003c\/strong\u003e: For bolt-on installation, exact drill hole positions are laser-etched directly into the aluminum trim surface. Drill where the panel shows you no measuring tape, no marking, no misaligned holes. Precision placement every time. This level of manufacturing detail does not exist on competing JT rocker trim options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8\" 6061 CNC-Machined Aluminum\u003c\/strong\u003e: 6061 aluminum is the same structural alloy used in Savvy's Legacy bumper line. At 1\/8\" thickness, the panels deflect rocks and debris without adding meaningful weight to the Gladiator's rocker panel area. Stronger per pound than steel, naturally corrosion-resistant, and machined to exact JT dimensions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust \u0026amp; Corrosion Resistant\u003c\/strong\u003e: 6061 aluminum does not rust. No paint required for corrosion protection raw aluminum forms a natural oxide layer that holds up in mud, water, and trail conditions that compromise steel panels over time. Particularly relevant for Gladiators used near coastal environments or in wet climates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision CNC Fitment, Gladiator JT Specific\u003c\/strong\u003e: Each trim piece is machined to follow the exact contour of the 2020–2026 Gladiator JT rocker panel. Seamless, flush fit that maintains the JT's body lines rather than sitting proud of the body surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips Raw Aluminum\u003c\/strong\u003e: Powder coat or paint to match your Gladiator's build color. Raw 6061 aluminum can be left unfinished it will not rust in raw condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: CNC-machined and precision-engineered in America for exact Jeep Gladiator JT fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020–2026 Jeep Gladiator JT (all trim levels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 1\/8\" 6061 CNC-machined aluminum, rust-proof and corrosion-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tape-on (automotive-grade 3M adhesive) or bolt-on (laser-etched drill locations) both options included, Bolt on hardware not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum, ready for powder coat, paint, or leave raw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC-machined in the USA using updated Jeep Gladiator JT CAD data\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eRocker Trim on a Gladiator JT, Why It Matters More Than on a Wrangler\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Jeep Gladiator JT has a longer wheelbase and longer rocker panel than the Wrangler JLU. On the trail, that longer rocker panel has more surface area exposed to rocks, ledges, and debris and on a truck-length platform, the middle section of the rocker panel is frequently the first body panel to make contact with obstacles on technical terrain.\u003c\/p\u003e\n\u003cp\u003eThe Gladiator is also used differently than the Wrangler by many owners it combines serious trail capability with real truck duty, which means it accumulates rocker panel wear from both trail use and daily work use simultaneously. Rocker trim that protects the panel surface from chips, abrasion, and low-level rock contact keeps the Gladiator looking and performing the way it should across both use cases.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eRocker Trim vs. Rock Sliders on the Gladiator JT\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRocker trim and rock sliders are not the same thing and are not interchangeable they protect against different types of damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRock sliders\u003c\/strong\u003e are structural frame-mounted armor designed to take direct hits from rocks, ledges, and obstacles. They slide across obstacles and absorb impacts that would otherwise damage the rocker panel or body tub. If your Gladiator makes hard contact with rocks on technical terrain, sliders are the protection you need for that scenario.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRocker trim\u003c\/strong\u003e protects the panel surface itself from rocks that hit the panel without the slider catching them first, from trail debris and road chips, and from the constant low-level abrasion that accumulates on a daily-driven truck used on trails. It keeps the paint and bare metal of the rocker panel intact and prevents the surface corrosion that starts from paint chips over time.\u003c\/p\u003e\n\u003cp\u003eOn a Gladiator that gets wheeled seriously and driven daily, both belong on the build. The Savvy Krawler Lite rock sliders handle the structural impacts. The rocker trim handles the surface protection between the slider edge and the body. See the \u003cstrong\u003eSavvy Krawler Lite Rock Sliders for the Jeep Gladiator JT\u003c\/strong\u003e for the structural side of that pairing.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2020–2026 Jeep Gladiator JT owners who want lightweight aluminum rocker panel protection purpose-built for the JT's longer truck-body rocker dimensions\u003c\/li\u003e\n\u003cli\u003eDaily-driven Gladiators where the tape-on method keeps the install clean and non-invasive\u003c\/li\u003e\n\u003cli\u003eTrail rigs where bolt-on installation provides maximum adhesion strength for serious use\u003c\/li\u003e\n\u003cli\u003eBuilds pairing rocker trim with Krawler Lite rock sliders for complete JT rocker panel protection\u003c\/li\u003e\n\u003cli\u003eGladiator owners who want the surface protection of steel rocker guards without the rust, the weight, or the permanent commitment\u003c\/li\u003e\n\u003cli\u003eCoastal and wet-environment builds where aluminum's natural corrosion resistance matters over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose the Savvy JT Rocker Trim Kit?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep JT rocker guards\u003c\/strong\u003e add weight, bulk, or a more industrial look than some Gladiator owners want. The \u003cstrong\u003eSavvy rocker trim kit\u003c\/strong\u003e is designed for drivers who want \u003cstrong\u003ereal rocker protection with a cleaner, lighter, more refined appearance\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eFor Gladiator owners searching for \u003cstrong\u003eJeep JT rocker armor\u003c\/strong\u003e, \u003cstrong\u003eJeep Gladiator rocker trim\u003c\/strong\u003e, or a \u003cstrong\u003elightweight aluminum rocker protection kit\u003c\/strong\u003e, this setup offers a strong combination of \u003cstrong\u003e6061 aluminum durability, rust resistance, high-clearance styling, and flexible installation options\u003c\/strong\u003e. It is an ideal upgrade for off-roaders, trail riders, and Gladiator owners who want functional protection that still looks clean on the street.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs this purpose-built for the Gladiator JT kit?\u003c\/strong\u003e\u003cbr\u003ePurpose-built for the Jeep Gladiator JT using updated Jeep Gladiator CAD data. The Gladiator JT has a longer rocker panel than the Wrangler JLU this kit was designed specifically for the JT's dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich installation method is stronger, tape-on or bolt-on?\u003c\/strong\u003e\u003cbr\u003eBolt-on using the laser-etched drill locations provides maximum mechanical strength and is recommended for builds that see regular technical trail use. Tape-on using automotive-grade 3M adhesive is appropriate for daily-driven Gladiators and moderate trail use. Both methods are included in one kit. Bolt on hardware not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the laser-etched drill holes?\u003c\/strong\u003e\u003cbr\u003eFor bolt-on installation, exact drill hole locations are laser-etched directly into the surface of the aluminum trim panel. Drill where the etching shows you, no measuring, no marking, no misaligned holes. Exact placement every time without the guesswork that causes installation errors on other products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it rust?\u003c\/strong\u003e\u003cbr\u003eNo. 6061 aluminum does not rust. Raw aluminum can be left unfinished, 6061 forms a natural oxide layer that protects against moisture and oxidation. Powder coat or paint if you want a color match to your Gladiator's build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need rock sliders if I have rocker trim?\u003c\/strong\u003e\u003cbr\u003eThey serve different purposes. Rocker trim protects the panel surface from chips, abrasion, and light debris. Rock sliders are structural mounted armor for direct obstacle contact. For the most complete rocker protection on a Gladiator that gets wheeled seriously, both together cover what neither one covers alone. See the Savvy Krawler Lite Rock Sliders for the Gladiator JT for the structural solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit all Gladiator JT trim levels?\u003c\/strong\u003e\u003cbr\u003eYes. The Savvy aluminum rocker trim kit fits the 2020–2026 Jeep Gladiator JT across all trim levels including Sport, Overland, Rubicon, Mojave, and High Altitude.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003cbr\u003eRaw aluminum. Powder coat or paint to match your build, or leave natural 6061 aluminum holds up in raw finish without rusting.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671300005954,"sku":"SD0047","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Aluminum_rocker_trim_kit_for_the_2020_2026_Jeep_Gladiator_JT.png?v=1792451532"},{"product_id":"savvy-legacy-front-bumper-hard-core-corners-stainless-steel-2007-2026-jeep-jk-jl-jt","title":"Savvy Legacy Front Bumper Hard Core Corners (Stainless Steel) - 2007-2026 Jeep JK\/JL\/JT","description":"\u003ch4\u003e\u003cstrong\u003eSavvy Offroad Legacy Front Bumper Hard Core Corners | Stainless Steel | JK \/ JKU \/ JL \/ JLU \/ JT 2007–2026 Jeep Wrangler and Gladiator \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The Hard Core Corners are designed exclusively for the \u003cstrong\u003eSavvy Legacy 6061 Aluminum Front Bumper\u003c\/strong\u003e for the JK, JL, JLU, and JT Gladiator. They will not fit any other manufacturer's bumper. Installation requires drilling holes into the Legacy bumper skin and bolting the corners on.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSavvy Offroad Legacy Hard Core Corners\u003c\/strong\u003e solve the one honest trade-off that comes with aluminum bumpers: aluminum is lighter and stronger per pound than steel, but when you are intentionally bashing your bumper corners across rock ledges, dragging them through rock gardens, and dropping into waterfalls, you want stainless steel at the contact point. These corners add exactly that \u003cstrong\u003estainless steel bash plate protection at the most vulnerable area of the Legacy front bumper skin\u003c\/strong\u003e so you get the weight savings of the 6061 aluminum design everywhere it matters and the direct impact resistance of stainless steel exactly where the rocks hit first.\u003c\/p\u003e\n\u003cp\u003eIf you wheel the Legacy bumper hard, these are not optional. They are the upgrade that lets you use the bumper the way it was designed to be used without worrying about what happens to the aluminum skin when you make contact.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBorn From Racing, Not Just Trail Pics\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA lot of companies post trail pics. Not many can post finish line pics. \u003cstrong\u003eSavvy can.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen we say this system was born from racing, we mean it literally. Savvy has stacked more finishes, wins, and championships than any other brand in the armor game proven at the races where equipment either holds or fails in front of everyone watching:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKing of the Hammers\u003c\/strong\u003e: The most demanding off-road race on earth. If your armor survives here, it survives everything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaja\u003c\/strong\u003e: High-speed desert racing where vibration, heat, and repeated impact over hundreds of miles separate real engineering from spec sheet marketing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf it holds up there, the trails we all wheel on feel easy.\u003c\/p\u003e\n\u003cp\u003eWe don't build once and walk away. We keep improving because the trails, the speeds, and the drivers keep pushing the limits. Every refinement in the Legacy line came from breaking something, analyzing why, and building the next version better. That cycle does not stop because the racing does not stop.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBuilt light. Built strong. Built with purpose. Champions run Savvy and that list is long.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Stainless Steel Corners on an Aluminum Bumper\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Savvy Legacy front bumper is built from 6061 aluminum the strongest aluminum alloy in the Savvy lineup, with approximately 35% higher tensile strength than 5052 and nearly double the yield strength. It is the right material for a bumper skin that handles approach geometry, trail contact at speed, and repeated impact across the entire face of the bumper.\u003c\/p\u003e\n\u003cp\u003eThe corners are a different story. The corner of a front bumper is the first point of contact when you drop into a rock ledge, slide through a rock garden, or make hard contact on a tight approach. That contact is concentrated at a single small area a point load rather than the distributed load across a bumper face. Under concentrated point loading, aluminum even 6061 will eventually crack with enough hard abusive hits.\u003c\/p\u003e\n\u003cp\u003eStainless steel at the corner surface changes that equation. The Hard Core Corners provide a skid-plate style stainless steel impact surface at exactly that point deflecting the concentrated rock contact that would otherwise dent or gouge the aluminum skin, while the aluminum skin continues to handle everything else. You keep the weight savings of the aluminum design everywhere that weight matters, and you get stainless toughness at the one spot where the geometry concentrates the hardest hits.\u003c\/p\u003e\n\u003cp\u003eThis is the hybrid material approach that race builds use the right material in the right place for the specific load it is designed to handle.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Construction\u003c\/strong\u003e: Stainless steel is the right material for this application for two reasons: it is harder and more resistant to deformation under concentrated point loading than aluminum, and it is inherently corrosion-resistant no coating required, no rust regardless of trail conditions, salt water, mud, or any environment your Jeep sees. These corners will outlast the bumper they are mounted on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkid Plate \u0026amp; Bash Plate Function\u003c\/strong\u003e: Designed for direct rock contact without deformation. When your bumper corner slides across a ledge, the stainless surface glides over it rather than digging in the way a softer surface would. When a rock hits the corner point-load, the stainless deflects rather than denting. This is bash plate engineering applied to the most vulnerable point on the bumper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects the Aluminum Skin Investment\u003c\/strong\u003e: The Legacy 6061 aluminum bumper skin is a replaceable component but you would rather not replace it. The Hard Core Corners protect the skin at the area most likely to take concentrated impact, extending the service life of the skin and reducing the frequency of replacements for builders who push into rocks intentionally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned Exclusively for the Savvy Legacy Front Bumper\u003c\/strong\u003e: These corners are precision-fit for the Savvy Legacy 6061 aluminum front bumper skin on the JK, JL, JLU, and JT Gladiator. They will not fit any other manufacturer's bumper. The fitment is exact because they were designed as part of the Legacy system, not adapted to fit it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill and Bolt-On Installation\u003c\/strong\u003e: Installation requires drilling holes into the Legacy bumper skin and bolting the corners on. This is a straightforward modification that permanently attaches the corners to the skin for the most secure connection under repeated impact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Across Three Platforms\u003c\/strong\u003e: Works with the Legacy front bumper skin on the 2007–2018 Jeep Wrangler JK \/ JKU, 2018–2026 Jeep Wrangler JL and JLU, and 2020–2026 Jeep Gladiator JT. One set of corners covers the full Legacy front bumper product line across all three JK\/JL\/JT platforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: Engineered and manufactured in America to the same standard as every component in the Savvy Legacy armor system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel corrosion-resistant, ultra-strong, bash plate grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Savvy Legacy 6061 Aluminum Front Bumper only JK \/ JKU (2007–2018), JL\/JLU (2018–2026), JT Gladiator (2020–2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Drill and bolt-on to Legacy bumper skin full guidance included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Bash plate and skid plate protection at bumper corners direct rock contact without deformation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWho Needs Hard Core Corners\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThese are not for every Legacy bumper owner. They are for a specific type of builder and a specific type of use.\u003c\/p\u003e\n\u003cp\u003eYou need Hard Core Corners if your Jeep makes hard intentional bumper contact with rocks meaning you drive into ledges, slide corners across rock faces, drop into obstacle gaps that your bumper navigates through, or run terrain at speed where bumper contact is expected rather than accidental. This is King of the Hammers terrain. This is Moab. This is the kind of wheeling where your bumper does not just provide clearance it takes hits.\u003c\/p\u003e\n\u003cp\u003eYou may not need Hard Core Corners if your Jeep sees trail use where bumper contact is occasional, mild hits and unintentional, and where the 6061 aluminum skin handles that contact without issue. The Legacy skin is tough. For moderate trail use, it does not need the stainless corners to do its job well.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure which category your wheeling falls into, think about the last time your bumper made rock contact.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSavvy Legacy front bumper owners who wheel hard enough to make intentional bumper corner contact with rocks and obstacles\u003c\/li\u003e\n\u003cli\u003eKing of the Hammers, Moab, and rock garden builds where the bumper is designed to contact rocks and the corners take the hardest hits\u003c\/li\u003e\n\u003cli\u003eBuilds across JK, JL, JLU, and JT Gladiator platforms running the Legacy front bumper who want the maximum protection upgrade for their bumper investment\u003c\/li\u003e\n\u003cli\u003eRace-inspired and competition builds where bash plate protection at the bumper corner is a standard part of the front armor specification\u003c\/li\u003e\n\u003cli\u003eLegacy bumper owners who have already dented or gouged a corner on the aluminum skin and want to prevent that from happening on the replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose Savvy Hard Core Corners?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eAluminum front bumpers offer major advantages in \u003cstrong\u003eweight savings and clearance\u003c\/strong\u003e, but the outer corners can still take hard abuse on technical trails. The \u003cstrong\u003eSavvy Hard Core Corners\u003c\/strong\u003e are designed for Jeep owners who want to keep the benefits of the Legacy aluminum bumper while adding \u003cstrong\u003estainless steel impact protection\u003c\/strong\u003e where direct rock contact happens most often.\u003c\/p\u003e\n\u003cp\u003eFor Jeep owners searching for \u003cstrong\u003eJeep bumper corner armor\u003c\/strong\u003e, \u003cstrong\u003eLegacy bumper protection\u003c\/strong\u003e, or a \u003cstrong\u003estainless steel skid upgrade for the Savvy front bumper\u003c\/strong\u003e, this setup offers a strong combination of \u003cstrong\u003eimpact resistance, skid functionality, corrosion resistance, and fitment built specifically around the Legacy bumper platform\u003c\/strong\u003e. It is an ideal add-on for hard trail rigs, crawlers, and Jeeps that routinely see rock contact at the front corners.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit any bumper other than the Savvy Legacy?\u003c\/strong\u003e\u003cbr\u003eNo. The Hard Core Corners are precision-fit specifically for the Savvy Legacy 6061 Aluminum Front Bumper on the JK, JL, JLU, and JT Gladiator. They will not fit any other manufacturer's bumper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes installation require drilling the bumper skin?\u003c\/strong\u003e\u003cbr\u003eYes. Installation requires drilling holes into the Legacy bumper skin for the bolt-on attachment. This is a straightforward modification, the result is a permanently and securely attached stainless corner that handles repeated hard impacts without loosening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these fit all three platforms JK, JL, and JT?\u003c\/strong\u003e\u003cbr\u003eYes. One set of Hard Core Corners fits the Legacy front bumper skin across all three platforms: 2007–2018 Jeep Wrangler JK \/ JKU, 2018–2026 Jeep Wrangler JL and JLU, and 2020–2026 Jeep Gladiator JT.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy stainless steel instead of just thicker aluminum?\u003c\/strong\u003e\u003cbr\u003eStainless steel handles concentrated point loading the kind of impact that occurs at a bumper corner making hard rock contact better than aluminum under repeated direct impact. It is also inherently corrosion-resistant with no coating required. For a component whose entire job is to make rock contact, stainless is the right material choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I still replace the bumper skin if it gets damaged?\u003c\/strong\u003e\u003cbr\u003eYes. The Hard Core Corners bolt to the skin they can be unbolted from a damaged skin and transferred to a replacement skin. Your stainless corner investment transfers with the repair, not into the trash with the damaged skin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need these if I already run the hoop?\u003c\/strong\u003e\u003cbr\u003eThey serve different functions. The hoop protects your grille, radiator, winch, and lighting from debris at the top of the bumper profile. The Hard Core Corners protect the aluminum skin at the corner points where direct rock contact occurs at approach. Both together give you the most complete Legacy front bumper protection available. Neither one replaces the function of the other.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBuilt to bash. Engineered to survive. Born in racing. Built for beating on the trail.\u003c\/strong\u003e\u003c\/h3\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671301939266,"sku":"SD0092","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Front_Legacy_Jeep_bumper_hard_corners_JL_JLU_JT_JK.png?v=1792451564"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/collections\/SAVVY_FRONT_KRAWLER_LITE_HARDCORE_CORNERS_58c6d3de-2cb8-476c-8646-ec38abb17bcb.png?v=1792454878","url":"https:\/\/www.skinnypedalracing.com\/collections\/savvy-jt-rocker-and-corner-armor.oembed","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}