{"title":"Savvy JT Rock Sliders","description":"\u003cp\u003eSavvy Offroad rock sliders for the 2020-2026 Jeep Gladiator JT.\u003c\/p\u003e","products":[{"product_id":"savvy-sliders-krawler-lite-bolt-on-2020-2026-jeep-jt","title":"Savvy Sliders Krawler Lite (Bolt On) - 2020-2026 Jeep JT","description":"\u003ch2\u003e\u003cstrong\u003eSavvy Offroad Krawler Lite Bolt-On Rock Sliders | 2020–2026 Jeep Gladiator JT\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eSavvy Offroad Krawler Lite Bolt-On Rock Sliders\u003c\/strong\u003e are engineered specifically for the 2020–2026 Jeep Gladiator JT a purpose-built Gladiator design, not an adapted Wrangler fitment. They deliver maximum rocker panel and underbody protection, a high-clearance low-profile fit that won't hang up on obstacles, and a \u003cstrong\u003ereplaceable outer skin\u003c\/strong\u003e that unbolts and swaps without removing the slider from your truck. Install in 20–30 minutes using factory mounting points. No cutting, no welding, no frame modification. And when your trails get harder, simply add Savvy's fully boxed weld-on frame brackets to upgrade the same sliders to full weld-on strength no full replacement required.\u003c\/p\u003e\n\u003cp\u003eBorn from off-road racing and proven through real-world trail testing, the Krawler Lite sliders sit high and tight against the Gladiator body for maximum clearance while still providing a functional step surface for daily use. The Gladiator market is underserved by quality slider options most brands focus on the Wrangler and treat the JT as an afterthought. These sliders were built for the Gladiator owner who actually wheels their truck and expects armor that was designed for it.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eChoose Your Level of Protection:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWeld-On Version \u003c\/strong\u003e→ Best for moderate to hardcore off-road abuse, featuring fully boxed 3\/16” frame mounting brackets for superior strength. Weld on version click “HERE”\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Version \u003c\/strong\u003e→ Ideal for light to moderate off-roading, easy installation with ¼” thick steel mounting brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBorn from off-road racing, tested for durability, and built for maximum performance!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-Built for the Jeep Gladiator JT\u003c\/strong\u003e: Engineered using updated Jeep CAD models specifically for the Gladiator JT's frame geometry and rocker panel dimensions. Not adapted from a Wrangler design a dedicated JT fitment that sits high and tight against the Gladiator body the way a purpose-built part should. Fits all 2020–2026 JT trim levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation, 20–30 Minutes\u003c\/strong\u003e: Mounts directly to factory Gladiator JT mounting points using ¼\" thick steel mounting brackets. No cutting, no welding. Installs in 20–30 minutes with basic hand tools and drill. Ideal for light to moderate wheeling and any Gladiator owner who wants strong rocker protection without a fabrication shop visit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgradeable to Weld-On When You're Ready\u003c\/strong\u003e: The bolt-on version is designed to accept Savvy's fully boxed 3\/16\" weld-on frame brackets when your trails demand more. Add the brackets, weld them to the frame, and your existing sliders become a hardcore weld-on setup. No new slider body required the same skin, the same step surface, the same modular design, now with permanent frame reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Outer Skin\u003c\/strong\u003e: The outer body skin is a separate modular component. Take a hard hit on the trail? Unbolt the damaged skin, bolt on a replacement the mounting brackets stay on the truck. This feature exists on both the bolt-on and weld-on versions, and it is what separates Savvy's slider design from nearly every competitor on the Gladiator market.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/16\" CNC Laser-Cut Steel Construction\u003c\/strong\u003e: Maximum strength without unnecessary bulk. Precision-cut for exact fitment on all 2020–2026 Jeep Gladiator JT models. Every bend and cut is CNC-formed for consistent, repeatable quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Clearance, Low-Profile Fitment\u003c\/strong\u003e: Sits high and tight against the JT body to maximize ground clearance and eliminate obstacle hang-ups. Built to protect your rockers without hanging below the frame rail where it would catch on ledges and boulders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Function Step Surface\u003c\/strong\u003e: The top skin surface provides a secure step for entry and exit on lifted Gladiators while staying low-profile enough to avoid snagging on trail obstacles. Practical every day, functional on every trail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-Arm Suspension Compatible\u003c\/strong\u003e: Designed to work with most aftermarket Jeep JT long-arm suspension kits. Verify fitment with your specific suspension setup before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips Raw Steel\u003c\/strong\u003e: Powder coat or paint to your preferred color before or after installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: CNC laser-cut and bent for precision fitment. Designed, tested, and built in America to Savvy's race-proven quality standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020–2026 Jeep Gladiator JT (all trim levels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16\" CNC laser-cut steel body skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bolt-on with ¼\" steel brackets, upgradeable to weld-on with 3\/16\" fully boxed frame brackets (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Time:\u003c\/strong\u003e 20–30 minutes (bolt-on version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin Design:\u003c\/strong\u003e Modular, replaceable outer skin independent of mounting brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Functionality:\u003c\/strong\u003e Top surface, step accessible while maintaining high-clearance profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspension Compatibility:\u003c\/strong\u003e Works with most aftermarket JT long-arm kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgrade Path:\u003c\/strong\u003e Compatible with Savvy weld-on frame brackets for future upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw steel, ready for powder coat or paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eBolt-On vs. Weld-On, Which Is Right for Your Gladiator Build?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBoth versions of the Krawler Lite JT slider use the same outer body skin, the same step surface, the same high-clearance geometry, and the same replaceable modular skin design. The difference is in the mounting brackets and the level of use they are built for and crucially, you can start bolt-on and upgrade to weld-on without buying new sliders.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003ebolt-on version\u003c\/strong\u003e if you wheel light to moderate terrain, want an easy 20–30 minute DIY install with no welding, need the flexibility to remove and reinstall the sliders, or want to start protected now with a clear path to weld-on strength when your build evolves.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eweld-on version\u003c\/strong\u003e if you wheel moderate to hardcore terrain, want the absolute maximum frame reinforcement from day one, and are ready for professional welding installation. See the Savvy Krawler Lite Weld-On Rock Sliders for the JT for that configuration.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2020–2026 Jeep Gladiator JT owners who want strong rocker protection with a fast, clean bolt-on install\u003c\/li\u003e\n\u003cli\u003eLight to moderate trail rigs and daily-driven Gladiators that still see real off-road use\u003c\/li\u003e\n\u003cli\u003eBuilders who want to start bolt-on now with a clear upgrade path to weld-on when ready\u003c\/li\u003e\n\u003cli\u003eJT owners who want modular, repairable armor not a one-piece slider they can never cost-effectively repair after trail damage\u003c\/li\u003e\n\u003cli\u003eGladiator builds running aftermarket long-arm suspension who need a purpose-built JT slider that works with their suspension system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose Savvy Krawler Lite Bolt-On Rock Sliders?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep Gladiator JT bolt-on rock sliders\u003c\/strong\u003e offer simple protection, but few give you the ability to \u003cstrong\u003eupgrade to weld-on later\u003c\/strong\u003e and \u003cstrong\u003ereplace the outer skin after trail damage\u003c\/strong\u003e. The \u003cstrong\u003eSavvy Krawler Lite bolt-on sliders\u003c\/strong\u003e combine \u003cstrong\u003ehigh-clearance protection, modular repairability, step usability, and future upgrade flexibility\u003c\/strong\u003e in one system.\u003c\/p\u003e\n\u003cp\u003eFor Gladiator owners looking for \u003cstrong\u003eJeep JT rock sliders\u003c\/strong\u003e that work for light to moderate wheeling today while keeping the door open for more aggressive builds later, these sliders provide a strong combination of \u003cstrong\u003etight-to-body fitment, strong bolt-on mounting, replaceable skins, and long-arm suspension compatibility\u003c\/strong\u003e. That makes them an ideal choice for daily-driven Gladiators, weekend trail rigs, and builds that evolve over time.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a purpose-built Gladiator JT slider or an adapted Wrangler design?\u003c\/strong\u003e\u003cbr\u003ePurpose-built for the Jeep Gladiator JT using updated Jeep CAD models. The Gladiator has a different wheelbase, frame geometry, and rocker panel dimensions than the Wrangler JL and JLU. These sliders are engineered specifically for the JT not adapted from a Wrangler fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I upgrade these to weld-on later without buying new sliders?\u003c\/strong\u003e\u003cbr\u003eYes. The Krawler Lite bolt-on sliders are designed to accept Savvy's fully boxed 3\/16\" weld-on frame brackets. Add the brackets, weld them to the JT frame, and your existing bolt-on sliders become a full weld-on setup. The slider body, skin, and step surface stay exactly as they are only the mounting system changes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I damage the outer skin on the trail?\u003c\/strong\u003e\u003cbr\u003eThe outer body skin is a modular component that unbolts independently of the mounting brackets. Order a replacement skin, unbolt the damaged one, bolt the new one on. The brackets stay on the truck throughout the entire process. No removing the full slider, no cutting, no fabrication visit required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit all Gladiator JT trim levels?\u003c\/strong\u003e\u003cbr\u003eYes. The Krawler Lite bolt-on sliders fit the 2020–2026 Jeep Gladiator JT across all trim levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does installation take?\u003c\/strong\u003e\u003cbr\u003eThe bolt-on version installs in approximately 20–30 minutes using basic hand tools. It mounts to factory JT frame points no cutting, or welding required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with long-arm suspension?\u003c\/strong\u003e\u003cbr\u003eDesigned to work with most aftermarket Jeep JT long-arm suspension kits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the rocker trim kit included?\u003c\/strong\u003e\u003cbr\u003eNo. Sliders are shown with the rocker trim kit in product images. The rocker trim kit is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003cbr\u003eRaw steel. Powder coat or paint to your preferred color before or after installation.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671296794690,"sku":"SD0033","price":1673.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Jeep_JT_Gladiator_Bolt_On_Sliders.png?v=1792451142"},{"product_id":"savvy-sliders-krawler-lite-weld-on-2020-2026-jeep-jt","title":"Savvy Sliders Krawler Lite (Weld On) - 2020-2026 Jeep JT","description":"\u003ch2\u003e\u003cstrong\u003eSavvy Offroad Krawler Lite Weld-On Rock Sliders | 2020–2026 Jeep Gladiator JT\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eSavvy Offroad Krawler Lite Weld-On Rock Sliders\u003c\/strong\u003e are the strongest, most capable rock sliders available for the 2020–2026 Jeep Gladiator JT and the only weld-on sliders on the market with a \u003cstrong\u003ereplaceable outer skin that unbolts without removing the slider from the frame\u003c\/strong\u003e. Every other weld-on slider on the Gladiator market is a one-piece commitment: take a hard hit, and you are either living with the damage or cutting the entire slider off the frame to replace it. The Savvy Krawler Lite changes that. The fully boxed 3\/16\" steel brackets weld permanently to your JT's frame for strength. The outer body skin bolts on independently and unbolts the same way. Trail damage becomes a skin swap, not a fabrication project.\u003c\/p\u003e\n\u003cp\u003eThe Jeep Gladiator JT is a different animal than the Wrangler longer wheelbase, different frame geometry, different rocker panel dimensions, and a mission that includes both serious trail work and real-world truck duty. These sliders were built specifically for the JT's dimensions, sitting high and tight against the Gladiator body for maximum clearance without the bulk that gets you hung up on the same obstacles you're trying to clear. Born from off-road racing. Proven at King of the Hammers \u0026amp; Baja. Built for the Gladiator owner who actually uses their truck.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e**** shown with rocker trim kit****** purchase separately****\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003eChoose Your Level of Protection:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWeld-On Version\u003c\/strong\u003e → Best for moderate to hardcore off-road abuse, featuring fully boxed 3\/16” frame mounting brackets for superior strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Version \u003c\/strong\u003e→ Ideal for light to moderate off-roading, easy installation with ¼” thick steel mounting brackets. Bolt on version click “HERE”\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBorn from off-road racing, tested for durability, and built for maximum performance!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eThe Feature No Other Gladiator Weld-On Slider Offers\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eWhen you weld a traditional rock slider to your Gladiator's frame, you accept one trade-off: if the outer skin takes a serious hit, your repair options are limited and expensive. You can weld a patch, live with the damage, or cut the entire slider off the frame and start over. None of those options are good.\u003c\/p\u003e\n\u003cp\u003eSavvy solved this by separating the structural frame brackets which weld permanently to the frame for maximum strength from the outer body skin, which bolts on and unbolts independently. Take a hard hit on the trail. Order a replacement skin. Unbolt the damaged one. Bolt the new one on. The frame brackets stay welded. The slider stays on the Gladiator. You are back on the trail faster and for far less than a full slider replacement would cost. This is a feature that does not exist on nearly any other weld-on slider on the market for the Gladiator JT or any other platform.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Boxed Weld-On Frame Brackets\u003c\/strong\u003e: 3\/16\" fully boxed steel frame-mount brackets weld directly to your JT Gladiator's frame for the maximum possible strength and impact resistance. No flex, no rotation under hard hits, no compromise. Built for serious rock crawling, high-speed trail running, and everything in between.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Outer Skin, Unique to Savvy\u003c\/strong\u003e: The outer body skin bolts on independently of the welded frame brackets. Damaged skin? Unbolt it, bolt on a replacement. The welded brackets and the strength they provide stay exactly where they are on your Gladiator's frame. This feature does not exist on nearly any other weld-on slider on the market.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-Built for the Jeep Gladiator JT\u003c\/strong\u003e: The Gladiator's longer wheelbase and different rocker panel geometry require a purpose-built slider design, not an adapted Wrangler fitment. These sliders are engineered specifically for the JT's frame dimensions and body proportions, sitting high and tight against the Gladiator body the way a Gladiator-specific part should.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/16\" CNC Laser-Cut Steel Construction\u003c\/strong\u003e: Maximum strength without unnecessary bulk. Precision-cut for exact fitment on all 2020–2026 Jeep Gladiator JT models. Every bend and cut is CNC-formed for consistent, repeatable quality across every set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Clearance, Low-Profile Fitment\u003c\/strong\u003e: Sits high and tight against the JT body to maximize ground clearance and eliminate obstacle hang-ups. The geometry is designed to protect your rockers without hanging below the frame rail where it would catch on ledges and boulders critical on a truck-length platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Function Step Surface\u003c\/strong\u003e: The wide top skin surface provides a secure step for entry and exit on lifted Gladiators while staying low-profile enough to avoid snagging on trail obstacles. Practical on the trail and useful in the parking lot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-Arm Suspension Compatible\u003c\/strong\u003e: Designed to work with most aftermarket Jeep JT long-arm suspension kits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips Raw Steel\u003c\/strong\u003e: Powder coat or paint to your preferred color before installation. Finishing before welding provides the best corrosion protection on the frame bracket contact points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: CNC laser-cut and bent for precision fitment. Designed, tested, and built in America to Savvy's race-proven quality standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020–2026 Jeep Gladiator JT (all trim levels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16\" CNC laser-cut steel body skin and frame brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Weld-on frame brackets fully boxed 3\/16\" steel, welded directly to JT frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin Design:\u003c\/strong\u003e Modular outer skin bolts on and off independently of welded frame brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Functionality:\u003c\/strong\u003e Wide top surface step accessible while maintaining high-clearance profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspension Compatibility:\u003c\/strong\u003e Works with most aftermarket JT long-arm suspension kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Welding to frame required professional welding recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw steel ready for powder coat or paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut and bent in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWeld-On vs. Bolt-On Which Is Right for Your Gladiator Build?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBoth versions of the Krawler Lite JT slider use the same outer body skin, the same step surface, the same high-clearance geometry, and the same replaceable modular skin design. The difference is entirely in the mounting brackets and the intensity of use they are built for.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eweld-on version\u003c\/strong\u003e if you wheel moderate to hardcore terrain, want the absolute maximum frame reinforcement, are comfortable with professional welding installation, and want the most durable mounting solution available for serious Gladiator rock crawling and trail use.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003ebolt-on version\u003c\/strong\u003e if you wheel light to moderate terrain, want an easy DIY install with no welding, or want the option to remove and reinstall the sliders later. The bolt-on version can also be upgraded to weld-on by adding Savvy's fully boxed weld-on frame brackets when you are ready to go harder.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2020–2026 Jeep Gladiator JT owners who wheel moderate to hardcore terrain and need maximum frame reinforcement\u003c\/li\u003e\n\u003cli\u003eGladiator builders who want weld-on strength but refuse to accept a one-piece slider they can never repair cost-effectively\u003c\/li\u003e\n\u003cli\u003eJT builds running aftermarket long-arm suspension who need a slider engineered to work around it\u003c\/li\u003e\n\u003cli\u003eGladiator owners who have outgrown their bolt-on sliders and are ready to commit to a permanent, hardcore solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose Savvy Krawler Lite Weld-On Rock Sliders?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep Gladiator JT weld-on rock sliders\u003c\/strong\u003e offer strength, but few let you replace the outer skin after trail damage. The \u003cstrong\u003eSavvy Krawler Lite weld-on sliders\u003c\/strong\u003e combine \u003cstrong\u003eframe-mounted strength, high-clearance protection, step usability, and modular repairability\u003c\/strong\u003e in one system.\u003c\/p\u003e\n\u003cp\u003eFor Gladiator owners looking for \u003cstrong\u003eJeep JT rock sliders for hardcore wheeling\u003c\/strong\u003e, these sliders provide a strong combination of \u003cstrong\u003efully boxed weld-on mounting brackets, tight-to-body fitment, long-arm suspension compatibility, and replaceable outer skins\u003c\/strong\u003e. That makes them an ideal choice for rock crawlers, aggressive trail rigs, and Jeep Gladiator builds that need real rocker protection without sacrificing serviceability.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a purpose-built Gladiator JT slider or an adapted Wrangler design?\u003c\/strong\u003e\u003cbr\u003ePurpose-built for the Jeep Gladiator JT. The Gladiator has a longer wheelbase and different frame and rocker panel geometry than the Wrangler JL and JLU. These sliders are engineered specifically for the JT's dimensions not adapted from a Wrangler design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I really replace the skin without removing the slider from the frame?\u003c\/strong\u003e\u003cbr\u003eYes and this is what makes the Savvy weld-on slider unique. The outer body skin bolts onto the welded frame brackets independently. If it gets damaged, unbolt the damaged skin, bolt on a replacement, and you are done. The frame brackets stay welded to your Gladiator's frame throughout the entire process. No cutting, no removing the slider, no fabrication shop visit required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit all Gladiator JT trim levels?\u003c\/strong\u003e\u003cbr\u003eYes. The Krawler Lite weld-on sliders fit the 2020–2026 Jeep Gladiator JT across all trim levels. If you are running a specific aftermarket suspension system, verify long-arm compatibility with your setup before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a professional welder for installation?\u003c\/strong\u003e\u003cbr\u003eYes, it is recommended. The weld-on frame brackets must be welded directly to the JT Gladiator frame. We strongly recommend having this done by a professional welder or an experienced off-road fabrication shop to ensure proper placement and weld quality. Improper welding can affect slider performance and frame integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the weld-on and bolt-on versions?\u003c\/strong\u003e\u003cbr\u003eThe weld-on version uses fully boxed 3\/16\" steel frame brackets welded directly to the frame for maximum hardcore strength. The bolt-on version uses ¼\" steel mounting brackets that attach to factory frame points without welding ideal for light to moderate wheeling and easy DIY installation. Both versions use the same body skin and the same replaceable modular design. The bolt-on version can be upgraded to weld-on later by adding Savvy's weld-on frame brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with my long-arm suspension?\u003c\/strong\u003e\u003cbr\u003eDesigned to work with most aftermarket JT long-arm suspension kits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003cbr\u003eRaw steel. We recommend powder coating or painting before installation for corrosion protection particularly on the frame bracket contact points that will be welded to bare frame metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the rocker trim kit included?\u003c\/strong\u003e\u003cbr\u003eNo. Sliders are shown with the rocker trim kit in product images. The rocker trim kit is sold separately.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671303086146,"sku":"SD0032","price":2037.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/JeepJThigh-clearancerocksliders.png?v=1792451669"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/collections\/JeepJThigh-clearancerocksliders.png?v=1792454931","url":"https:\/\/www.skinnypedalracing.com\/collections\/savvy-jt-rock-sliders.oembed","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}