{"title":"Savvy JL Bumpers","description":"\u003cp\u003eSavvy Offroad bumpers for the 2018-2026 Jeep Wrangler JL and JLU.\u003c\/p\u003e","products":[{"product_id":"savvy-front-bumper-without-hoop-aluminum-surf-turf-winchless-skin-2007-2026-jeep-jk-jku-jl-jlu-jt","title":"Savvy Front Bumper without Hoop (Aluminum Surf \u0026 Turf Winchless Skin) - 2007-2026 Jeep JK\/JKU\/JL\/JLU\/JT","description":"\u003ch3\u003e\u003cstrong\u003eSavvy Offroad Surf \u0026amp; Turf Aluminum Front Bumper Winchless Skin-Only | 2007–2026 Jeep Wrangler JK, JL, JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMeet the \u003cstrong\u003eSavvy Offroad Surf \u0026amp; Turf Aluminum Front Bumper\u003c\/strong\u003e the only winchless, skin-only aluminum front bumper that fits the 2007–2026 Jeep Wrangler JK, JKU, JL, JLU, and 2020–2026 Jeep Gladiator JT in a single design. Built from \u003cstrong\u003e5052 aluminum\u003c\/strong\u003e the same aerospace-grade alloy used throughout the Krawler Lite race armor system it delivers maximum approach clearance, genuine corrosion resistance, and a clean, minimal front end with zero winch weight, zero winch complexity, and zero compromise on quality.\u003c\/p\u003e\n\u003cp\u003eNot every Jeep needs a winch. The Surf \u0026amp; Turf is built for the Jeep that gets driven hard on the beach, the street, and the trail without the extra 30–40 lbs of a winch plate and hardware hanging off the front. It is the bumper for daily drivers, weekend wheelers, overlanders running a recovery kit instead of a winch, and anyone who wants a lightweight, race-inspired front end that looks as good parked on the sand as it does climbing a canyon wall. Add the optional Savvy bolt-on hoop for grille and light protection when the trail gets serious.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne Bumper, Three Platforms\u003c\/strong\u003e: Fits the 2007–2018 Jeep Wrangler JK and JKU, 2018–2026 Jeep Wrangler JL and JLU, and 2020–2026 Jeep Gladiator JT. The only winchless aluminum skin-only front bumper on the market designed to span all three platforms in a single SKU. Note: minimal trimming may be required on JL and JT installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinchless Skin-Only Design, Maximum Weight Savings\u003c\/strong\u003e: By eliminating the winch plate and all associated hardware, the Surf \u0026amp; Turf is dramatically lighter than any Krawler Lite or comparable winch-ready bumper. Less front-end weight means better fuel economy, sharper handling, less front sag on lifted builds, and a cleaner factory-style front profile on daily-driven Jeeps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5052 Aluminum Construction, Corrosion-Proof by Design\u003c\/strong\u003e: 5052 aluminum is the same marine-grade alloy used on boats and aircraft for its exceptional resistance to saltwater corrosion, sand, and UV exposure. If you drive near the coast, through mud, or in any wet environment, this is the alloy your bumper should be made from. Strong, lightweight, and built to last without paint or powder coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Approach Clearance\u003c\/strong\u003e: Inspired by the race-proven Krawler Lite geometry, the Surf \u0026amp; Turf sits high and low-profile for the best approach angles the JK, JL, and JT platforms allow in a no-frame-chop bolt-on design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Savvy Bolt-On Hoop\u003c\/strong\u003e: Want grille and lighting protection when the trail gets technical? Add Savvy's optional bolt-on hoop to the Surf \u0026amp; Turf for integrated front-end coverage and auxiliary light mounting no new bumper required. The hoop bolts on and off as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary Lighting Ready\u003c\/strong\u003e: The open, winchless design provides maximum clearance and flexibility for mounting auxiliary off-road lights. Run pod lights, a light bar, or nothing at all the Surf \u0026amp; Turf stays out of the way of your lighting setup. The bumper ships \u003cstrong\u003eWITHOUT pre-cut light \/ fog openings, \u003c\/strong\u003ebut it can be trimmed to accommodate fog lights, as shown in the product phots. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation\u003c\/strong\u003e: Uses factory mounting points on JK, JL, JLU, and JT. No frame chop, no cutting, no welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips Raw Aluminum\u003c\/strong\u003e: 5052 aluminum's natural corrosion resistance means it can be left raw for a clean, natural look. Or powder coat or paint it to match your build. Either way it won't rust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: CNC laser-cut from race-proven Savvy design geometry. Built in America for the same quality standard as the Krawler Lite line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2007–2026 Jeep Wrangler JK, JKU, JL, JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 5052 CNC laser-cut aluminum marine-grade, corrosion-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Winchless skin-only no winch plate or winch hardware included or required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoop:\u003c\/strong\u003e Compatible with optional Savvy bolt-on hoop (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bolt-on using factory mounting points minimal trimming may be required on JL and JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum ready for powder coat, paint, or use as-is\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eIs the Surf \u0026amp; Turf Right for Your Build?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Surf \u0026amp; Turf is the right bumper if any of these describe your Jeep and how you use it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou don't run a winch and don't want to carry the weight of one on your front end\u003c\/li\u003e\n\u003cli\u003eYou drive near salt water, sand, mud, or wet environments where corrosion resistance matters\u003c\/li\u003e\n\u003cli\u003eYou want a clean, minimal front end that looks factory-fresh but performs better than stock\u003c\/li\u003e\n\u003cli\u003eYou want a bumper that works across JK, JL, and JT without buying platform-specific hardware\u003c\/li\u003e\n\u003cli\u003eYou run a recovery kit traction boards, hi-lift, drag strap instead of a winch\u003c\/li\u003e\n\u003cli\u003eYou want the option to add front hoop protection later without buying a new bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you need a winch, look at the \u003cstrong\u003eKrawler Lite front bumper with winch plate\u003c\/strong\u003e same race-proven aluminum skin design with an integrated 3\/16\" steel winch plate and centered D-ring recovery mounts.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Choose the Savvy Surf \u0026amp; Turf Front Bumper?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep front bumpers\u003c\/strong\u003e are designed around winch mounting, which can add unnecessary weight, bulk, and complexity for Jeep owners who do not need a winch. The \u003cstrong\u003eSavvy Surf \u0026amp; Turf aluminum front bumper\u003c\/strong\u003e is built specifically for drivers who want a \u003cstrong\u003eclean, lightweight, winchless Jeep bumper\u003c\/strong\u003e with improved clearance and a simple, refined look.\u003c\/p\u003e\n\u003cp\u003eFor Jeep owners searching for a \u003cstrong\u003eJeep JK front bumper\u003c\/strong\u003e, \u003cstrong\u003eJeep JL front bumper\u003c\/strong\u003e, or \u003cstrong\u003eJeep Gladiator JT front bumper\u003c\/strong\u003e that keeps the front end light and uncluttered, this bumper delivers a great balance of \u003cstrong\u003eweight savings, corrosion resistance, clean styling, and trail-friendly clearance\u003c\/strong\u003e. It is an ideal choice for daily-driven Jeeps, weekend trail rigs, and builds focused on simplicity and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy “Surf \u0026amp; Turf”?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Surf \u0026amp; Turf name fits Jeep owners who use their rigs both on the coast and on the trail. Whether you are parked on the sand, cruising around town, or working through rocky terrain, this bumper is designed to give your Jeep a clean, capable, lightweight front-end setup with no winch and no unnecessary bulk.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4\u003e\n\u003cstrong\u003eDoes this bumper fit all three platforms: JK, JL, and JT in one piece?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eYes. A single Surf \u0026amp; Turf bumper skin fits the 2007–2018 Jeep Wrangler JK and JKU, 2018–2026 Jeep Wrangler JL and JLU, and 2020–2026 Jeep Gladiator JT.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eCan I add a winch to this bumper?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eNo. The Surf \u0026amp; Turf is a winchless skin-only design with no winch plate or mounting hardware. If you need winch capability, the Krawler Lite front bumper includes an integrated 3\/16\" steel winch plate and D-ring recovery mounts designed for all major winch brands.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eCan I add the Savvy bolt-on hoop to this bumper?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eYes. The Surf \u0026amp; Turf is compatible with Savvy's optional bolt-on hoop for grille protection and auxiliary light mounting. The hoop is sold separately and bolts on without any modification to the bumper skin.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I run auxiliary lights or fog lights with the Surf \u0026amp; Turf bumper?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes! The open, winchless design provides plenty of clearance and flexibility for pod lights, a light bar, or no lights at all. The bumper ships \u003cstrong\u003ewithout pre-cut light openings\u003c\/strong\u003e, but it can be trimmed to accommodate fog lights, as shown in the product photos.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eDoes it require any cutting or frame modification?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eNo frame chop or cutting required. Bolt-on installation using factory mounting points. Minimal trimming may be required on JL and JT models during fitment this is minor and does not affect structural integrity.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eWhy is it called \"Surf \u0026amp; Turf\"?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eThe name reflects the bumper's design intention built for Jeep owners who use their rigs across environments. The 5052 aluminum alloy is the same material used in marine construction for its saltwater corrosion resistance, making it as at home on a beach run as it is on a canyon trail. Surf and turf. Coast and crawl. Whatever your terrain, one bumper covers all of it.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eRaw aluminum. 5052 aluminum has excellent natural corrosion resistance and can be left unfinished for a clean raw look. Or powder coat or paint it to match your build color.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671299612738,"sku":"SD0016","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Jeep_JL_JLU_JT_Winchless_Front_Bumper.png?v=1792451482"},{"product_id":"savvy-front-bumper-without-hoop-aluminum-krawler-lite-2018-2026-jeep-jl-jlu-jt","title":"Savvy Front Bumper without Hoop (Aluminum Krawler Lite) - 2018-2026 Jeep JL\/JLU\/JT","description":"\u003ch2\u003e\u003cstrong\u003eSavvy Offroad Krawler Lite Bolt-On Front Bumper Without Hoop | 2018–2026 Jeep Wrangler JL \/ JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eLightweight. High-Clearance. Race-Proven.\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSavvy Offroad Krawler Lite Front Bumper Without Hoop\u003c\/strong\u003e is the highest-clearance, best-fitting no-frame-chop front bumper available for the 2018–2026 Jeep Wrangler JL, JLU and 2020–2026 Jeep Gladiator JT. In a clean, low-profile design that maximizes both clearance and airflow. At just \u003cstrong\u003e10.5 lbs\u003c\/strong\u003e for the aluminum skin, it delivers \u003cstrong\u003e1.5\" of extra approach clearance\u003c\/strong\u003e over the factory bumper, a winch-ready 3\/16\" steel plate, and centered D-ring recovery mounts, all with a bolt-on install requiring zero cutting, zero welding, and zero frame modification.\u003c\/p\u003e\n\u003cp\u003eWhere the hoop version protects your grille, winch and lighting with an upper tube, the no-hoop version removes that bar entirely giving you a cleaner, more minimal front end with maximum openness for airflow and auxiliary lighting flexibility. Same clearance gains. Same race-proven construction. Just a different aesthetic and lighting approach. Born from racing and proven at King of the Hammers and Baja, this bumper is built for Jeep owners who refuse to compromise on weight, clearance, or quality.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5\" Extra Approach Clearance, No Frame Chop Required\u003c\/strong\u003e: Gains 1.5\" of clearance over the factory bumper using only factory mounting points. No cutting, no frame modification. The highest clearance no-frame-chop front bumper available for the JL, JLU, and JT platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.5 lb Aluminum Skin, Over 50% Lighter Than Steel\u003c\/strong\u003e: The aluminum outer skin weighs just 10.5 lbs. Combined with the 3\/16\" steel winch plate, the complete assembly is still a fraction of comparable steel bumpers. Less front-end weight means better handling, less front sag on lifted builds, and improved fuel economy on daily-driven Jeeps and Gladiators.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Airflow \u0026amp; Lighting Openness\u003c\/strong\u003e: Without the upper hoop, the front of your JL or JT stays completely open. This maximizes airflow to the radiator for cooling efficiency and gives you total freedom in your auxiliary lighting setup light bars, pods, or no lights at all.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty 3\/16\" Steel Winch Plate\u003c\/strong\u003e: Engineered for maximum strength and airflow. Prevents grille interference and supports all major winch brands without flex under recovery load. The steel plate carries the entire winch load the aluminum skin takes no structural stress during winching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with All Major Winches\u003c\/strong\u003e: Works with Warn XD, Warn Zeon, Warn VR Evo, Smittybilt, Badlands, and Superwinches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactor 55 Fairlead Cutout:\u003c\/strong\u003e Hawse fairlead cutout integrated specifically for Factor 55 fairleads to protect synthetic winch rope from sharp edges. Other fairleads may require minor trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentered D-Ring Recovery Mounts\u003c\/strong\u003e: 3\/4\" thick laser-cut steel D-ring mounts centered on the winch plate the strongest pull point on the vehicle. Centering eliminates yaw during winch recoveries for safer, more controlled extractions on uneven terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Front Skin\u003c\/strong\u003e: The aluminum outer skin is a separate modular component from the winch plate. Take a hard hit on the trail? Replace just the skin the winch plate and recovery mounts stay mounted on your Jeep. Faster fix, lower cost, less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bolt-On, No Frame Chop, No Cutting, No Welding\u003c\/strong\u003e: Mounts to factory Jeep JL, JLU, and JT frame points using factory bolt locations. Install at home with basic hand tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: CNC laser-cut and CNC-bent using updated Jeep CAD models for exact factory fitment on all 2018–2026 JL, JLU, and 2020–2026 JT models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2026 Jeep Wrangler JL \/ JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin Weight:\u003c\/strong\u003e 10.5 lbs (aluminum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Plate:\u003c\/strong\u003e 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Gain:\u003c\/strong\u003e 1.5\" over factory bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bolt-on zero frame chop, no cutting or drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e Warn XD, Warn Zeon, Warn VR Evo, Smittybilt, Badlands, Superwinches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFairlead:\u003c\/strong\u003e Factor 55 hawse fairlead cutout (other fairleads may require minor trimming)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery Points:\u003c\/strong\u003e Centered 3\/4\" thick laser-cut steel D-ring mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Modular, replaceable aluminum front skin independent of winch plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum, ready for powder coat or paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut and bent in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eHoop vs. No-Hoop, Which Is Right for Your Build?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eBoth versions of the Krawler Lite front bumper gain the same 1.5\" of approach clearance and use the same steel winch plate, D-ring mounts, and modular skin system. The difference is entirely about your preference for the upper tube.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eno-hoop version\u003c\/strong\u003e if you want maximum airflow openness, total flexibility in your lighting setup, a cleaner low-profile look, or you plan to run a light bar above the bumper line on a separate mount.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003ehoop version\u003c\/strong\u003e if you want the upper tube to guard your grille, radiator, and auxiliary lights from rocks and trail debris or if you like the more aggressive, trail-ready aesthetic the hoop provides.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2018–2026 Jeep JL and JLU owners who want maximum clearance without a frame chop and prefer a clean low-profile look\u003c\/li\u003e\n\u003cli\u003e2020–2026 Jeep Gladiator JT owners upgrading from heavy factory steel\u003c\/li\u003e\n\u003cli\u003eBuilds where front-end weight reduction is a priority — lifted Jeeps, performance-focused builds, daily drivers\u003c\/li\u003e\n\u003cli\u003eWinch builds running Warn, Smittybilt, or other major winch brands\u003c\/li\u003e\n\u003cli\u003eOverlanders and rock crawlers who want full lighting flexibility without a hoop in the way\u003c\/li\u003e\n\u003cli\u003eJL and JT owners who run light bars or pod lights on separate roof or A-pillar mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Choose the Savvy Krawler Lite Front Bumper Without Hoop?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep JL front bumpers\u003c\/strong\u003e and \u003cstrong\u003eJeep Gladiator JT front bumpers\u003c\/strong\u003e add unnecessary weight and bulk that can hurt clearance and front-end performance. The \u003cstrong\u003eSavvy Krawler Lite front bumper without hoop\u003c\/strong\u003e is designed to keep weight down while still delivering the approach angle, recovery capability, and winch-ready strength serious Jeep owners need.\u003c\/p\u003e\n\u003cp\u003eFor Jeep and Gladiator owners looking for a \u003cstrong\u003elightweight front bumper without hoop\u003c\/strong\u003e, this design combines \u003cstrong\u003ehigh-clearance fitment, winch compatibility, integrated recovery points, modular repairability, and a clean low-profile look\u003c\/strong\u003e in one package. Whether your build is for rock crawling, overlanding, or daily driving, this bumper offers a strong balance of function, durability, and styling.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cstrong\u003eBorn from racing. Built for Jeepers. Tested to win.\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require cutting the frame?\u003c\/strong\u003e\u003cbr\u003eNo. This is a true bolt-on design using factory JL, JLU, and JT mounting points. Zero frame chop required. It is the highest clearance no-frame-chop front bumper available for this platform gaining 1.5\" of approach clearance without any permanent modification to your Jeep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit both the Jeep Wrangler JL \/ JLU and the Jeep Gladiator JT?\u003c\/strong\u003e\u003cbr\u003eYes. The Krawler Lite no-hoop front bumper fits the 2018–2026 Jeep Wrangler JL and JLU and the 2020–2026 Jeep Gladiator JT using factory mounting points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this and the hoop version?\u003c\/strong\u003e\u003cbr\u003eThe no-hoop version removes the upper protective tube for a cleaner, more open front end. You get the same 1.5\" clearance gain, the same winch plate, the same D-ring mounts, and the same modular skin system. The only difference is the absence of the upper hoop. See the hoop version if you want grille and light protection from the upper tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you add the hoop later?\u003c\/strong\u003e\u003cbr\u003eYes. The hoop can be purchased and install later if you decide you want to run a hoop style front bumper set up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat winches are compatible?\u003c\/strong\u003e\u003cbr\u003eThe Krawler Lite steel winch plate is compatible with Warn XD, Warn Zeon, Warn VR Evo, Smittybilt, Badlands, and Superwinches. The Factor 55 hawse fairlead cutout is integrated other fairleads may require minor trimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I replace just the skin if it gets damaged?\u003c\/strong\u003e\u003cbr\u003eYes. The aluminum front skin is a separate modular component from the steel winch plate. Order a replacement skin, swap it out on the trail the winch plate and recovery mounts stay on your Jeep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the winch and shackles in the photos included?\u003c\/strong\u003e\u003cbr\u003eNo. Winch, shackles, and fairlead shown in product images are not included and must be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003cbr\u003eRaw aluminum. We recommend powder coating or painting before or after installation to match your build color.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671299678274,"sku":"SD0011A","price":783.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Jeep_JL_aluminum_front_bumper.png?v=1792451483"},{"product_id":"savvy-rear-bumper-legacy-6061-aluminum-2018-2026-jeep-jl-jlu","title":"Savvy Rear Bumper (Legacy 6061 Aluminum) - 2018-2026 Jeep JL\/JLU","description":"\u003ch2\u003e\u003cstrong\u003eSavvy Offroad Legacy 6061 Aluminum Rear Bumper | 2018–2026 Jeep Wrangler JL \/ JLU\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eUpgrade your \u003cstrong\u003e2018-2026 Jeep Wrangler JL or JLU\u003c\/strong\u003e with the \u003cstrong\u003eSavvy Legacy 6061 Aluminum Rear Bumper\u003c\/strong\u003e, engineered for \u003cstrong\u003emaximum rear clearance, lightweight strength, and modular trail-ready durability\u003c\/strong\u003e. Built for Jeep owners who want serious off-road capability without unnecessary rear weight, this \u003cstrong\u003eJeep JL\/JLU rear bumper\u003c\/strong\u003e delivers a tight high-clearance fit, improved departure angle, and a clean aggressive rear profile.\u003c\/p\u003e\n\u003cp\u003eConstructed from \u003cstrong\u003e3\/16-inch CNC laser-cut 6061 aluminum\u003c\/strong\u003e, this \u003cstrong\u003ehigh-clearance rear bumper for Jeep JL and JLU\u003c\/strong\u003e weighs only \u003cstrong\u003e10 lbs\u003c\/strong\u003e, helping reduce rear-end weight while still providing the strength needed for real off-road use. The lightweight design helps improve handling and overall vehicle efficiency compared to heavier steel rear bumpers, while still maintaining strong rear protection where it matters.\u003c\/p\u003e\n\u003cp\u003eWhat sets the \u003cstrong\u003eSavvy Legacy rear bumper\u003c\/strong\u003e apart is its \u003cstrong\u003emodular replaceable rear skin design\u003c\/strong\u003e. If the outer skin takes damage on the trail, it can be replaced without replacing the full bumper assembly. That means easier repairs, lower long-term replacement cost, and better serviceability than many traditional welded rear bumpers.\u003c\/p\u003e\n\u003cp\u003eThe Legacy rear bumper is the right choice for the JL or JLU builder who wants the best aluminum available on their bumper, stronger alloy, more impact resistance, lighter weight combined with geometry that delivers more departure clearance than any bolt-on design can offer.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eLegacy vs. Krawler Lite, The Material Difference That Defines Two Different Bumpers\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBoth bumpers are made from aluminum. That is where the similarity in material ends.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eKrawler Lite\u003c\/strong\u003e uses \u003cstrong\u003e5052 aluminum\u003c\/strong\u003e: a marine-grade alloy with excellent corrosion resistance and good formability. For Jeep owners looking for a lightweight aluminum rear bumper for Jeep JL or JLU, this design combines high-clearance fitment, modular repairability, integrated recovery points, and customizable lighting options in one clean package. Whether your Jeep is a weekend trail rig, overland build, or dedicated crawler, this bumper is built to perform without the weight penalty of traditional steel bumpers\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eLegacy\u003c\/strong\u003e uses \u003cstrong\u003e6061 aluminum\u003c\/strong\u003e: a heat-treated, precipitation-hardened structural alloy that is a fundamentally different material. 6061 has a tensile strength of approximately 45,000 psi versus 5052's 33,000 psi. Its yield strength is roughly double that of 5052. It is harder, more impact resistant, and better suited to taking repeated hard hits from rocks and ledges without deforming. This is the alloy used in aerospace structural components, automotive roll cages, and structural engineering applications where impact resistance is the primary design criterion.\u003c\/p\u003e\n\u003cp\u003eOn a rear bumper that is going to make direct contact with obstacles on technical terrain, that material difference is not a spec sheet detail. It is the difference between a skin that dents on a hard hit and one that resists deformation under the same impact. The Legacy bumper's replaceable skin is still there as a cost-effective repair solution but the 6061 alloy means the skin needs to be replaced less often because it handles more before it fails.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWant the strongest aluminum with maximum impact resistance and maximum departure clearance, and are ready for a frame-mounted install: \u003cstrong\u003eLegacy\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWant excellent aluminum performance in a no-modification bolt-on install that retains factory hitch capability: \u003cstrong\u003eKrawler Lite\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003c!-- [if !supportLists]--\u003e· \u003c!--[endif]--\u003e\u003cstrong\u003e6061 Aluminum, The Strongest Alloy in Savvy's Bumper Lineup\u003c\/strong\u003e: 6061is a heat-treated, precipitation-hardened structural aluminum alloy with a tensile strength approximately 35% higher than the 5052 aluminum used in the Krawler Lite and a yield strength nearly double that of 5052. It is harder, more impact resistant, and better suited to repeated direct contact with rocks and obstacles without deforming. This is the alloy used in aerospace structural components and automotive roll cage applications. At 3\/16\" thickness and 10 lbs total weight, the Legacy rear bumper delivers the highest strength-per-pound of any aluminum rear bumper available for the JL and JLU platform\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Departure Clearance:\u003c\/strong\u003e The rear frame trimming required is the trade-off that unlocks the clearance geometry and, on a JL, or JLU where departure angle is a priority, it is the right trade-off to make. Provides maximum departure angle, ensuring your Jeep clears obstacles effortlessly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnly 10 lbs, 6061 Aluminum Construction\u003c\/strong\u003e: 3\/16\" 6061 aluminum is the same aerospace and structural alloy used throughout the Legacy bumper line chosen for its strength-to-weight ratio, corrosion resistance, and machinability. Less rear weight means better handling, less rear sag on lifted builds, and more performance on every trail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Replaceable Rear Skin\u003c\/strong\u003e: The outer aluminum skin is a separate modular component. Take a hard hit on the trail? Replace just the skin the frame mounts and D-ring mounts stay on the Jeep. Faster fix, lower cost, less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated D-Ring Recovery Mounts\u003c\/strong\u003e: 3\/4\" thick CNC laser-cut steel D-ring shackle mounts built into the bumper structure for real winch recoveries. Low-profile design that does not add bulk or snag points to the bumper profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Frame Trimming Required\u003c\/strong\u003e: The extreme clearance geometry of the Legacy rear bumper requires minimal trimming of the rear frame for proper installation. This is a straightforward modification covered fully in the installation instructions. It is the modification that unlocks the clearance geometry and is the key difference between this and a bolt-on design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips Raw Aluminum\u003c\/strong\u003e: Powder coat or paint to match your build. 6061 aluminum can also be left raw it does not rust and holds up well unfinished.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: Precision CNC laser-cut and bent from updated Jeep JL and JLU CAD models for exact fitment on all 2018–2026 JL 2-door and JLU 4-door models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2026 Jeep Wrangler JL (2-door) and JLU (4-door)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16\" CNC laser-cut 6061 aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Requires minimal rear frame trimming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Lighting Compatible\u003c\/strong\u003e: Designed to accept a wide range of off-road lighting. Use the included template with aftermarket lights to cut the skin for flush-mount fitment with Rigid Industries SR-L, Rigid Ignite, Baja Designs S1, and S2 lights. Lights sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery Points:\u003c\/strong\u003e Integrated 3\/4\" thick CNC laser-cut steel D-ring shackle mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Modular replaceable rear aluminum skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHitch:\u003c\/strong\u003e Does not retain factory JL receiver hitch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum ready for powder coat or paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut and bent in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2018–2026 Jeep JL and JLU builders who have decided that maximum departure clearance is the priority and are ready to commit to a frame-mounted install\u003c\/li\u003e\n\u003cli\u003eBuilds where factory hitch compatibility is not required and the clearance geometry of the Legacy design is worth the trade-off\u003c\/li\u003e\n\u003cli\u003eHardcore rock crawlers and trail rigs where departure angle on the JL or JLU platform is the limiting factor\u003c\/li\u003e\n\u003cli\u003eBuilders upgrading from the Krawler Lite who have decided they want even more clearance and are willing to make the frame trim to get it\u003c\/li\u003e\n\u003cli\u003e2018–2026 Jeep JL and JLU builders who want a stronger race proven bumper skin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Choose the Savvy Legacy 6061 Aluminum Rear Bumper?\u003c\/h2\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep JL\/JLU rear bumpers\u003c\/strong\u003e add unnecessary bulk and weight or make trail damage expensive to fix. The \u003cstrong\u003eSavvy Legacy rear bumper\u003c\/strong\u003e is designed to deliver \u003cstrong\u003etight fitment, high clearance, lightweight construction, integrated recovery capability, and modular repairability\u003c\/strong\u003e in one clean package.\u003c\/p\u003e\n\u003cp\u003eFor Jeep owners looking for the strongest aluminum \u003cstrong\u003eJeep JL rear bumper\u003c\/strong\u003e or \u003cstrong\u003eJeep JLU rear bumper\u003c\/strong\u003e that improves departure angle, reduces rear weight, and still offers real recovery functionality, this design provides a strong balance of \u003cstrong\u003eclearance, performance, serviceability, and clean styling\u003c\/strong\u003e. It is an ideal upgrade for trail rigs, crawlers, and well-built daily-driven Jeeps alike.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow is this different from the Krawler Lite bolt-on rear bumper?\u003c\/strong\u003e\u003cbr\u003eTwo things separate the Legacy from the Krawler Lite is material and clerance. On material: the Legacy uses 6061 aluminum, a heat-treated structural alloy with approximately 35% higher tensile strength and nearly double the yield strength of the 5052 aluminum used in the Krawler Lite. The Legacy skin is harder, more impact resistant, and holds up better under repeated direct rock contact. On clearance: the Legacy requires minimal rear frame trimming, and achieves a tighter lower departure geometry than the bolt-on design allows. The Krawler Lite is bolt-on, no modification required, retains the factory JL receiver hitch, and uses 5052 aluminum excellent performance for its design intent. The Legacy is the stronger material, more clearance option. The Krawler Lite is the no-modification, hitch-compatible, trail-proven bolt-on option. Choose based on which trade-offs match your build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit both the 2-door JL and 4-door JLU?\u003c\/strong\u003e\u003cbr\u003eYes. The Legacy 6061 aluminum rear bumper fits all 2018–2026 Jeep Wrangler JL 2-door and JLU 4-door models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with my factory JL receiver hitch?\u003c\/strong\u003e\u003cbr\u003eNo. The frame-mounted geometry of the Legacy rear bumper does not retain the factory JL receiver hitch. If factory hitch compatibility is required for your build, see the Savvy Krawler Lite bolt-on rear bumper for the JL\/JLU, which is specifically designed to work with the stock receiver hitch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat frame trimming is required?\u003c\/strong\u003e\u003cbr\u003eMinimal trimming of the rear frame is required for proper fitment and to achieve the full clearance geometry. Full installation instructions are included with the bumper. This modification is straightforward and is covered step by step in the included guide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I replace just the skin if it gets damaged on the trail?\u003c\/strong\u003e\u003cbr\u003eYes. The rear aluminum skin is a modular component that replaces independently. Order a replacement skin, swap it out — the frame mounts and D-ring recovery points stay on the Jeep throughout the process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat lighting does this bumper accept?\u003c\/strong\u003e\u003cbr\u003eThe Legacy rear bumper is designed for Rigid SR-L Series pod lights. Additional adapter brackets for flush integration are available separately. Lights are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003cbr\u003eRaw aluminum. Powder coat or paint to your preferred color, or leave natural — 6061 aluminum does not rust in raw condition.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671299711042,"sku":"SD0056","price":1263.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Jeep_JL_rear_bumper.png?v=1792451485"},{"product_id":"savvy-front-bumper-hoop-jeep-jl-jt-jk","title":"Savvy Front Bumper Hoop - Jeep JL\/JT\/JK","description":"\u003cp\u003eJeep JL \/ JT \/ JK front bumper hoop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Front SAVVY Hoop is not just for looks. This hoop not only protects your front grille, but it will protect your lighting investment should you choose to put lights onto the front bumper. We added an incredible approach angle to maximize offroad performance and allow you to climb bigger obstacles. Complete your SAVVY front bumper with the SAVVY Front Hoop.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDesigned and made in the u.s.a\u003c\/li\u003e\n\u003cli\u003eDesigned using new and updated CAD models directly from JEEP\u003c\/li\u003e\n\u003cli\u003eCNC Laser cut, and CNC bent for perfect fitment\u003c\/li\u003e\n\u003cli\u003e75” DOM tubing \u0026amp; 3\/16” base plates\u003c\/li\u003e\n\u003cli\u003eCan be bolted onto your Savvy JL JT JK front bumper skin\u003c\/li\u003e\n\u003cli\u003eIncredible approach angle to maximize offroad performance\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671299874882,"sku":"SD0003","price":318.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/SD0003_SAVVY_JEEP_JL_JLU_JT_JK_FRONT_HOOP_KRAWLER_LITE_AND_LEGACY.png?v=1792451510"},{"product_id":"savvy-front-bumper-without-hoop-legacy-6061-aluminum-2018-2026-jeep-jl-jlu-jt","title":"Savvy Front Bumper without Hoop (Legacy 6061 Aluminum) - 2018-2026 Jeep JL\/JLU\/JT","description":"\u003ch2\u003e\u003cstrong\u003eSavvy Offroad Legacy 6061-T651 Aluminum Front Bumper Without Hoop | 2018–2026 Jeep Wrangler JL \/ JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation note upfront:\u003c\/strong\u003e The Savvy Legacy front bumper requires trimming the front frame plates for proper fitment and to achieve the full clearance geometry. This is the modification that enables the maximum approach angle this bumper delivers. Full instructions are included. The winch plate can be bolted or welded, your choice based on your build and how permanent you want the installation to be. (See instructions below)\u003c\/p\u003e\n\u003cp\u003eAt just \u003cstrong\u003e8 lbs for the aluminum skin\u003c\/strong\u003e, the \u003cstrong\u003eSavvy Offroad Legacy 6061-T651 Aluminum Front Bumper Without Hoop\u003c\/strong\u003e is the lightest front bumper skin in Savvy's entire lineup and the lightest high-clearance no-hoop front bumper available for the 2018–2026 Jeep Wrangler JL, JLU, and 2020–2026 Jeep Gladiator JT. Built from \u003cstrong\u003e3\/16\" 6061 aluminum\u003c\/strong\u003e the heat-treated, precipitation-hardened structural alloy with approximately 35% higher tensile strength and nearly double the yield strength of the 5052 aluminum used in the Krawler Lite line, the Legacy skin delivers more impact resistance in less weight than any competing front bumper in this category. Pair it with the 3\/16\" steel winch plate, centered D-ring recovery mounts, and Factor 55 fairlead compatibility, and this is the complete front bumper system for builders who refuse to compromise on weight, strength, or clearance.\u003c\/p\u003e\n\u003cp\u003eWhat sets the \u003cstrong\u003eSavvy Legacy front bumper\u003c\/strong\u003e apart is its \u003cstrong\u003emodular replaceable front skin design\u003c\/strong\u003e. If the bumper skin is damaged on the trail, it can be replaced without replacing the full bumper assembly. That means easier repairs, lower long-term cost, and better serviceability than many traditional front bumper designs.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eMore off-road wins than any other bumper, born from racing, tested and perfected through King of the Hammers \u0026amp; Baja. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cstrong\u003eBorn From Racing, Not Just Trail Pics\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA lot of companies post trail pics. Not many can post finish line pics. Savvy can.\u003c\/p\u003e\n\u003cp\u003eWhen we say these bumpers were born from racing, we mean it literally. Savvy has stacked more finishes, wins, and championships than any other brand in the armor game proven at the races where equipment either holds or fails in front of everyone watching:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKing of the Hammers: \u003c\/strong\u003eThe most demanding off-road race on earth. Ultra-four rock crawling at speed. If your armor survives here, it survives everything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaja\u003c\/strong\u003e: High-speed desert racing where vibration, heat, and repeated impact over hundreds of miles separate real engineering from spec sheet marketing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf it holds up there, the trails we all wheel on feel easy.\u003c\/p\u003e\n\u003cp\u003eWe don't build once and walk away. We keep improving because the trails, the speeds, and the drivers keep pushing the limits. Every refinement in the Legacy line came from breaking something, analyzing why, and building the next version better. That cycle does not stop because the racing does not stop.\u003c\/p\u003e\n\u003cp\u003eBuilt light. Built strong. Built with purpose. Champions run Savvy and that list is long.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eLegacy vs. Krawler Lite Front Bumper, The Material Difference That Defines the Two Lines\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBoth the Legacy and Krawler Lite no-hoop front bumpers use a 3\/16\" steel winch plate, the same centered D-ring recovery mounts, the same Factor 55 fairlead cutout, and the same modular replaceable skin design. The difference is in the aluminum alloy and the smaller higher clearance Legacy skin.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eKrawler Lite\u003c\/strong\u003e uses \u003cstrong\u003e5052 aluminum:\u003c\/strong\u003e a marine-grade alloy with excellent corrosion resistance. Skin weight: 10.5 lbs. Installs without frame modification using factory mounting points.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eLegacy\u003c\/strong\u003e uses \u003cstrong\u003e6061 aluminum\u003c\/strong\u003e: a heat-treated structural alloy with approximately 35% higher tensile strength and nearly double the yield strength of 5052. Skin weight: 8 lbs. Requires trimming the front frame plates to achieve the full clearance geometry. The winch plate bolts on or welds your choice.\u003c\/p\u003e\n\u003cp\u003eThe Legacy skin is 2.5 lbs lighter, higher clearance and meaningfully stronger. On a front bumper that takes the first hit on every approach, those two numbers lighter and stronger are not contradictory. They are the result of using the right alloy for the application. 6061 is harder and more impact resistant than 5052. It resists deformation better under direct rock contact. And when it does eventually need replacement, you swap the skin not the bumper.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher Clearance 8 lb 6061 Aluminum Skin, Lightest in the Savvy Lineup\u003c\/strong\u003e: The Legacy no-hoop front bumper skin weighs just 8 lbs, 2.5 lbs lighter than the Krawler Lite equivalent and the lightest skin in Savvy's entire front bumper range. 6061 aluminum achieves this because it is a stronger alloy per pound, allowing the same 3\/16\" thickness to deliver more strength at less weight than 5052. Less front-end weight means better handling, less front sag on lifted JLs and JTs, and improved fuel economy on daily-driven builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061 The Strongest Aluminum Alloy in Savvy's Bumper Line\u003c\/strong\u003e: Heat-treated, precipitation-hardened structural aluminum with approximately 35% higher tensile strength and nearly double the yield strength of 5052. Harder surface, higher impact resistance, better behavior under repeated direct rock contact on approach. This is the alloy used in aerospace structural components and precision machined applications where impact resistance is the primary design criterion. At 3\/16\" and 8 lbs, it is the right alloy for a front bumper skin that takes the first hit on every approach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Approach Clearance, Frame Plate Trimming Required\u003c\/strong\u003e: The Legacy front bumper achieves its maximum approach geometry by requiring trimming of the front frame plates during installation. This repositions the bumper lower and tighter against the JL, JLU, and JT body than a no-modification design allows. Full installation instructions are included. This is the modification that unlocks the clearance geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Plate, Bolt or Weld, Your Choice\u003c\/strong\u003e: The 3\/16\" steel winch plate can be bolted to the frame for a strong, removable installation, or welded for a permanent, maximum-strength connection. No other front bumper in this category gives you that choice at the time of installation. Savvy builds the flexibility in so you decide based on your build and how permanent you want the setup to be.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with All Major Winches\u003c\/strong\u003e: Warn XD (Fits best), Warn Zeon (Fits best), Warn VR Evo, Smittybilt, Badlands, and Superwinches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactor 55 Fairlead Cutout\u003c\/strong\u003e: Hawse fairlead cutout specifically designed for Factor 55 fairleads to protect synthetic winch rope from sharp edges and prevent rope wear and fatigue. Other fairleads may require minor trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentered D-Ring Recovery Mounts\u003c\/strong\u003e: 3\/4\" thick laser-cut steel D-ring mounts centered on the winch plate the strongest pull point on the vehicle. Centering eliminates yaw during winch recoveries for safer, more controlled extractions on uneven terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Replaceable Front Skin\u003c\/strong\u003e: The 8 lb aluminum skin is a separate modular component from the steel winch plate. Take a hard hit? Replace the skin. The winch plate, D-ring mounts, and mounting hardware stay on the Jeep throughout the process. Order a skin, not a bumper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Airflow \u0026amp; Lighting Flexibility, No Hoop\u003c\/strong\u003e: The open, no-hoop design maximizes radiator airflow and gives complete freedom in auxiliary lighting placement. Mount a light bar above on a separate bracket, run A-pillar pods, or run no additional lights nothing in the way of your setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits JL, JLU, and JT Gladiator\u003c\/strong\u003e: One bumper design fits the 2018–2026 Jeep Wrangler JL, JLU, and 2020–2026 Jeep Gladiator JT. The same premium 6061aluminum, the same steel winch plate, the same clearance geometry across all three platforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: CNC laser-cut and engineered in America. Winch and shackles shown in images not included and must be purchased separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2026 Jeep Wrangler JL \/ JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin Material:\u003c\/strong\u003e 3\/16\" 6061 CNC laser-cut \u0026amp; bent aluminum heat-treated structural alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin Weight:\u003c\/strong\u003e 8 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Plate:\u003c\/strong\u003e 3\/16\" steel bolt-on or weld-on at installer's choice\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Requires trimming front frame plates full instructions included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e Warn XD, Warn Zeon, Warn VR Evo, Smittybilt, Badlands, Superwinches (Fits best with Warn Zeon \u0026amp; XD \u0026amp; XP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFairlead:\u003c\/strong\u003e Factor 55 hawse fairlead cutout (other fairleads may require minor trimming)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery Points:\u003c\/strong\u003e Centered 3\/4\" thick laser-cut steel D-ring mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Modular replaceable 8 lb aluminum skin independent of winch plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum ready for powder coat or paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Winch and shackles shown in images not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eLegacy No-Hoop vs. Legacy With Hoop, Which Front Bumper Is Right for Your Build?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBoth versions of the Legacy front bumper use the same 6061 aluminum skin, the same 3\/16\" steel winch plate, the same centered D-ring mounts, the same Factor 55 fairlead cutout, and the same modular replaceable skin system. Both require front frame plate trimming. Both give you the bolt or weld choice on the winch plate. The difference is entirely in the upper tube.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eno-hoop version\u003c\/strong\u003e if you want maximum airflow openness, total flexibility in auxiliary lighting placement above the bumper, a cleaner minimal front profile, or if you run a light bar on a separate roof or A-pillar mount above the bumper line.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003ehoop version\u003c\/strong\u003e if you want the upper tube to guard your grille, radiator, and any front-mounted auxiliary lights from rocks, brush, and trail debris or if you prefer the more aggressive, trail-ready aesthetic the protective hoop provides. Both versions deliver the same maximum approach clearance and the same 8 lb skin weight.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2018–2026 Jeep JL, JLU, and Gladiator JT builders who want the strongest, lightest aluminum front bumper skin available and are ready for the frame plate trimming that delivers the full clearance geometry\u003c\/li\u003e\n\u003cli\u003eWinch builds where the bolt-or-weld winch plate choice matches the builder's preference for permanent vs. removable installation\u003c\/li\u003e\n\u003cli\u003eBuilds running auxiliary lighting on roof racks, A-pillar mounts, or separate light bars above the bumper where no hoop in the way matters\u003c\/li\u003e\n\u003cli\u003eWeight-conscious builds where 8 lbs of 6061-T651 aluminum is meaningfully better than 10.5 lbs of 5052 at the same thickness\u003c\/li\u003e\n\u003cli\u003eOverlanders and rock crawlers on the JL, JLU, or JT who want maximum approach clearance in the cleanest, lowest-profile no-hoop package available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose the Savvy Legacy 6061 Aluminum Front Bumper?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep JL\/JLU\/JT front bumpers\u003c\/strong\u003e add unnecessary bulk, reduce airflow, or make trail damage expensive to fix. The \u003cstrong\u003eSavvy Legacy front bumper without hoop\u003c\/strong\u003e is designed to deliver \u003cstrong\u003ebetter clearance, lighter weight, strong recovery capability, winch compatibility, and modular repairability\u003c\/strong\u003e in one clean off-road setup.\u003c\/p\u003e\n\u003cp\u003eFor Jeep owners looking for a \u003cstrong\u003eJeep JL front bumper\u003c\/strong\u003e, \u003cstrong\u003eJeep JLU front bumper\u003c\/strong\u003e, or \u003cstrong\u003eJeep Gladiator JT front bumper\u003c\/strong\u003e that improves approach angle, reduces front-end weight, and still offers strong recovery and winch functionality, this design provides a strong balance of \u003cstrong\u003eclearance, durability, serviceability, and clean styling\u003c\/strong\u003e. It is an ideal upgrade for rock crawlers, overland builds, trail rigs, and well-built daily-driven Jeeps.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require any cutting or frame modification?\u003c\/strong\u003e\u003cbr\u003eYes. The Legacy front bumper requires trimming the front frame plates for proper fitment and to achieve the full clearance geometry. This is the modification that unlocks the maximum approach angle. Full installation instructions are included. If you want a no-modification bolt-on front bumper, see the Savvy Krawler Lite front bumper without hoop for the JL, JLU, and JT. (See instructions below)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the winch plate be bolted or does it have to be welded?\u003c\/strong\u003e\u003cbr\u003eBoth options are available the winch plate can be bolted for a strong, removable installation or welded for a permanent maximum-strength connection. You decide at install time based on your preference. No other front bumper in this category gives you that choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the Legacy use 6061 instead of 5052 aluminum?\u003c\/strong\u003e\u003cbr\u003e6061 is heat-treated and precipitation-hardened, giving it approximately 35% higher tensile strength and nearly double the yield strength of 5052. It is harder, more impact resistant, and handles direct rock contact better on a front bumper that takes the first hit on every approach. The Legacy line uses 6061 because it is the strongest aluminum alloy that makes sense in a bumper skin application stronger per pound than 5052, and stronger per pound than mild steel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Legacy and Krawler Lite no-hoop front bumper?\u003c\/strong\u003e\u003cbr\u003eThree things. First, the Legacy uses 6061aluminum (stronger, harder, more impact resistant) versus the Krawler Lite's 5052 aluminum. Second, the Legacy skin weighs 8 lbs versus the Krawler Lite's 10.5 lbs. Third, the Legacy requires front frame plate trimming to achieve its full clearance geometry the Krawler Lite is bolt-on with no modification required. The steel winch plate, D-ring mounts, Factor 55 fairlead cutout, and modular replaceable skin design are shared across both lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit the Gladiator JT as well as JL and JLU?\u003c\/strong\u003e\u003cbr\u003eYes. The Legacy no-hoop front bumper fits the 2018–2026 Jeep Wrangler JL and JLU and the 2020–2026 Jeep Gladiator JT using the same design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the winch and shackles in the photos included?\u003c\/strong\u003e\u003cbr\u003eNo. Winch, shackles, and fairlead shown in product images are not included and must be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003cbr\u003eRaw aluminum skin \u0026amp; raw steel winch plate. Powder coat or paint to your preferred color. 6061can also be left unfinished it does not rust in raw condition.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671300104258,"sku":"SD0069","price":1341.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Legacy_6061_aluminum_front_bumper_without_hoop_on_2018-2026_Jeep_Wrangler_JL_8_lb_skin_ultra-low_profile.png?v=1792451534"},{"product_id":"savvy-front-bumper-with-hoop-aluminum-krawler-lite-2018-2026-jeep-jl-jlu-jt","title":"Savvy Front Bumper with Hoop (Aluminum Krawler Lite) - 2018-2026 Jeep JL\/JLU\/JT","description":"\u003ch3\u003e\u003cstrong\u003eSavvy Offroad Krawler Lite Bolt-On Front Bumper With Hoop | 2018–2026 Jeep Wrangler JL \/ JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eLightweight. High-Clearance. Race-Proven.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSavvy Offroad Krawler Lite Front Bumper with Hoop\u003c\/strong\u003e is the highest-clearance, best-fitting no-frame-chop front bumper available for the 2018–2026 Jeep Wrangler JL, JLU and 2020–2026 Jeep Gladiator JT. At just \u003cstrong\u003e10.5 lbs\u003c\/strong\u003e for the aluminum skin over 50% lighter than steel it delivers 1.5 inches of extra approach clearance, a winch-ready 3\/16\" steel plate, integrated D-ring recovery mounts, and a protective front hoop, all with a bolt-on install that requires zero cutting, zero welding, and zero frame modification.\u003c\/p\u003e\n\u003cp\u003eBorn from racing and proven at King of the Hammers \u0026amp; Baja, the Krawler Lite is trusted by championship-winning racers and built for Jeep owners who refuse to choose between weight savings and real-world strength. This is not a show bumper. It is a trail bumper that happens to look incredible.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003e\n\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eBorn From Racing, Not Just Trail Pics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA lot of companies post trail pics. Not many can post finish line pics. \u003cstrong\u003eSavvy can.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen we say these bumpers were born from racing, we mean it literally. Savvy has stacked more finishes, wins, and championships than any other brand in the armor game, proven at the races where equipment either holds or fails in front of everyone watching:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKing of the Hammers\u003c\/strong\u003e: The most demanding off-road race on earth. If your armor survives here, it survives everything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaja\u003c\/strong\u003e: High-speed desert racing where vibration, heat, and repeated impact over hundreds of miles separate real engineering from spec sheet marketing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf it holds up there, the trails we all wheel on feel easy.\u003c\/p\u003e\n\u003cp\u003eWe don't build once and walk away. We keep improving because the trails, the speeds, and the drivers keep pushing the limits. Every refinement in the Legacy line came from breaking something, analyzing why, and building the next version better. That cycle does not stop because the racing does not stop.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eBuilt light. Built strong. Built with purpose. Champions run Savvy and that list is long.\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5\" Extra Approach Clearance, No Frame Chop\u003c\/strong\u003e: The Krawler Lite gains 1.5 inches of clearance over the stock bumper without touching your frame rails. Most high-clearance competitors require a frame chop to get near this geometry. You get the clearance without the commitment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin Only 10.5 lbs, Over 50% Lighter Than Steel\u003c\/strong\u003e: The aluminum skin weighs just 10.5 lbs. Combined with the 3\/16\" steel winch plate, the complete assembly is still a fraction of comparable steel bumpers. Less front-end weight means better handling, less front sag, and improved fuel economy on daily-driven Jeeps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Front Hoop\u003c\/strong\u003e: Guards your grille, radiator, and auxiliary lighting from rocks, brush, and trail debris. Enhances approach angles while giving your Jeep an aggressive, trail-ready profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty 3\/16\" Steel Winch Plate\u003c\/strong\u003e: Engineered for maximum strength and airflow. Prevents grille overheating and supports top-rated winches without flex under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Compatible, All Major Brands\u003c\/strong\u003e: Works with Warn XD, Warn Zeon, Warn VR Evo, Smittybilt, Badlands, and Superwinches. Factor 55 fairlead cutout protects synthetic rope from sharp edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentered D-Ring Recovery Mounts\u003c\/strong\u003e: Integrated 3\/4\" thick laser-cut D-ring mounts are centered on the winch plate the strongest pull point on the vehicle. Centering eliminates yaw during winch recoveries for a safer, more controlled extract.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Front Skin\u003c\/strong\u003e: Take a hard hit? Replace just the aluminum skin, not the entire bumper. The winch plate and mounts stay in place. Faster repair, lower cost, less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bolt-On, No Frame Chop, No Cutting, No Welding\u003c\/strong\u003e: Mounts to factory Jeep JL, JLU, and JT frame points using factory bolt locations. Install at home with basic hand tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Lighting Ready\u003c\/strong\u003e: Ample clearance behind the hoop for mounting auxiliary off-road lights. Compatible with most aftermarket lighting brackets and pods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips Raw Aluminum\u003c\/strong\u003e: Powder coat or paint to match your Jeep's build. Raw aluminum also holds up well left unfinished for a classic off-road look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: CNC laser-cut and CNC-bent from updated Jeep CAD models. Every dimension engineered for exact factory fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2026 Jeep Wrangler JL \/ JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBumper Skin Weight:\u003c\/strong\u003e 10.5 lbs (aluminum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Plate:\u003c\/strong\u003e 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Gain:\u003c\/strong\u003e 1.5\" over factory bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bolt-on, no cutting, or frame modification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery Points:\u003c\/strong\u003e Integrated 3\/4\" thick CNC laser-cut D-ring mounts, centered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e Warn XD, Zeon, VR Evo, Smittybilt, Badlands, Superwinches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFairlead:\u003c\/strong\u003e Factor 55 compatible cutout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum, ready for powder coat or paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut and bent in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JL, JLU, and Gladiator JT owners replacing heavy factory steel bumpers\u003c\/li\u003e\n\u003cli\u003eRock crawlers and trail rigs needing maximum approach clearance without a frame chop\u003c\/li\u003e\n\u003cli\u003eWinch builds, any Jeep running a Warn, Smittybilt, or aftermarket winch\u003c\/li\u003e\n\u003cli\u003eOverlanders who need grille and lighting protection on long-distance trail runs\u003c\/li\u003e\n\u003cli\u003eDaily-driven Jeeps where front-end weight and looks both matter\u003c\/li\u003e\n\u003cli\u003eGladiator JT owners who want proven Jeep armor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Choose the Savvy Krawler Lite Front Bumper with Hoop?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep JL front bumpers\u003c\/strong\u003e and \u003cstrong\u003eJeep Gladiator JT front bumpers\u003c\/strong\u003e add bulk and weight that can hurt performance and approach angle. The \u003cstrong\u003eSavvy Krawler Lite front bumper with hoop\u003c\/strong\u003e is designed to keep weight down while still delivering the clearance, recovery capability, and protection serious Jeep owners want.\u003c\/p\u003e\n\u003cp\u003eFor Jeep and Gladiator owners looking for a \u003cstrong\u003elightweight front bumper with hoop\u003c\/strong\u003e, this design combines \u003cstrong\u003ehigh-clearance fitment, winch compatibility, integrated recovery points, modular repairability, and trail-ready protection\u003c\/strong\u003e in one package. Whether your build is for rock crawling, overlanding, or everyday use, this bumper offers a strong balance of performance, function, and clean styling.\u003c\/p\u003e\n\u003cp\u003eWhat sets the \u003cstrong\u003eSavvy Krawler Lite front bumper\u003c\/strong\u003e apart is its \u003cstrong\u003ereplaceable front skin design\u003c\/strong\u003e. If the bumper takes a hit on the trail, the outer skin can be replaced without replacing the entire bumper assembly. That means easier repairs, lower long-term cost, and less downtime for your Jeep or Gladiator build.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch4\u003e\n\u003cstrong\u003eDoes this fit the Jeep Gladiator JT?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eYes. The Krawler Lite front bumper with hoop fits the 2020–2026 Jeep Gladiator JT in addition to the 2018–2026 Jeep Wrangler JL and JLU.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eDoes installation require cutting the frame?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eNo. This is a no-frame-chop design. It bolts directly to factory frame mounting points on the JL, JLU, and JT. No cutting, no welding required.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eWhat winches are compatible?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eThe Krawler Lite winch plate is compatible with Warn XD, Warn Zeon, Warn VR Evo, Smittybilt, Badlands, and Superwinches. The Factor 55 fairlead cutout is integrated to protect synthetic rope.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eCan I replace just the skin if it gets damaged?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eYes. The aluminum front skin is a separate component from the steel winch plate. If you take a hard hit, you order a replacement skin — the winch plate and recovery mounts stay mounted on your Jeep.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eWhat is the difference between the hoop and no-hoop version?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eThe hoop version includes a protective tube above the bumper line that guards your grille, radiator, winch and any mounted auxiliary lights. The no-hoop version is a cleaner, lower-profile look with maximum openness for airflow and lighting flexibility. Both gain the same 1.5\" of approach clearance.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eRaw aluminum. We recommend powder coating or painting to your preferred color. The raw aluminum can also be left as-is for a natural off-road finish.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the hoop interfere with the camera?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo, the front hoop does not interfere with the camera. Your front camera will still work and remain usable with our front bumper with hoop installed.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow tall is the hoop, and what are the largest lights I can fit?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe bottom of the hoop sits \u003cstrong\u003e6.7 inches above the top of the bumper skin\u003c\/strong\u003e. Popular light options that fit include: \u003cstrong\u003eBaja Designs:\u003c\/strong\u003e LP4 lights and smaller models. \u003cstrong\u003eRigid Industries:\u003c\/strong\u003e 6-inch round or XP lights and smaller models. \u003cstrong\u003e20-inch light bars.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671302135874,"sku":"SD0009A","price":1101.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/JL_KRAWLER_LITE_FRONT.png?v=1792451635"},{"product_id":"savvy-front-bumper-with-hoop-legacy-6061-aluminum-2018-2026-jeep-jl-jlu-jt","title":"Savvy Front Bumper with Hoop (Legacy 6061 Aluminum) - 2018-2026 Jeep JL\/JLU\/JT","description":"\u003ch3\u003e\u003cstrong\u003eSavvy Offroad Legacy 6061-T651 Aluminum Front Bumper With Hoop | 2018–2026 Jeep Wrangler JL \/ JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation note upfront:\u003c\/strong\u003e The Savvy Legacy front bumper requires trimming the front frame plates for proper fitment and to achieve the full clearance geometry. The winch plate can be bolted or welded your choice at install time. Winch and shackles shown in product images are not included and must be purchased separately. (See instructions below)\u003c\/p\u003e\n\u003cp\u003eAt just \u003cstrong\u003e8 lbs for the aluminum skin\u003c\/strong\u003e, the \u003cstrong\u003eSavvy Offroad Legacy 6061 Aluminum Front Bumper With Hoop\u003c\/strong\u003e is the lightest front bumper skin in Savvy's lineup and it carries the strongest aluminum alloy available in any Jeep front bumper on the market. Built from \u003cstrong\u003e3\/16\" 6061 aluminum\u003c\/strong\u003e heat-treated, precipitation-hardened, approximately 35% higher tensile strength and nearly double the yield strength of the 5052 aluminum used in the Krawler Lite the Legacy skin delivers more impact resistance in less weight than any competing design. The bolt-on front hoop guards your grille, radiator, and auxiliary lighting from rocks, brush, and trail debris. The 3\/16\" steel winch plate supports every major winch brand. The centered D-ring mounts eliminate yaw during recovery. And the modular replaceable skin means trail damage costs you a skin not a bumper. This \u003cstrong\u003eJeep JL\/JLU\/JT front bumper with hoop\u003c\/strong\u003e improves approach angle, airflow, and trail protection without unnecessary front-end weight, race-proven, and built in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e**** shown with optional stainless hard core bumper upgrade**** purchased separately****\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBorn From Racing, Not Just Trail Pics\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA lot of companies post trail pics. Not many can post finish line pics. \u003cstrong\u003eSavvy can.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen we say these bumpers were born from racing, we mean it literally. Savvy has stacked more finishes, wins, and championships than any other brand in the armor game proven at the races where equipment either holds or fails in front of everyone watching:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKing of the Hammers\u003c\/strong\u003e: The most demanding off-road race on earth. If your armor survives here, it survives everything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaja\u003c\/strong\u003e: High-speed desert racing where vibration, heat, and repeated impact over hundreds of miles separate real engineering from spec sheet marketing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf it holds up there, the trails we all wheel on feel easy.\u003c\/p\u003e\n\u003cp\u003eWe don't build once and walk away. We keep improving because the trails, the speeds, and the drivers keep pushing the limits. Every refinement in the Legacy line came from breaking something, analyzing why, and building the next version better. That cycle does not stop because the racing does not stop.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003e\n\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eBuilt light. Built strong. Built with purpose. Champions run Savvy and that list is long.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cstrong\u003eLegacy vs. Krawler Lite Front Bumper With Hoop, The Material Difference That Defines the Two Lines\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBoth the Legacy and Krawler Lite with-hoop front bumpers use a 3\/16\" steel winch plate, the same centered D-ring recovery mounts, the same Factor 55 fairlead cutout, the same protective front hoop, and the same modular replaceable skin design. The difference is in the aluminum alloy, the skin weight, and the clearance the Legacy skin offers.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eKrawler Lite with hoop\u003c\/strong\u003e uses \u003cstrong\u003e5052 aluminum\u003c\/strong\u003e. Skin weight: 10.5 lbs. Installs without frame modification using factory mounting points.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eLegacy with hoop\u003c\/strong\u003e uses \u003cstrong\u003e6061 aluminum\u003c\/strong\u003e: heat-treated structural alloy with approximately 35% higher tensile strength and nearly double the yield strength of 5052. Skin weight: 8 lbs. Requires trimming the front frame plates. Winch plate bolts or welds on, your choice.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher Clearance 8 lb 6061 Aluminum Skin, Lightest \u0026amp; Strongest in the Savvy Lineup:\u003c\/strong\u003e The Legacy with-hoop front bumper skin weighs just 8 lbs, 2.5 lbs lighter than the Krawler Lite equivalent and the lightest skin in Savvy's entire front bumper range. 6061 achieves this because it is a stronger alloy per pound, delivering more tensile strength and impact resistance at the same 3\/16\" thickness. Less front-end weight means better handling, less front sag on lifted builds, and improved fuel economy on daily-driven JLs and JTs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061 The Strongest Aluminum in Savvy's Bumper Line\u003c\/strong\u003e: Heat-treated, precipitation-hardened structural aluminum with approximately 35% higher tensile strength and nearly double the yield strength of 5052. Harder surface, higher impact resistance, better behavior under repeated direct rock contact on approach. The alloy used in aerospace structural components and precision machined applications where impact resistance is the primary design criterion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Front Hoop, Grille, Winch \u0026amp; Light Protection\u003c\/strong\u003e: The protective front hoop guards your grille, radiator, and any front-mounted auxiliary lights from rocks, brush, and trail debris. Enhances approach angles while giving your JL, JLU, or JT an aggressive, trail-ready profile. Bolt-on design means it can be removed if your build evolves to the no-hoop configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Approach Clearance, Frame Plate Trimming Required\u003c\/strong\u003e: The Legacy front bumper achieves its maximum approach geometry by requiring trimming of the front frame plates during installation. This is the modification that unlocks the clearance geometry. Full installation instructions included. For a no-modification bolt-on option, see the Krawler Lite front bumper with hoop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Plate, Bolt or Weld, Your Choice\u003c\/strong\u003e: The 3\/16\" steel winch plate can be bolted for a strong, removable installation or welded for a permanent maximum-strength connection. You decide at install time. No other front bumper in this category gives you that choice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with All Major Winches\u003c\/strong\u003e: Warn XD (Fits best), Warn Zeon (Fits best), Warn VR Evo, Smittybilt, Badlands, and Superwinches. No adapters or modifications required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactor 55 Fairlead Cutout\u003c\/strong\u003e: Hawse fairlead cutout designed specifically for Factor 55 fairleads to protect synthetic winch rope from sharp edges. Other fairleads may require minor trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentered D-Ring Recovery Mounts\u003c\/strong\u003e: 3\/4\" thick laser-cut steel D-ring mounts centered on the winch plate the strongest pull point on the vehicle. Centering eliminates yaw during winch recoveries for safer, more controlled extractions on uneven terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Replaceable Front Skin\u003c\/strong\u003e: The 8 lb aluminum skin is a separate modular component from the steel winch plate. Take a hard hit? Replace the skin not the bumper. The winch plate, D-ring mounts, hoop, and mounting hardware stay on the Jeep throughout the process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary Lighting Ready\u003c\/strong\u003e: Ample clearance behind the hoop for mounting auxiliary off-road lights. Compatible with most aftermarket lighting brackets and pods without interfering with grille airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits JL, JLU, and JT Gladiator\u003c\/strong\u003e: One bumper design fits the 2018–2026 Jeep Wrangler JL, JLU, and 2020–2026 Jeep Gladiator JT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: CNC laser-cut and engineered in America. Winch and shackles shown in images not included and must be purchased separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2026 Jeep Wrangler JL \/ JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin Material:\u003c\/strong\u003e 3\/16\" 6061 CNC laser-cut \u0026amp; bent aluminum heat-treated structural alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin Weight:\u003c\/strong\u003e 8 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Plate:\u003c\/strong\u003e 3\/16\" steel bolt-on or weld-on at installer's choice\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoop:\u003c\/strong\u003e Bolt-on front hoop included grille and lighting protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Requires trimming front frame plates full instructions included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e Warn XD \u0026amp; XP (Fits best) , Warn Zeon (Fits best), Warn VR Evo, Smittybilt, Badlands, Superwinches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFairlead:\u003c\/strong\u003e Factor 55 hawse fairlead cutout (other fairleads may require minor trimming)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery Points:\u003c\/strong\u003e Centered 3\/4\" thick laser-cut steel D-ring mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Modular replaceable 8 lb aluminum skin independent of winch plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum ready for powder coat or paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Winch and shackles shown in images not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eHoop vs. No-Hoop, Which Legacy Front Bumper Is Right for Your Build?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBoth versions of the Legacy front bumper use the same 8 lb 6061 aluminum skin, the same 3\/16\" steel winch plate, the same centered D-ring mounts, the same Factor 55 fairlead cutout, the same modular replaceable skin system, and the same bolt-or-weld winch plate choice. Both require front frame plate trimming. The difference is entirely in the upper tube.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003ehoop version\u003c\/strong\u003e if you want the upper tube to guard your winch, grille, radiator, and front-mounted auxiliary lights from rocks, brush, and trail debris or if you prefer the more aggressive, trail-ready aesthetic the protective hoop provides. The hoop bolts on, meaning it can be removed later if your build preferences change.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eno-hoop version\u003c\/strong\u003e if you want maximum airflow openness, total flexibility in auxiliary lighting placement, a cleaner minimal front profile. See the \u003cstrong\u003eSavvy Legacy 6061 Front Bumper Without Hoop\u003c\/strong\u003e for that configuration.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2018–2026 Jeep JL, JLU, and Gladiator JT builders who want the strongest, lightest aluminum front bumper with hoop protection and are ready for the frame plate trimming that delivers the full clearance geometry\u003c\/li\u003e\n\u003cli\u003eBuilds where grille, radiator, and front-mounted light protection from the upper hoop is a priority\u003c\/li\u003e\n\u003cli\u003eWinch builds where the bolt-or-weld winch plate choice matches the builder's preference\u003c\/li\u003e\n\u003cli\u003eWeight-conscious builds where 8 lbs of 6061-T651 aluminum is meaningfully better than 10.5 lbs of 5052 at the same thickness\u003c\/li\u003e\n\u003cli\u003eBuilders upgrading from the Krawler Lite who want the stronger alloy and the frame-trimmed clearance geometry that comes with it\u003c\/li\u003e\n\u003cli\u003eRock crawlers and overlanders on the JL, JLU, or JT who want maximum approach clearance with full front-end protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose the Savvy Legacy 6061 Aluminum Front Bumper with Hoop?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep JL\/JLU\/JT front bumpers with hoop\u003c\/strong\u003e add unnecessary bulk, reduce airflow, or make trail damage expensive to fix. The \u003cstrong\u003eSavvy Legacy front bumper with hoop\u003c\/strong\u003e is designed to deliver \u003cstrong\u003ebetter clearance, lighter weight, strong recovery capability, winch compatibility, hoop protection, and modular repairability\u003c\/strong\u003e in one clean off-road setup.\u003c\/p\u003e\n\u003cp\u003eFor Jeep owners looking for a \u003cstrong\u003eJeep JL front bumper with hoop\u003c\/strong\u003e, \u003cstrong\u003eJeep JLU front bumper with hoop\u003c\/strong\u003e, or \u003cstrong\u003eJeep Gladiator JT front bumper with hoop\u003c\/strong\u003e that improves approach angle, reduces front-end weight, and still offers strong recovery and winch functionality, this design provides a strong balance of \u003cstrong\u003eclearance, durability, serviceability, and aggressive styling\u003c\/strong\u003e. It is an ideal upgrade for rock crawlers, overland builds, trail rigs, and well-built daily-driven Jeeps.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch4\u003e\n\u003cstrong\u003eDoes this require any cutting or frame modification?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eYes. The Legacy front bumper requires trimming the front frame plates for proper fitment and to achieve the full clearance geometry. Full installation instructions are included. For a no-modification bolt-on front bumper with hoop, see the Savvy Krawler Lite front bumper with hoop for the JL, JLU, and JT. (See instructions below)\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eCan the winch plate be bolted or does it have to be welded?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eBoth options are available the winch plate can be bolted for a strong, removable installation or welded for a permanent maximum-strength connection. You decide at install time. No other front bumper in this category gives you that choice built in.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eIs the hoop removable?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eYes. The front hoop is a bolt-on component. If your build preferences change and you prefer the no-hoop configuration later, the hoop can be removed. The bumper skin, winch plate, and all hardware remain in place.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow tall is the hoop, and what are the largest lights I can fit?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe bottom of the hoop sits \u003cstrong\u003e6.7 inches above the top of the bumper skin\u003c\/strong\u003e. Popular light options that fit include: \u003cstrong\u003eBaja Designs:\u003c\/strong\u003e LP4 lights and smaller models. \u003cstrong\u003eRigid Industries:\u003c\/strong\u003e 6-inch round or XP lights and smaller models. \u003cstrong\u003e20-inch light bars.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy does the Legacy use 6061 instead of 5052 aluminum?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e6061 is heat-treated and precipitation-hardened, giving it approximately 35% higher tensile strength and nearly double the yield strength of 5052. It is harder, more impact resistant, and handles direct rock contact better on a front bumper that takes the first hit on every approach. The Krawler Lite uses 5052 excellent for its bolt-on application. The Legacy uses 6061 because it is the strongest aluminum alloy that makes sense in a bumper skin stronger per pound than 5052, and stronger per pound than mild steel.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eWhat is the difference between the Legacy and Krawler Lite with-hoop front bumper?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eThree things. First, the Legacy uses 6061 aluminum versus the Krawler Lite's 5052. Second, the Legacy skin is higher clearance. Third, the Legacy requires front frame plate trimming, the Krawler Lite is bolt-on with no modification required.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes this fit the Gladiator JT as well as JL and JLU?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. The Legacy with-hoop front bumper fits the 2018–2026 Jeep Wrangler JL and JLU and the 2020–2026 Jeep Gladiator JT using the same design.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eAre the winch and shackles in the photos included?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eNo. Winch, shackles, and fairlead shown in product images are not included and must be purchased separately.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eWhat finish does it ship in?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eRaw aluminum \u0026amp; raw steel. Powder coat or paint to your preferred color. 6061 can also be left unfinished it does not rust in raw condition.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671302463554,"sku":"SD0070","price":1658.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Jeep_JL_front_bumper_with_hoop.png?v=1792451617"},{"product_id":"savvy-rear-bumper-bolt-on-aluminum-krawler-lite-2018-2026-jeep-jl-jlu","title":"Savvy Rear Bumper Bolt On (Aluminum Krawler Lite) - 2018-2026 Jeep JL\/JLU","description":"\u003ch3\u003e\u003cstrong\u003eSavvy Offroad Krawler Lite Bolt-On Rear Bumper | 2018–2026 Jeep Wrangler JL \/ JLU\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eAt just \u003cstrong\u003e12.5 lbs\u003c\/strong\u003e, the \u003cstrong\u003eSavvy Offroad Krawler Lite Bolt-On Rear Bumper\u003c\/strong\u003e is the lightest high-performance aluminum rear bumper available for the 2018–2026 Jeep Wrangler JL and JLU. It delivers maximum departure angle, full factory hitch compatibility, integrated recovery points, and a modular replaceable skin, all with zero cutting, zero drilling, and zero modifications required. Bolt it on, hit the trail.\u003c\/p\u003e\n\u003cp\u003eBuilt from 3\/16\" CNC laser-cut aluminum and race-proven through King of the Hammers, the Krawler Lite rear bumper fits tight to the body for the highest clearance of any bolt-on Jeep JL rear bumper on the market. Whether you're rock crawling, overlanding, or daily driving, this bumper handles it all without adding unnecessary weight to your rear end.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightest Bolt-On Rear Bumper for Jeep JL \/ JLU: \u003c\/strong\u003eOnly 12.5 lbs. The factory steel rear bumper weighs nearly 5x that. Less unsprung weight means better handling, better fuel economy, and less rear sag on lifted builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Departure Angle: \u003c\/strong\u003eTight-fitting high-clearance design maximizes how steep an obstacle you can descend without the bumper catching. No hang-ups, no dragging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bolt-On, No Modifications: \u003c\/strong\u003eMounts to factory Jeep JL \/ JLU frame points. No cutting, no drilling, no welding. Straightforward install with Factory hardware \u0026amp; included hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Hitch Compatible: \u003c\/strong\u003eWorks seamlessly with the stock Jeep JL receiver hitch. Tow your trailer, carry your bike rack, or run a hitch accessory without replacing anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated D-Ring Recovery Mounts:\u003c\/strong\u003e Heavy-duty 3\/4\" thick laser-cut steel D-ring shackle mounts are E-coated and ready to install. Strong, corrosion-resistant recovery points built into the bumper no add-ons needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Rear Skin: \u003c\/strong\u003eTake a hard hit on the trail? Replace just the outer skin, not the entire bumper. Faster repair, lower cost, less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Lighting Compatible: \u003c\/strong\u003eDesigned to accept a wide range of off-road lighting. Use the included template with aftermarket lights to cut the skin for flush-mount fitment with Rigid Industries SR-L, Rigid Ignite, Baja Designs S1, and S2 lights. Lights sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup Sensor Ready: \u003c\/strong\u003eFactory backup sensor holes are pre-cut into the bumper. Rubber sensor plugs included. Plug them if you don't run sensors. Cut the skin smooth if you want a clean look (see customer photo).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA: \u003c\/strong\u003eCNC laser-cut and precision-engineered from updated Jeep JL CAD models for exact fitment. Designed, tested, and built in America.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2026 Jeep Wrangler JL \/ JLU (2-door and 4-door)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16\" CNC laser-cut aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.5 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Direct bolt-on no cutting or drilling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHitch:\u003c\/strong\u003e Compatible with factory Jeep JL receiver hitch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery Points:\u003c\/strong\u003e Integrated 3\/4\" thick laser-cut D-ring shackle mounts, E-coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Cuttable template for Rigid SR-L flush mount, Rigid Ignite, Baja Designs S1 \u0026amp; S2 (lights sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Holes:\u003c\/strong\u003e Pre-cut Sensor Holders \u0026amp; rubber plugs included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships raw aluminum ready for powder coat or paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut and bent in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare Tire: \u003c\/strong\u003eCan use with 40\" spare tire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2018–2026 Jeep Wrangler JL \/ JLU owners replacing heavy factory steel bumpers\u003c\/li\u003e\n\u003cli\u003eRock crawlers and trail rigs needing maximum departure angle\u003c\/li\u003e\n\u003cli\u003eBuilds where rear weight reduction matters lifted Jeeps, performance-focused builds\u003c\/li\u003e\n\u003cli\u003eDaily-driven Jeeps that still need real recovery capability\u003c\/li\u003e\n\u003cli\u003eJeep owners who tow and need factory hitch compatibility\u003c\/li\u003e\n\u003cli\u003eBuilders who want custom lighting without buying a separate light bar bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Choose the Savvy Krawler Lite Jeep JL\/JLU Rear Bumper?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMany \u003cstrong\u003eJeep JL rear bumpers\u003c\/strong\u003e add unnecessary bulk, reduce departure angle, or require sacrificing factory hitch compatibility. The \u003cstrong\u003eSavvy Krawler Lite bolt-on rear bumper\u003c\/strong\u003e is designed to give you the clearance and protection you want while keeping the weight down and retaining compatibility with your stock receiver hitch.\u003c\/p\u003e\n\u003cp\u003eFor Jeep owners looking for a \u003cstrong\u003elightweight aluminum rear bumper for Jeep JL or JLU\u003c\/strong\u003e, this design combines \u003cstrong\u003ehigh-clearance fitment, modular repairability, integrated recovery points, and customizable lighting options\u003c\/strong\u003e in one clean package. Whether your Jeep is a weekend trail rig, overland build, or dedicated crawler, this bumper is built to perform without the weight penalty of traditional steel bumpers.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003e\n\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit both the 2-door JL and 4-door JLU?\u003c\/strong\u003e\u003cbr\u003eYes. The Krawler Lite bolt-on rear bumper fits all 2018–2026 Jeep Wrangler JL (2-door) and JLU (4-door) models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with my factory tow hitch?\u003c\/strong\u003e\u003cbr\u003eYes. This bumper is specifically designed to work with the stock Jeep JL receiver hitch no modifications or hitch relocation required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the bumper in one photo not have sensor holes?\u003c\/strong\u003e\u003cbr\u003eAll bumpers ship with factory backup sensor holes pre-cut and rubber plugs included. The photo showing no holes is a customer build where the holes were welded shut and the bumper refinished. Your bumper will come with the holes and plugs as standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat lights does this bumper fit?\u003c\/strong\u003e\u003cbr\u003eThe rear skin can be trimmed for Rigid Industries SR-L Flush Mount, Rigid Ignite Flush Mount, and Baja Designs S1 \u0026amp; S2 Non-Flush Mount lights. All lights are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I replace just the skin if I damage it on the trail?\u003c\/strong\u003e\u003cbr\u003eYes. The Krawler Lite uses a modular design the outer skin unbolts and replaces independently. You never need to buy a full new bumper after trail damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it ship painted or finished?\u003c\/strong\u003e\u003cbr\u003eShips raw aluminum. We recommend powder coating or painting to your preferred color before or after installation.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671302987842,"sku":"SD0006A","price":567.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/JeepJLaluminumrearbumperwithhigh-clearancedesignandfactoryhitchcompatibility.png?v=1792451652"},{"product_id":"savvy-front-bumper-with-hoop-aluminum-surf-turf-winchless-skin-2007-2026-jeep-jk-jku-jl-jlu-jt","title":"Savvy Front Bumper with Hoop (Aluminum Surf \u0026 Turf Winchless Skin) - 2007-2026 Jeep JK\/JKU\/JL\/JLU\/JT","description":"\u003ch3\u003e\u003cstrong\u003eSavvy Offroad Surf \u0026amp; Turf Aluminum Front Bumper with Hoop, (Winchless Skin) | 2007–2026 Jeep Wrangler JK, JKU, JL, JLU \u0026amp; 2020–2026 Jeep Gladiator JT\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMeet the \u003cstrong\u003eSavvy Offroad Surf \u0026amp; Turf Aluminum Front Bumper with Bolt-On Hoop\u003c\/strong\u003e a lightweight, winchless front bumper built for Jeep owners who want clean styling, trail-friendly clearance, and added coverage in front of the grille.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003e5052 aluminum\u003c\/strong\u003e, the Surf \u0026amp; Turf bumper skin delivers excellent corrosion resistance without the weight and bulk of a winch plate. This configuration \u003cstrong\u003eincludes the Savvy bolt-on hoop\u003c\/strong\u003e, giving your Jeep a more aggressive front profile while keeping the simple, open design that makes the Surf \u0026amp; Turf stand out.\u003c\/p\u003e\n\u003cp\u003eNot every Jeep needs a winch. Whether you’re cruising the coast, commuting during the week, or exploring trails on the weekend, the Surf \u0026amp; Turf with Hoop gives your build a clean, capable front end without unnecessary winch hardware.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits JK, JL, and JT Platforms:\u003c\/strong\u003e One bumper skin fits the 2007–2018 Jeep Wrangler JK\/JKU, 2018–2026 Jeep Wrangler JL\/JLU, and 2020–2026 Jeep Gladiator JT. Minimal trimming may be required on JL and JT installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSavvy Bolt-On Hoop Included:\u003c\/strong\u003e This version comes with the Savvy bolt-on hoop for added grille and lighting coverage, auxiliary light mounting options, and a distinctive off-road look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight, Winchless Design:\u003c\/strong\u003e Eliminates the winch plate and associated winch mounting hardware for a simple front-end setup focused on clearance and reduced weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5052 Aluminum Bumper Skin:\u003c\/strong\u003e Strong, lightweight, and naturally corrosion-resistant, making it well suited to coastal driving, muddy trails, and wet conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Clearance Profile:\u003c\/strong\u003e Inspired by Savvy’s Krawler Lite geometry, the compact bumper skin keeps the front end tucked up for trail obstacles without requiring a frame chop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Lighting Setup:\u003c\/strong\u003e Configure your build with auxiliary pod lights, a light bar, or no additional lighting. \u003cstrong\u003eThe bumper ships without pre-cut light or fog light openings\u003c\/strong\u003e, but the skin can be trimmed to accommodate fog lights, as shown in the product photos.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Mounting Points:\u003c\/strong\u003e Bolts to factory bumper mounting locations with no welding or frame chop required. Minor fitment trimming may be necessary on JL and JT models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaw Aluminum Bumper Skin:\u003c\/strong\u003e Leave the skin raw for a clean aluminum look, or paint or powder coat it to match your build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e CNC laser-cut aluminum bumper skin built with Savvy’s attention to fit, clearance, and function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWrangler JK\/JKU Fitment:\u003c\/strong\u003e 2007–2018\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWrangler JL\/JLU Fitment:\u003c\/strong\u003e 2018–2026\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGladiator JT Fitment:\u003c\/strong\u003e 2020–2026\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBumper Skin Material:\u003c\/strong\u003e 5052 aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Winchless, skin-only bumper with bolt-on hoop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoop:\u003c\/strong\u003e Savvy bolt-on hoop included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e No winch plate or winch mounting provisions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Factory mounting points; minimal trimming may be required on JL and JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Openings:\u003c\/strong\u003e None; trimming required for recessed fog light installations as seen in pictures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBumper Skin Finish:\u003c\/strong\u003e Raw aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC laser-cut in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eIs the Surf \u0026amp; Turf with Hoop Right for Your Build?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis configuration is a great fit if you:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWant a lightweight front bumper without a winch plate.\u003c\/li\u003e\n\u003cli\u003ePrefer the appearance and added front-end coverage of a hoop.\u003c\/li\u003e\n\u003cli\u003eWant flexibility for auxiliary lighting.\u003c\/li\u003e\n\u003cli\u003eDrive in coastal or wet environments where corrosion resistance matters.\u003c\/li\u003e\n\u003cli\u003eWant a compact bumper for daily driving and weekend trail use.\u003c\/li\u003e\n\u003cli\u003ePrefer a removable, bolt-on hoop over a permanently welded design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNeed a winch?\u003c\/strong\u003e Explore the \u003cstrong\u003eSavvy Krawler Lite front bumper with winch plate\u003c\/strong\u003e, which pairs an aluminum bumper skin with a 3\/16-inch steel winch plate and centered D-ring recovery mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose the Savvy Surf \u0026amp; Turf Front Bumper with Hoop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMany Jeep front bumpers are built around a winch, adding hardware and bulk that some drivers simply don’t need. The \u003cstrong\u003eSurf \u0026amp; Turf with Hoop\u003c\/strong\u003e combines a purpose-built winchless design with the styling and added coverage of the included Savvy hoop.\u003c\/p\u003e\n\u003cp\u003eWhether you’re shopping for a \u003cstrong\u003eJeep JK front bumper with hoop\u003c\/strong\u003e, a \u003cstrong\u003eJeep JL aluminum front bumper\u003c\/strong\u003e, or a \u003cstrong\u003eGladiator JT winchless bumper\u003c\/strong\u003e, the Surf \u0026amp; Turf offers a practical combination of low weight, corrosion resistance, and trail-friendly clearance.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy “Surf \u0026amp; Turf”?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eCoast or canyon, sand or street the Surf \u0026amp; Turf is built for Jeeps that do a little of everything. Its corrosion-resistant aluminum skin is well suited to coastal environments, while its compact profile provides clearance for trail use. The included hoop completes the look without adding a winch plate you don’t need.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the Savvy bolt-on hoop included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. This listing includes the Surf \u0026amp; Turf aluminum bumper skin \u003cstrong\u003eand the Savvy bolt-on hoop\u003c\/strong\u003e. You do not need to purchase the hoop separately.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhich Jeep models does this bumper fit?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eIt fits 2007–2018 Wrangler JK\/JKU, 2018–2026 Wrangler JL\/JLU, and 2020–2026 Gladiator JT models. The same bumper skin works across all three platforms. Minimal trimming may be required on JL and JT installations.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I add a winch to this bumper?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. The Surf \u0026amp; Turf is a winchless design with no winch plate or winch mounting provisions. Adding the hoop does not change its winch compatibility. For a winch-ready setup, choose the Savvy Krawler Lite front bumper with winch plate.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I remove the hoop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. The Savvy hoop bolts on and off, allowing you to change the bumper’s appearance and configuration without replacing the skin.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I run auxiliary lights or fog lights?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. The open, winchless layout provides flexibility for auxiliary lighting. The bumper ships \u003cstrong\u003ewithout pre-cut light or fog light openings\u003c\/strong\u003e, but the aluminum skin can be trimmed to accommodate fog lights, as shown in the product photos. Light fitment and mounting requirements depend on your chosen setup.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the bumper come with Hardcore Corners?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. Hardcore Corners are an optional add-on and are sold separately. You can find them \"here\".\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes installation require cutting or welding?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo welding or frame chop is required. The bumper uses factory mounting points, although minimal trimming may be required on JL and JT models. Installing fog lights through the bumper skin requires cutting your own light openings.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat finish does the bumper skin ship in?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe bumper skin ships in raw 5052 aluminum and the hoop ship in raw steel. Its natural corrosion resistance allows it to be used unfinished, or you can paint or powder coat it to match your Jeep.\u003c\/p\u003e","brand":"Savvy Offroad","offers":[{"title":"Default Title","offer_id":45671305478210,"sku":"SD0130","price":631.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/Savvy_Offroad_Surf_Turf_winchless_aluminum_front_bumper_with_bolt-on_hoop_ad203c17-0886-488a-b15f-c0cff84f7097.png?v=1792451777"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/collections\/SD0003_SAVVY_JEEP_JL_JLU_JT_JK_FRONT_HOOP_KRAWLER_LITE_AND_LEGACY.png?v=1792454865","url":"https:\/\/www.skinnypedalracing.com\/collections\/savvy-jl-bumpers.oembed","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}