{"title":"Ranger BDS 3.5\" Suspension Lift","description":null,"products":[{"product_id":"35-inch-lift-kit-fox-20-coil-over-ford-ranger-19-23-4wd-cast-aluminum-fox-20-performance-shocks","title":"3.5 Inch Lift Kit FOX 2.0 Coil-Over Ford Ranger 19-23 4WD Cast Aluminum Fox 2.0 Performance Shocks","description":"\u003cp\u003eTake your 2019-2023 Ford Ranger truck to the next level with a 3.5-inch lift kit with FOX 2.0 Coil-Over shocks from BDS. Specially designed for the new Ranger, this 3.5 inch leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.\u003c\/p\u003e\n\u003cp\u003eTo ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates.\u003c\/p\u003e\n\u003cp\u003eAlso supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit includes heavy duty lift shackles and custom-tuned matching FOX 2.0 Performance series shocks.\u003c\/p\u003e\n\u003cp\u003eFOX 2.0 Coil-Over Shocks\u003cbr\u003eThese FOX 2.0 Performance Series coil-overs bring impressive damper performance for great ride on and offroad capability designed as a direct bolt-in replacement for the factory strut.\u003c\/p\u003e\n\u003cp\u003eThey feature a 2.0 inch extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX's proprietary internals, 5\/8 inch hard chrome plated heat treated alloy shaft and come preloaded with springs and top-plate for easy installation.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms (UCAs)\u003cbr\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability.\u003c\/p\u003e\n\u003cp\u003eArms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFOX Performance IFP shocks eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving\u003c\/li\u003e\n\u003cli\u003eHD Upper control arms provide superior strength and proper alignment\u003c\/li\u003e\n\u003cli\u003eAdjustable height to fine tune\u003c\/li\u003e\n\u003cli\u003eProvides level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eEasy, 100 percent Bolt On installation\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(Trimming may be required)\u003c\/li\u003e\n\u003cli\u003e285 \/ 65 with 18 x 9 and 5.75 in. Backspace\u003c\/li\u003e\n\u003cli\u003e305 \/ 55 with 20 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOE Knuckle Type - Cast Aluminum\u003c\/strong\u003e\u003cbr\u003eFord is producing two knuckle\/control arm configurations in 2020+ model Rangers. Cast steel knuckle equipped models have different ball joints than models equipped with Aluminum knuckles. Be sure to verify which factory knuckle your truck has before ordering by referencing our help images when customizing your kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013350, 2019-2023 Ford Ranger Coilover 2.5 inch-3.5 inch Box kit, UPC Code 658848613311\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123614, 2019-2023 Ford Ranger Intrusion Beam Kit, UPC Code 711745604414\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224880, Fox 2.0 Shock 26.35 x 16.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98502133, 19-ON Ford Ranger, Front Coilover, PS, 2.0, Internal Floating Piston, 4.5 inch, 0-3 inch Lift, UPC Code 788000424551\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":44513722204226,"sku":"BDS1545FSL-BLDV","price":2782.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/BDS1545FSL-BLDV.jpg?v=1784951053"},{"product_id":"35-inch-lift-kit-fox-20-coil-over-ford-ranger-19-23-4wd-cast-steel-knuckle-fox-20-performance-shocks","title":"3.5 Inch Lift Kit FOX 2.0 Coil-Over Ford Ranger 19-23 4WD Cast Steel Knuckle Fox 2.0 Performance Shocks","description":"\u003cp\u003eTake your 2019-2023 Ford Ranger truck to the next level with a 3.5-inch lift kit with FOX 2.0 Coil-Over shocks from BDS. Specially designed for the new Ranger, this 3.5 inch leveling kit is engineered for additional Tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.\u003c\/p\u003e\n\u003cp\u003eTo ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.Р’В \u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit\n\u003c\/p\u003e\u003cli\u003eIncludes heavy duty lift shackles and custom-tuned matching FOX 2.0 Performance series shocks.Р’В \u003c\/li\u003e\n\n\n\u003cp\u003eFOX 2.0 Coil-Over Shocks\u003c\/p\u003e\n\u003cp\u003eThese FOX 2.0 Performance Series coil-overs bring impressive damper performance for great ride on and offroad capability designed as a direct bolt-in replacement for the factory strut. They feature a 2.0 inch extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (Internal Floating Piston) to eliminate oil aeration, FOX's proprietary internals, 5\/8 inch hard chrome plated heat treated alloy shaft and come preloaded with springs and top-plate for easy installation.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms (UCAs)\u003c\/p\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Strut Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Shackle\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eAftermarket wheels must have a minimum of 93.1mm center hub bore.\u003c\/li\u003e\n\u003cli\u003eTires larger than 285\/70r17 or 285\/65r18 cannot be installed on factory wheels due to steering knuckle clearance.\u003c\/li\u003e\n\u003cli\u003eWill NOT work on trucks equipped with cast steel steering knuckles\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX Performance Internal Floating Piston shocks eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving\u003c\/li\u003e\n\u003cli\u003eHD Upper control arms provide superior strength and proper alignment\u003c\/li\u003e\n\u003cli\u003eAdjustable height to fine tune\u003c\/li\u003e\n\u003cli\u003eProvides level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eEasy, 100 percent Bolt On installation\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOE Knuckle Type - Cast Steel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFord is producing two knuckle\/control arm configurations in 2020+ model Rangers. Cast steel knuckle equipped models have different ball joints than models equipped with Aluminum knuckles. Be sure to verify which factory knuckle your truck has before ordering by referencing our help images when customizing your kit.\u003c\/p\u003e\n\u003cp\u003eTire Size: 305 \/ 55 Wheel Diameter: 20 x 9 Back Spacing: 5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013354, 2020-2023 Ford Ranger Coilover 2.5 inch-3.5 inch Box kit - Steel OE Knuckle, UPC Code 711745611764\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123614, 2019-2023 Ford Ranger Intrusion Beam Kit, UPC Code 711745604414\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224880, Fox 2.0 Shock 26.35 x 16.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98502133, 19-ON Ford Ranger, Front Coilover, PS, 2.0, Internal Floating Piston, 4.5 inch, 0-3 inch Lift, UPC Code 788000424551\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":44513722236994,"sku":"BDS1906FSL-BLDV","price":2682.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/BDS1906FSL_0-BLDV.jpg?v=1784951055"},{"product_id":"35-inch-lift-kit-fox-25-coil-over-ford-ranger-19-23-4wd-cast-aluminum-fox-20-performance-elite-shocks","title":"3.5 Inch Lift Kit FOX 2.5 Coil-Over Ford Ranger 19-23 4WD Cast Aluminum Fox 2.0 Performance Elite Shocks","description":"\u003cp\u003eTake your 2019-2023 Ford Ranger truck to the next level with a 3.5-inch lift kit with FOX 2.5 Coil-Over shocks from BDS. These kits feature proprietary FOX 2.5 coil-over shocks designed specifically to bolt-on performance for increase travel and the ability to soak up the roughest terrain along with smooth on-road comfort. This kit includes everything necessary to set your Ford Ranger up right with clearance for up to 33 inch tires.\u003c\/p\u003e\n\u003cp\u003eTo ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit includes heavy duty lift shackles and custom-tuned matching FOX shocks.\u003c\/p\u003e\n\u003cp\u003eDSC Adjustment\u003cbr\u003eFOX 2.5 coil-overs are available standard with DSC (dual speed compression) adjustment to tune the high-speed and low-speed compression damping allowing for added control on-road with the ability to easily dial in more aggressive damping offroad. Tuning is a simple twist of the two clearly defined knobs with immediate feedback to dial it in for any terrain.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms (UCAs)\u003cbr\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 coil-over shocks designed specifically for increase travel and the ability to soak up the roughest terrain\u003c\/li\u003e\n\u003cli\u003eDSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs\u003c\/li\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(Trimming may be required)\u003c\/li\u003e\n\u003cli\u003e285 \/ 65 with 18 x 9 and 5.75 in. Backspace\u003c\/li\u003e\n\u003cli\u003e305 \/ 55 with 20 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOE Knuckle Type Ford is producing two knuckle\/control arm configurations in 2020+ model Rangers. Cast steel knuckle equipped models have different ball joints than models equipped with Aluminum knuckles.\u003c\/p\u003e\n\u003cp\u003eBe sure to verify which factory knuckle your truck has before ordering by referencing our help images when customizing your kit.\u003cbr\u003eRear Shock Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDSC - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Block\u003c\/li\u003e\n\u003cli\u003eShocks Included: No\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1.5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013350, 2019-2023 Ford Ranger Coilover 2.5 inch-3.5 inch Box kit, UPC Code 658848613311\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123614, 2019-2023 Ford Ranger Intrusion Beam Kit, UPC Code 711745604414\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88306156, KIT: 19-ON Ford Ranger, US Only, Front, 2.5 Truck Fox Performance Elite Series, R\/R, 4.05 inch, 2-3 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224880, Fox 2.0 Shock 26.35 x 16.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":44513722302530,"sku":"BDS1545FPE-BLDV","price":3904.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/BDS1545FPE_0-BLDV.jpg?v=1784951058"},{"product_id":"35-inch-lift-kit-fox-25-coil-over-ford-ranger-19-23-4wd-cast-steel-fox-25-performance-elite-shocks","title":"3.5 Inch Lift Kit FOX 2.5 Coil-Over Ford Ranger 19-23 4WD Cast Steel Fox 2.5 Performance Elite Shocks","description":"\u003cp\u003eTake your 2019-2023 Ford Ranger truck to the next level with a 3.5-inch lift kit with FOX 2.5 Coil-Over shocks from BDS. These kits feature proprietary FOX 2.5 coil-over shocks designed specifically to bolt-on performance for increase travel and the ability to soak up the roughest terrain along with smooth on-road comfort. This kit includes everything necessary to set your Ford Ranger up right with clearance for up to 33 inch tires.\u003c\/p\u003e\n\u003cp\u003eTo ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit includes heavy duty lift shackles and custom-tuned matching FOX shocks.\u003c\/p\u003e\n\u003cp\u003eDSC Adjustment\u003cbr\u003eFOX 2.5 coil-overs are available standard with DSC (dual speed compression) adjustment to tune the high-speed and low-speed compression damping allowing for added control on-road with the ability to easily dial in more aggressive damping offroad. Tuning is a simple twist of the two clearly defined knobs with immediate feedback to dial it in for any terrain.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms (UCAs)\u003cbr\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 coil-over shocks designed specifically for increase travel and the ability to soak up the roughest terrain\u003c\/li\u003e\n\u003cli\u003eDSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs\u003c\/li\u003e\n\u003cli\u003eHigh clearance crossmembers improve strength and offroad capability\u003c\/li\u003e\n\u003cli\u003eHeavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility\u003c\/li\u003e\n\u003cli\u003eTop mounted strut spacers to provide lift and install easily\u003c\/li\u003e\n\u003cli\u003eDifferential skid plate for improved offroad protection\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and u-bolts to lift and level the stance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(Trimming may be required)\u003c\/li\u003e\n\u003cli\u003e285 \/ 65 with 18 x 9 and 5.75 in. Backspace\u003c\/li\u003e\n\u003cli\u003e305 \/ 55 with 20 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOE Knuckle Type Ford is producing two knuckle\/control arm configurations in 2020+ model Rangers. Cast steel knuckle equipped models have different ball joints than models equipped with Aluminum knuckles.\u003c\/p\u003e\n\u003cp\u003eBe sure to verify which factory knuckle your truck has before ordering by referencing our help images when customizing your kit.\u003cbr\u003eRear Shock Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased off-road capabilities\u003c\/li\u003e\n\u003cli\u003eEasily adjust your shock for terrain, load and speed\u003c\/li\u003e\n\u003cli\u003e2.5-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eMassive 7\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eExternal reservoir design separates shock oil from the high-pressure nitrogen\u003c\/li\u003e\n\u003cli\u003eDSC - Dual Speed Compression Adjuster comes standard\u003c\/li\u003e\n\u003cli\u003eFully serviceable for a lifetime of use\u003c\/li\u003e\n\u003cli\u003e1-year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013354, 2020-2023 Ford Ranger Coilover 2.5 inch-3.5 inch Box kit - Steel OE Knuckle, UPC Code 711745611764\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS123614, 2019-2023 Ford Ranger Intrusion Beam Kit, UPC Code 711745604414\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88306156, KIT: 19-ON Ford Ranger, US Only, Front, 2.5 Truck Fox Performance Elite Series, R\/R, 4.05 inch, 2-3 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88326059, KIT: 19-ON Ford Ranger, US Only, Rear, 2.5 Truck Fox Performance Elite Series, P\/B, 9.55 inch, 0-1.5 inch Lift, Dual Speed Compression Adjust, UPC Code 711745603585\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":44513722368066,"sku":"BDS1910FPE-BLDV","price":5026.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/BDS1910FPE-BLDV.jpg?v=1784951060"},{"product_id":"35-inch-lift-kit-ford-ranger-19-23-4wd-cast-aluminum-knuckle-fox-20-performance-shocks","title":"3.5 Inch Lift Kit Ford Ranger 19-23 4WD Cast Aluminum Knuckle Fox 2.0 Performance Shocks","description":"\u003cp\u003eImprove the performance and style of your 2019-2023 Ford Ranger truck by installing this 3.5-inch lift kit from BDS. Specially designed for the new Ranger, this 3.5 inch leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.\u003c\/p\u003e\n\u003cp\u003eTo prevent maxing out ball joints or CV damage, BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer.\u003c\/p\u003e\n\u003cp\u003eTo further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit includes heavy duty lift shackles and custom-tuned NX2 Nitro or FOX Performance series shocks.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms (UCAs)\u003cbr\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasy, 100 percent Bolt-on installation\u003cbr\u003eMaintains factory like ride quality\u003cbr\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003cbr\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003cbr\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(Trimming may be required)\u003c\/li\u003e\n\u003cli\u003e285 \/ 65 with 18 x 9 and 5.75 in. Backspace\u003c\/li\u003e\n\u003cli\u003e305 \/ 55 with 20 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOE Knuckle Type - Cast Aluminum\u003c\/strong\u003e\u003cbr\u003eFord is producing two knuckle\/control arm configurations in 2020+ model Rangers. Cast steel knuckle equipped models have different ball joints than models equipped with Aluminum knuckles. Be sure to verify which factory knuckle your truck has before ordering by referencing our help images when customizing your kit.\u003c\/p\u003e\n\u003cp\u003eRear Shock Option\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Strut Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Shackle\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013351, 2019-2023 Ford Ranger 3.5 inch Box Kit, UPC Code 658848613328\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224880, Fox 2.0 Shock 26.35 x 16.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":44513722499138,"sku":"BDS1545FS-BLDV","price":1513.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/BDS1545FS_0-BLDV.jpg?v=1784951068"},{"product_id":"35-inch-lift-kit-ford-ranger-19-23-4wd-cast-aluminum-knuckle-nx2-nitro-shocks","title":"3.5 Inch Lift Kit Ford Ranger 19-23 4WD Cast Aluminum Knuckle NX2 Nitro Shocks","description":"\u003cp\u003eImprove the performance and style of your 2019-2023 Ford Ranger truck by installing this 3.5-inch lift kit from BDS. Specially designed for the new Ranger, this 3.5 inch leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.\u003c\/p\u003e\n\u003cp\u003eTo prevent maxing out ball joints or CV damage, BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer.\u003c\/p\u003e\n\u003cp\u003eTo further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit includes heavy duty lift shackles and custom-tuned NX2 Nitro or FOX Performance series shocks.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms (UCAs)\u003cbr\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasy, 100 percent Bolt-on installation\u003cbr\u003eMaintains factory like ride quality\u003cbr\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003cbr\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003cbr\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(Trimming may be required)\u003c\/li\u003e\n\u003cli\u003e285 \/ 65 with 18 x 9 and 5.75 in. Backspace\u003c\/li\u003e\n\u003cli\u003e305 \/ 55 with 20 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOE Knuckle Type - Cast Aluminum\u003c\/strong\u003e\u003cbr\u003eFord is producing two knuckle\/control arm configurations in 2020+ model Rangers. Cast steel knuckle equipped models have different ball joints than models equipped with Aluminum knuckles. Be sure to verify which factory knuckle your truck has before ordering by referencing our help images when customizing your kit.\u003c\/p\u003e\n\u003cp\u003eRear Shock Option\u003cbr\u003e\u003cstrong\u003eNX2 Nitro Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen-charged\u003c\/li\u003e\n\u003cli\u003eTwin-tube design\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eDual-welded ends for increased strength\u003c\/li\u003e\n\u003cli\u003e1-3\/8-inch high-flow piston\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating seals\u003c\/li\u003e\n\u003cli\u003eSilver powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013351, 2019-2023 Ford Ranger 3.5 inch Box Kit, UPC Code 658848613328\u003c\/li\u003e\n\u003cli\u003eIncludes two BDS85880, Shock- 25.95 x 15.40 x 2 - EB1\/EB1, UPC Code 711745609952\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":44513722531906,"sku":"BDS1545H-BLDV","price":1222.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/BDS1545H_0-BLDV.jpg?v=1784951070"},{"product_id":"35-inch-lift-kit-ford-ranger-19-23-4wd-cast-steel-fox-20-performance-shocks","title":"3.5 Inch Lift Kit Ford Ranger 19-23 4WD Cast Steel Fox 2.0 Performance Shocks","description":"\u003cp\u003eImprove the performance and style of your 2019-2023 Ford Ranger truck by installing this 3.5-inch lift kit from BDS. Specially designed for the new Ranger, this 3.5 inch leveling kit is engineered for additional Tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.\u003c\/p\u003e\n\u003cp\u003eTo prevent maxing out ball joints or CV damage, BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer.\u003c\/p\u003e\n\u003cp\u003eTo further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.Р’В \u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit\n\u003c\/p\u003e\u003cli\u003eIncludes heavy duty lift shackles and custom-tuned NX2 Nitro or FOX Performance series shocks.Р’В \u003c\/li\u003e\n\n\n\u003cp\u003eHD Upper Control Arms (UCAs)\u003c\/p\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability.\u003c\/p\u003e\n\u003cp\u003eArms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Strut Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Shackle\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eAftermarket wheels must have a minimum of 93.1mm center hub bore.\u003c\/li\u003e\n\u003cli\u003eTires larger than 285\/70r17 or 285\/65r18 cannot be installed on factory wheels due to steering knuckle clearance.\u003c\/li\u003e\n\u003cli\u003eWill NOT work on trucks equipped with cast steel steering knuckles\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100 percent Bolt-on installation\u003c\/li\u003e\n\u003cli\u003eMaintains factory like ride quality\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOE Knuckle Type\u003c\/p\u003e\n\u003cp\u003eFord is producing two knuckle\/control arm configurations in 2020+ model Rangers. Cast steel knuckle equipped models have different ball joints than models equipped with Aluminum knuckles. Be sure to verify which factory knuckle your truck has before ordering by referencing our help images when customizing your kit.\u003c\/p\u003e\n\u003cp\u003eTire Size: 305 \/ 55 Wheel Diameter: 20 x 9 Back Spacing: 5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOX 2.0 Performance Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013353, 2020-2023 Ford Ranger 3.5 inch Box Kit - Steel OE Knuckle, UPC Code 711745611757\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224880, Fox 2.0 Shock 26.35 x 16.75 x 2- EB1\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":44513722564674,"sku":"BDS1906FS-BLDV","price":1459.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/BDS1906FS_0-BLDV.jpg?v=1784951072"},{"product_id":"35-inch-lift-kit-ford-ranger-19-23-4wd-cast-steel-nx2-nitro-shocks","title":"3.5 Inch Lift Kit Ford Ranger 19-23 4WD Cast Steel NX2 Nitro Shocks","description":"\u003cp\u003eImprove the performance and style of your 2019-2023 Ford Ranger truck by installing this 3.5-inch lift kit from BDS. Specially designed for the new Ranger, this 3.5 inch leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.\u003c\/p\u003e\n\u003cp\u003eTo prevent maxing out ball joints or CV damage, BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer.\u003c\/p\u003e\n\u003cp\u003eTo further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.\u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit includes heavy duty lift shackles and custom-tuned NX2 Nitro or FOX Performance series shocks.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms (UCAs)\u003cbr\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasy, 100 percent Bolt-on installation\u003cbr\u003eMaintains factory like ride quality\u003cbr\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003cbr\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003cbr\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(Trimming may be required)\u003c\/li\u003e\n\u003cli\u003e285 \/ 65 with 18 x 9 and 5.75 in. Backspace\u003c\/li\u003e\n\u003cli\u003e305 \/ 55 with 20 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOE Knuckle Type - Cast Steel\u003c\/strong\u003e\u003cbr\u003eFord is producing two knuckle\/control arm configurations in 2020+ model Rangers. Cast steel knuckle equipped models have different ball joints than models equipped with Aluminum knuckles.\u003c\/p\u003e\n\u003cp\u003eBe sure to verify which factory knuckle your truck has before ordering by referencing our help images when customizing your kit.\u003c\/p\u003e\n\u003cp\u003eRear Shock Option\u003cbr\u003e\u003cstrong\u003eNX2 Nitro Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen-charged\u003c\/li\u003e\n\u003cli\u003eTwin-tube design\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eDual-welded ends for increased strength\u003c\/li\u003e\n\u003cli\u003e1-3\/8-inch high-flow piston\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating seals\u003c\/li\u003e\n\u003cli\u003eSilver powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Strut Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Shackle\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS013353, 2020-2023 Ford Ranger 3.5 inch Box Kit - Steel OE Knuckle, UPC Code 711745611757\u003c\/li\u003e\n\u003cli\u003eIncludes two BDS85880, Shock- 25.95 x 15.40 x 2 - EB1\/EB1, UPC Code 711745609952\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":44513722597442,"sku":"BDS1906H-BLDV","price":1168.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/BDS1906H_0-BLDV.jpg?v=1784951075"}],"url":"https:\/\/www.skinnypedalracing.com\/collections\/ranger-bds-3-5-suspension-lift.oembed","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}