{"title":"Motobilt GM 14 Bolt Differential Cover","description":"\u003cp\u003eMotobilt GM 14 bolt differential covers.\u003c\/p\u003e","products":[{"product_id":"motobilt-diy-14-bolt-diff-cover-mb4012-diy","title":"Motobilt DIY 14 Bolt Diff Cover MB4012-DIY","description":"\u003cp\u003e\u003cstrong\u003eMotobilt DIY 14 Bolt Diff Cover MB4012-DIY\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB4012-DIY\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you can weld and want to build your own diff cover, purchase the 14 Bolt DIY DIFF Cover. Motobilt DIY Diff Covers are the same as our fully-welded diff covers,but sold as a kit including the pre-formed pieces and hardware you will need to complete the DIY project yourself. We have included assembly instructions as well.\u003c\/p\u003e\n\u003cp\u003eWhy change out your diff cover? We do get asked this question on occasion. The factory diff covers are too thin for abuse on the trail. One of the common factory diff cover failures occurs when the edge gets peeled up from a rock sliding across the diff. Peeling can cause the differential fluid to leak out unknowingly and the result could be damaging the gears when you hit the road to drive home.\u003c\/p\u003e\n\u003cp\u003eAnother failure of factory diff covers are from bending the cover into the ring gear which rubs a hole through. The result here is the same with differential fluid leaking out. One other failure is actually puncturing the factory diff cover with a sharp rock. Again resulting in differential fluid leaking out.\u003c\/p\u003e\n\u003cp\u003eHopefully this explains the need for a heavy duty diff cover. The Motobilt Heavy Duty Fabricated Diff Covers address the failures I have mentioned to ensure your ring and pinion gear sets are well protected. \u003c\/p\u003e\n\u003cp\u003eAll Motobilt Diff Covers include a Lifetime Warrranty from trail damage and manufacture defect. We cannot warranty DIY Diff Covers being welded incorrectly.\u003c\/p\u003e\n\u003cp\u003eSimplyweld it together and bolt it onto your axle. Simply weld it together and bolt it onto your axle. As with all Motobilt DIY parts, we recommend having an experienced welder handle the welding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e We strongly recommend tacking the pieces together and test fitting it onto the axle before finish welding. We also recommend using pipe thread tape for the fill plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIY Diff Cover Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e14 Bolt Diff Cover\u003c\/li\u003e\n\u003cli\u003e1\/4 inch thick steel plate design\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick steel ring\u003c\/li\u003e\n\u003cli\u003e3\/4 inch NPT fill plug\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDIY Diff Cover Kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-cut 3\/8 inch Ring\u003c\/li\u003e\n\u003cli\u003eCNC-formed 1\/4 inch thick shell\u003c\/li\u003e\n\u003cli\u003eOil fill weld-in bung and oil fill plug\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips bare steel and will needed to be painted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e9\/16 allen head - For the fill plug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eDifferential: 14 Bolt\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB4012-DIY\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 12 x 12 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375049826370,"sku":"MB4012-DIY","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB4012-DIY-HJQL.png?v=1791253998"},{"product_id":"motobilt-diy-13-bolt-diff-cover-mb4067-diy","title":"Motobilt DIY 13 Bolt Diff Cover MB4067-DIY","description":"\u003cp\u003e\u003cstrong\u003eMotobilt DIY 13 Bolt Diff Cover MB4067-DIY\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB4067-DIY\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you can weld and want to build your own diff cover, purchase the13 Bolt DIY DIFF Cover. Motobilt DIY Diff Covers are the same as our fully-welded diff covers, but sold as a kit including the pre-formed pieces and hardware you will need tocomplete the DIY project yourself. We have included assembly instructions as well.\u003c\/p\u003e\n\u003cp\u003eWhy change out your diff cover? We do get asked this question on occasion. The factory diff covers are too thin for abuse on the trail. One of the common factory diff cover failures occurs when the edge gets peeled up from a rock sliding across the diff. Peeling can cause the differential fluid to leak out unknowingly and the result could be damaging the gears when you hit the road to drive home.\u003c\/p\u003e\n\u003cp\u003eAnother failure of factory diff covers are from bending the cover into the ring gear which rubs a hole through. The result here is the same with differential fluid leaking out. One other failure is actually puncturing the factory diff cover with a sharp rock. Again resulting in differential fluid leaking out.\u003c\/p\u003e\n\u003cp\u003eHopefully this explains the need for a heavy duty diff cover. The Motobilt Heavy Duty Fabricated Diff Covers address the failures I have mentioned to ensure your ring and pinion gear sets are well protected.\u003c\/p\u003e\n\u003cp\u003eAll Motobilt Diff Covers include a Lifetime Warrranty from trail damage and manufacture defect. We cannot warranty DIY Diff Covers being welded incorrectly.\u003c\/p\u003e\n\u003cp\u003eAs with all Motobilt DIY builder parts, an experienced welder is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003eWe strongly recommend tacking the pieces together and test fitting it onto the axle before finish welding. We also recommend using pipe thread tape for the fill plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIY Diff Cover Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e13 bolt diff cover\u003c\/li\u003e\n\u003cli\u003eStandard 3\/8 inch non ribbed housing bolts\u003c\/li\u003e\n\u003cli\u003eMetric bolts for ribbed housings\u003c\/li\u003e\n\u003cli\u003e1\/4 inch thick steel plate shell\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick steel diff ring\u003c\/li\u003e\n\u003cli\u003eIn-house laser and CNC press brake\u003c\/li\u003e\n\u003cli\u003eSold askit\u003c\/li\u003e\n\u003cli\u003eAll parts are shipped bare metal and will need to be painted before install\u003c\/li\u003e\n\u003cli\u003eLifetime Warrranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDIY Diff Cover Kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-cut 3\/8 inch Ring\u003c\/li\u003e\n\u003cli\u003eCNC-formed 1\/4 inch thick shell\u003c\/li\u003e\n\u003cli\u003eOil fill weld-in bung and oil fill plug\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e9\/16 allen head - For the fill plug.\u003c\/li\u003e\n\u003cli\u003e12 point 3\/8 socket or 8mm socket depending on ribbed or non ribbed housing and ratchet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eDifferential: 13 Bolt\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB4067-DIY\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 12 x 12 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375050154050,"sku":"MB4067-DIY","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB4067-DIY-HJQL.jpg?v=1791254001"},{"product_id":"motobilt-14-bolt-rear-diff-cover-for-ecgs-and-fusion-4x4-axles-mb4116","title":"Motobilt 14 Bolt Rear Diff Cover for ECGS and Fusion 4x4 Axles MB4116","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 14 Bolt Rear Diff Cover for ECGS and Fusion 4x4 Axles MB4116\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB4116\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eElevate your off-road experience with our 14 Bolt Rear Diff Cover, meticulously engineered to fit the East Coast Gear Supply and Fusion Axle cast 14 bolt rear axle. Designed for those who demand both durability and precision, this diff cover is your ideal upgrade for challenging terrains.\u003c\/p\u003e\n\u003cp\u003eThis HD steel diff cover features a 3\/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks.\u003c\/p\u003e\n\u003cp\u003eTh HD steel diff cover is welded both on the inside and outside of the cover to ensure maximum penetration for superior strength. The Motobilt steel diff cover's design comes from over 14 years of differential cover testing and manufacturing experience. This diff cover ships bare steel and will need to be painted.\u003c\/p\u003e\n\u003cp\u003eWe do not usually powder coat ours because the diff cover is going to take abuse from rocks. We recommend painting with spray paint to make touch it up easy. The standard 3\/8 inch bolts and fill plug ship with the cover.\u003c\/p\u003e\n\u003cp\u003eWith dimensions of 12.28 inch x 12.97 inch x 3.5 inch, this diff cover is crafted to provide an exact fit and optimal protection. Its robust design, weighing 13 lbs, guarantees an unyielding shield against debris and impacts, safeguarding your axle's integral components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEast Coast Gear Supply\/Fusion Axle Cast 14 Bolt Rear Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCustom fit for East Coast Gear Supply\/Fusion Axle Cast 14 Bolt Rear Axle\u003c\/li\u003e\n\u003cli\u003eMade in the USA, ensuring quality and durability\u003c\/li\u003e\n\u003cli\u003e1\/4 inch thick steel plate design\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick steel ring\u003c\/li\u003e\n\u003cli\u003e3\/4 inch NPT fill plug\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eShips bare steel and will need to be painted\u003c\/li\u003e\n\u003cli\u003eDimensions: 12.28 inch (H) x 12.97 inch (W) x 3.5 inch (D)\u003c\/li\u003e\n\u003cli\u003eWeight: 13 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Raw\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB4116\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 13 x 14 x 5 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 13 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/GkcBRJsFZLU?si=AGMd4FpwkPv3wn3U\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375381405762,"sku":"MB4116","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB4116_0-HJQL.jpg?v=1791254527"},{"product_id":"motobilt-13-bolt-diff-cover-mb4067","title":"Motobilt 13 Bolt Diff Cover MB4067","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 13 Bolt Diff Cover MB4067\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB4067\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt 13 bolt diff cover allows for an extra 1.25 inches of ground clearance on your GM 14 bolt rear axle. This is often referred to as a shaved cover as you cut\/shave 1.25 inches off of the bottom of the axle. The ring of this cover is laser cut from 3\/8 inch thick steel plate and the shell is formed from 1\/4 inch steel plate with our in-house laser and CNC press brake.\u003c\/p\u003e\n\u003cp\u003eThere is no need to shave your ring gear or weld anything to your axle. This cover is backed by our lifetime guarantee also. The cover comes with a large 3\/4 inch hole with fill plug and all the necessary hardware. All parts are shipped bare metal and will need to be painted after installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e13 bolt diff cover\u003c\/li\u003e\n\u003cli\u003eStandard 3\/8 inch non-ribbed housing bolts\u003c\/li\u003e\n\u003cli\u003eMetric bolts for ribbed housings\u003c\/li\u003e\n\u003cli\u003e1\/4 inch steel plate\u003c\/li\u003e\n\u003cli\u003eInhouse laser and CNC press brake\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003cli\u003eAll parts are shipped bare metal and will need to be painted after install\u003c\/li\u003e\n\u003cli\u003eWeight: 12lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e9\/16 Allen head - For the fill plug.\u003c\/li\u003e\n\u003cli\u003e12 point 3\/8 socket or 8mm socket depending on ribbed or non-ribbed housing and ratchet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eDifferential: 13 Bolt\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB4067\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 9 x 9 x 7 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375628542018,"sku":"MB4067","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB4067-HJQL.jpg?v=1791254908"},{"product_id":"motobilt-14-bolt-diff-cover-mb4012","title":"Motobilt 14 Bolt Diff Cover MB4012","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 14 Bolt Diff Cover MB4012\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB4012\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt 14 Bolt Diff Cover was designed with function in mind. The cover is made from high-strength steel plate and fully welded. The Motobilt GM 14 bolt full float heavy-duty steel diff cover has many features that separate it from others. This full-float HD steel diff cover features a 3\/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks.\u003c\/p\u003e\n\u003cp\u003eThe GM 14 bolt full float HD steel diff cover also features the proven 1\/4 inch thick steel plate design with an integrated 3\/4 inch NPT fill plug. The fill plug on the GM 14 bolt full float HD steel diff cover allows for easy access, especially when a truss system is commonly used.\u003c\/p\u003e\n\u003cp\u003eThe GM 14 bolt full float HD steel diff cover is welded both on the inside and outside of the cover to ensure maximum penetration for superior strength. The Motobilt GM 14 bolt full float HD steel diff cover's design comes from over 14 years of differential cover testing and manufacturing experience. This diff cover ships bare steel and will need to be painted. We do not usually powder coat ours because the diff cover is going to take abuse from rocks. We recommend painting with spray paint to make touch it up easy. The standard 3\/8 inch bolts and fill plug ship with the cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e14 Bolt Differential Cover\u003c\/li\u003e\n\u003cli\u003e1\/4 inch thick steel plate design\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick steel ring\u003c\/li\u003e\n\u003cli\u003e3\/4 inch NPT fill plug\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eShips bare steel and will need to be painted\u003c\/li\u003e\n\u003cli\u003eWeight: 14lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e9\/16 allen head - For the fill plug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eDifferential: 14 Bolt\u003c\/li\u003e\n\u003cli\u003eHardware included: No\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB4012\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 9 x 9 x 7 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375628640322,"sku":"MB4012","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB4012-HJQL.jpg?v=1791254910"},{"product_id":"motobilt-14-bolt-semi-float-rear-diff-cover-mb4114","title":"Motobilt 14 Bolt Semi-Float Rear Diff Cover MB4114","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 14 Bolt Semi-Float Rear Diff Cover MB4114\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB4114\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eUpgrade your off-road beast with the Motobilt 14 Bolt Semi Float HD Steel Diff Cover. This isn't your average diff cover - it's packed with features that set it apart from the rest.\u003c\/p\u003e\n\u003cp\u003eConstructed with a hefty 3\/8 inch thick steel ring, this diff cover won't back down when faced with rocks and rough terrain. No need to worry about it pulling away from the housing during intense off-roading sessions. We've also incorporated our tried-and-true 1\/4 inch thick steel plate design, complete with a conveniently integrated 3\/4 inch NPT fill plug. Easy access is key, especially when paired with a truss system.\u003c\/p\u003e\n\u003cp\u003eStrength is our top priority, which is why the 14 Bolt Semi Float HD Steel Diff Cover is meticulously welded both inside and out. This ensures maximum penetration and superior durability, built to withstand anything the trail throws at you. With over 20 years of differential cover testing and manufacturing experience behind its design, you can trust its performance.\u003c\/p\u003e\n\u003cp\u003ePlease note that the diff cover ships bare steel for a reason - it's meant to take abuse from rocks. We recommend applying a coat of spray paint to protect it and easily touch up any scratches along the way. Don't worry, we've got you covered - the bolts and fill plug are included with your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e14 Bolt Semi Float diff cover\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick steel ring\u003c\/li\u003e\n\u003cli\u003e1\/4 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003eIntegrated 3\/4 inch NPT fill plug\u003c\/li\u003e\n\u003cli\u003eBacked by our Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips bare steel and will need to be painted\u003c\/li\u003e\n\u003cli\u003eTools needed: 9\/16 Allen head for the fill plug, 12 point 5\/16 socket, and ratchet for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your rig's strength and protection with the Motobilt 14 Bolt Semi Float HD Steel Diff Cover. Conquer the trails with confidence, knowing your differential is equipped for the roughest adventures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to tell if you have a semi-float 14 bolt.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1. The differential cover has 14 bolts\u003c\/li\u003e\n\u003cli\u003e2. The end of the axle ends at the wheel and does not protrude past the wheel mounting surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB4114\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 6 x 3 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375628804162,"sku":"MB4114","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB4114-HJQL.jpg?v=1791254915"},{"product_id":"motobilt-14-bolt-differential-cover-3-8-non-ribbed-housing-mb4012-s","title":"Motobilt 14 Bolt Differential Cover 3\/8\" Non Ribbed Housing MB4012-S","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 14 Bolt Differential Cover 3\/8\" Non Ribbed Housing MB4012-S\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB4012-S\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt 14 Bolt Diff Cover was designed with function in mind. The cover is made from high strength steel plate and full welded. The Motobilt GM 14 bolt full float heavy duty steel diff cover has many features that separate it from others. The GM 14 bolt full float HD steel diff cover features a 3\/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The GM 14 bolt full float HD steel diff cover also features the proven 1\/4 inch thick steel plate design with an integrated 3\/4 inch NPT fill plug. The fill plug on the GM 14 bolt full float HD steel diff cover allows for easy access, especially when a truss system is commonly used.\u003c\/p\u003e\n\u003cp\u003eThe GM 14 bolt full float HD steel diff cover is welded both on the inside and outside of the cover to ensure maximum penetration for superior strength. The Motobilt GM 14 bolt full float HD steel diff cover's design comes from over 14 years of diff cover testing and manufacturing experience.The diff cover ships bare steel and will need to be painted. We do not usually powdercoat ours because the diff cover is going to take abuse from rocks. Spray paint works well so you can simply touch it up. The standard 3\/8 inch bolts and fill plug ship with the cover.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e14 Bolt Diff Cover\u003c\/li\u003e\n\u003cli\u003eStandard 3\/8 inch non ribbed housing\u003c\/li\u003e\n\u003cli\u003e1\/4 inch thick steel plate design\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick steel ring\u003c\/li\u003e\n\u003cli\u003e3\/4 inch NPT fill plug\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips bare steel and will needed to be painted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eDifferential: GM 10.5 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB4012-S\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 14 x 14 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 15 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/6ld0nbbA_TE\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375892193346,"sku":"MB4012-S","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB4012-S-HJQL.jpg?v=1791255151"}],"url":"https:\/\/www.skinnypedalracing.com\/collections\/motobilt-gm-14-bolt-differential-cover.oembed","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}