{"title":"Jeep Chassis and Suspension Brackets","description":"\u003cp\u003eChassis and suspension parts for the Jeep Wrangler and Gladiator, including 4 link bracket kits, frame back half kits, crossmembers, control arm mounts, shock towers, spring hangers, axle conversion and wheelbase stretch kits.\u003c\/p\u003e","products":[{"product_id":"motobilt-wheelbase-stretch-kit-for-jeep-yj-mb1500","title":"Motobilt Wheelbase Stretch Kit for Jeep YJ MB1500","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Wheelbase Stretch Kit for Jeep YJ MB1500\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1500\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep Wrangler YJ Wheelbase Stretch Kit is a great way to move your rear axle back roughly 6 inches. The Motobilt Jeep Wrangler Wheelbase Stretch Kit is designed to use Jeep XJ rear leaf springs on the rear of your Jeep YJ (1987-1995). Installing this kit moves the rear axle back about 6 inches. The kit incorporates a custom rear bumper and shackle hangers in one part. The shackle hangers are positioned high on the bumper to keep the overall Jeep ride height lower for better center of gravity. The ends of the bumper are tapered in to allow better clearance for the shackles with the rear axle at full droop.\u003c\/p\u003e\n\u003cp\u003eThe kit comes with a custom set of leaf spring shackles designed to clear the bumper in the range of movement. The rear bumper also features 3\/4 inch thick d-ring recovery mounts that pass through the bumper and welded on both sides. The bumper welds to the back of the factory cross member and has two side frame plates to cover the sides. This kit does include new spring shackles as noted. The shackles are CNC laser cut from 1\/4 inch high strength steel plate. The shackles measure 4 inches center to center and do have a 3rd cross bolt for additional support.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler YJ Wheelbase Stretch Kit\u003c\/li\u003e\n\u003cli\u003e1987-1995 Jeep Wrangler YJ\u003c\/li\u003e\n\u003cli\u003eThe bumper is 3\/16 inch laser cut steel plate\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick d-ring mounts\u003c\/li\u003e\n\u003cli\u003eIncorporated shackle mounts\u003c\/li\u003e\n\u003cli\u003eMoves the axle back 6 inches\u003c\/li\u003e\n\u003cli\u003eMeasures 42.5 inch wide\u003c\/li\u003e\n\u003cli\u003eIncludes new shackles and shackle spacer\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePurchase PN BushingKit if you require the shackle bushing kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1500\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 48 x 6 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 29 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/uNZR8sdOzRk\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45373970055234,"sku":"MB1500","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1500-HJQL.jpg?v=1791252781"},{"product_id":"motobilt-4-link-suspension-mount-kit-with-skid-for-jeep-tj-mb1517","title":"Motobilt 4 Link Suspension Mount Kit with Skid for Jeep TJ MB1517","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 4 Link Suspension Mount Kit with Skid for Jeep TJ MB1517\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1517\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis is the new 4 link assembly for the frame side on a Jeep TJ. Building high quality fabricated products for offroad vehicles is the mission. The Motobilt Jeep TJ Four Link Suspension Kit consists of an assembly that mounts onto the frame and houses both the upper and lower links for the front and rear 4 link suspension. This kit was designed to make it easier to install 4 linked suspension by taking out the guess work.\u003c\/p\u003e\n\u003cp\u003eThe kit is fabricated from high strength CNC laser cut steel plate. The main bodies where the links bolt in and the skid are all 1\/4 inch steel plate for ultimate strength. Some of the secondary plates to box in the link mounts and internal gusseting are 3\/16 inch steel plate. The design comes to you fully welded and ready to install into the Jeep. Once receiving the kit you will be required to weld the parts in place. The parts are located very easily with the factory skid plate mounting holes.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ Four Link Suspension Kit\u003c\/li\u003e\n\u003cli\u003eMain bodies 1\/4 inch steel plate\u003c\/li\u003e\n\u003cli\u003eSecondary plates 3\/16 inch steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequired welding the parts in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front\/Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1517\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eShips in 2 boxes, 126 lb total\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45373997383746,"sku":"MB1517","price":1469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1517-HJQL.jpg?v=1791252880"},{"product_id":"motobilt-4-link-suspension-mount-kit-with-skid-for-jeep-yj-mb1503","title":"Motobilt 4 Link Suspension Mount Kit with Skid for Jeep YJ MB1503","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 4 Link Suspension Mount Kit with Skid for Jeep YJ MB1503\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1503\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eBuilding high quality fabricated products for offroad vehicles is the mission. The Motobilt Jeep YJ Four Link Suspension Kit consists of an assembly that mounts ot the frame and houses both the upper and lower links for the front and rear 4 link suspension. This kit was designed to make it easier to install 4 linked suspension by taking out the guess work. The kit is fabricated from high strength CNC laser cut steel plate. The main bodies where the links bolt in and the skid are all 1\/4 inch steel plate for ultimate strength.\u003c\/p\u003e\n\u003cp\u003eSome of the secondary plates to box in the link mounts and internal gusseting are 3\/16 inch steel plate. The design comes to you fully welded and ready to install into the Jeep. Once receiving the kit you will be required to weld the parts in place. The parts are located very easily with the factory skid plate mounting holes. This kit was used in this build.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ Four Link assembly suspension kit\u003c\/li\u003e\n\u003cli\u003eFabricated from high strength CNC laser cut steel plate\u003c\/li\u003e\n\u003cli\u003eThe main bodies where the links bolt in and the skid are all 1\/4 inch steel plate for ultimate strength\u003c\/li\u003e\n\u003cli\u003eSecondary plates to box in the link mounts and internal gusseting are 3\/16 inch steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front\/Rear\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1503\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eShips in 2 boxes, 126 lb total\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/is-F36xI73I\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45373997482050,"sku":"MB1503","price":1469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1503-HJQL.jpg?v=1791252883"},{"product_id":"motobilt-wheelbase-stretch-kit-for-jeep-cj-mb1519","title":"Motobilt Wheelbase Stretch Kit for Jeep CJ MB1519","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Wheelbase Stretch Kit for Jeep CJ MB1519\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1519\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep CJ Wheelbase Stretch Kit is designed to use Jeep XJ rear leaf springs on the rear of your Jeep CJ (1976-1986). Installing this kit moves the rear axle back about 6 inches. The kit incorporates a custom rear bumper and shackle hangers in one part. The shackle hangers are positioned high on the bumper to keep the overall Jeep ride height lower for better center of gravity. The ends of the bumper are tapered in to allow better clearance for the shackles with the rear axle at full drop.\u003c\/p\u003e\n\u003cp\u003eThe kit comes with a custom set of leaf spring shackles designed to clear the bumper in the range of movement. The rear bumper also features 3\/4 inch thick d-ring recovery mounts that pass through the bumper and welded on both sides. The bumper welds to the back of the factory cross member and has two side frame plates to cover the sides. This kit does include new spring shackles as noted. The shackles are CNC laser cut from 1\/4 inch high strength steel plate.\u003c\/p\u003e\n\u003cp\u003eThe shackles measure 4 inches center to center and do have a 3rd cross bolt for additional support. The kit does not include poly bushings. The kit does require removing the factory gas tank. Many people install an aftermarket fuel cell.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep CJ Wheelbase Stretch Kit\u003c\/li\u003e\n\u003cli\u003eFit 1976-1986 Jeep CJ\u003c\/li\u003e\n\u003cli\u003eThe bumper is 3\/16 inch laser cut steel plate\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick d-ring mounts\u003c\/li\u003e\n\u003cli\u003eIncorporated shackle mounts\u003c\/li\u003e\n\u003cli\u003eMoves the axle back 6 inches\u003c\/li\u003e\n\u003cli\u003eMeasures 38 inch wide\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardware kit sold separately\u003c\/li\u003e\n\u003cli\u003eShackle bushing kit sold separately PN BushingKit\u003c\/li\u003e\n\u003cli\u003eIncludes new shackles and shackle spacers\u003c\/li\u003e\n\u003cli\u003eThe kit does require removing the factory gas tank\u003c\/li\u003e\n\u003cli\u003eMany people install an aftermarket fuel cell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1519\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 48 x 6 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 27 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45373997580354,"sku":"MB1519","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1519-HJQL.jpg?v=1791252886"},{"product_id":"motobilt-jeep-spring-over-perch-offset-mb4002","title":"Motobilt Jeep Spring Over Perch Offset MB4002","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Jeep Spring Over Perch Offset MB4002\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB4002\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep spring over offset perch was designed to work with an axle tube diameter of 2.5 inch. These are commonly used on Jeep Dana 30 front axles in a spring over application. They can be used in other applications also such as a Jeep CJ dana 30. Remember if you use these on a Jeep CJ you will need to run the wider 2.5 inch wide leaf springs.\u003c\/p\u003e\n\u003cp\u003eThe laser cut steel perch is built to work with 2.5 inch wide springs and has 3 center pin holes for adjustability. The perch is offset on one side so that when mounteD it can mount up close to the differential housing. This allows you to perform a spring over on your Jeep YJ factory front axle. If you attempted to use a standard perch your springs would end up un even and put your suspension in a bind. These perches are made out of 1\/4 inch thick steel plate that is laser cut, CNC bent, and then welded for the ultimate in strength.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Off set spring perches\u003c\/li\u003e\n\u003cli\u003eLaser cut 1\/4 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003eWorks with 2.5 inch wide springs and has 3 center pin holes\u003c\/li\u003e\n\u003cli\u003eDesigned to work with an axle tube diameter of 2.5 inch\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf using these on a Jeep CJ you will need to run the wider 2.5 inch wide leaf springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eDifferential: Dana 30\u003c\/li\u003e\n\u003cli\u003eAxle tube: 2.5 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB4002\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 10 x 8 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 6 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45373997940802,"sku":"MB4002","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB4002-HJQL.jpg?v=1791252898"},{"product_id":"motobilt-rear-spring-hanger-mounts-for-jeep-yj-mb1531","title":"Motobilt Rear Spring Hanger Mounts for Jeep YJ MB1531","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Rear Spring Hanger Mounts for Jeep YJ MB1531\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1531\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt frame mount spring hangers are a great way to move your spring mounts on your frame. They are designed to fit around your factory frame rails and weld in place. These mounts can be used to replace factory mounts or to relocate your leaf springs. They are 2.5 inch wide at the mounting location of the frame rails and the width where the leaf spring mounts is 3 inch. This is the typical measurement of a Jeep YJ rear leaf spring with bushings installed.\u003c\/p\u003e\n\u003cp\u003eThese mounts work very well with our Motobilt Jeep YJ stretch kit if you want to re use your factory Jeep YJ leaf springs. You would need to cut your old mounts off clean with the frame. The new mounts would then be positioned and welded in place. These mounts are cut in house at Motobilt by laser from 1\/4 inch thick high strength steel plate. The kit includes enough pieces to do a Pair of leaf spring mounts. They do Not come welded. We recommend that you have these welded by a professional.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ Rear Spring Hanger Mounts\u003c\/li\u003e\n\u003cli\u003eLaser from 1\/4 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eFrame rails mounting location width 2.5 inch\u003c\/li\u003e\n\u003cli\u003eLeaf spring mounts 3 inch\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounts are available in 2 forms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe first one has the leaf spring mounting hole in the stock height position. i.e. no change in height\u003c\/li\u003e\n\u003cli\u003eThe second version has the spring mounting hole 1 inch higher so it will lower your height by 1 inch in height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese mounts work very well with our Motobilt Jeep YJ stretch kit if you want to re use your factory Jeep YJ leaf springs. You would need to cut your old mounts off clean with the frame. The new mounts would then be positioned and welded in place\u003c\/li\u003e\n\u003cli\u003eRequires welding\u003c\/li\u003e\n\u003cli\u003eWe recommend that you have these welded by a professional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1531\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 10 x 8 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 20 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45373998235714,"sku":"MB1531","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1531-HJQL.jpg?v=1791252900"},{"product_id":"motobilt-steel-front-shock-towers-for-1987-1995-jeep-yj-mb1532","title":"Motobilt Steel Front Shock Towers for 1987-1995 Jeep YJ MB1532","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Steel Front Shock Towers for 1987-1995 Jeep YJ MB1532\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1532\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep YJ front shock towers are laser cut from 3\/16 inch steel plate and cnc bent in house at Motobilt. These are 100 percent made in America. The Motobilt towers are meant to replace the stock shock buckets on your 1987-1995 Jeep Wrangler YJ. The towers come as a pair.\u003c\/p\u003e\n\u003cp\u003eThey are bare steel and will require you to weld the mounting tabs and seams together. Also your factory towers will need to be removed completely to make room for the new Motobilt towers. The Motobilt Jeep YJ shock towers allow you to run a standard eyelet upper shock end with a 1\/2 inch hole instead of the factory stem style.\u003c\/p\u003e\n\u003cp\u003eThis new style is much stronger. They measure approximately 9.5 inch from the top of the frame to the center of the shock eyelet. This allows for a shock that is 2.5 inch longer then the factory.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShock towers\u003c\/li\u003e\n\u003cli\u003eFits 1987-1995 Jeep Wrangler YJ\u003c\/li\u003e\n\u003cli\u003eLaser cut 3\/16 inch steel plate\u003c\/li\u003e\n\u003cli\u003eCan be used with stock width axles or full width axles\u003c\/li\u003e\n\u003cli\u003eDesigned for standard style shocks and Not coil overs\u003c\/li\u003e\n\u003cli\u003eMeasure approximately 9.5 inch from the top of the frame to the center of the shock eyelet\u003c\/li\u003e\n\u003cli\u003eIncludes 2 tower assemblies and 4 shock mounting tabs\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese towers do Not come welded\u003c\/li\u003e\n\u003cli\u003eThese towers are Not meant to be used with coilovers\u003c\/li\u003e\n\u003cli\u003eTowers for coil overs are PN MB1516\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1532\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 16 x 8 x 4 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 18 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45373999022146,"sku":"MB1532","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1532-HJQL.jpg?v=1791252908"},{"product_id":"motobilt-front-shackle-hangers-1-5-x-250-for-jeep-yj-mb1533","title":"Motobilt Front Shackle Hangers 1.5 x .250\" for Jeep YJ MB1533","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Front Shackle Hangers 1.5 x .250\" for Jeep YJ MB1533\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1533\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep YJ front shackle hanger kit was designed to specifically clear the lower bolt on your front bumper. All other companies use a universal kit and it will not clear the factory front bumper. When it comes to the Jeep Wrangler YJ we consider ourselves experts and look for ways to improve on even the simpliesst of items.\u003c\/p\u003e\n\u003cp\u003eThe Jeep Wrangler YJ front shackle hanger kit is 100 percent American made. We laser cut, CNC form, and weld these kits in house at Motobilt. The shackle hanger kit is made from 3\/16 inch thick steel plate and the round tube is 1.5 inch x .250 inch wall DOM tubing that has been machined down for a smooth mounting surface. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ front shackle hanger kit\u003c\/li\u003e\n\u003cli\u003e3\/16 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003eRound tube is 1.5 inch x .250 inch wall DOM tubing\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips raw steel\u003c\/li\u003e\n\u003cli\u003eThese are Not welded\u003c\/li\u003e\n\u003cli\u003ePurchase PN Bushingkit if bushings are needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eTube size: 1.5 Inch x .250 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1533\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 6 x 6 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 10 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374175019074,"sku":"MB1533","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1533-HJQL.jpg?v=1791253104"},{"product_id":"motobilt-rear-cross-member-for-1976-1986-jeep-cj-mb3004","title":"Motobilt Rear Cross Member for 1976-1986 Jeep CJ MB3004","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Rear Cross Member for 1976-1986 Jeep CJ MB3004\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3004\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt rear Jeep CJ (1976-1986) cross member is a perfect solution for those wanting to replace a bent or rusted out factory rear cross member. Over the years we have seen many Jeep Wrangler CJ's needing a replacement for the rear cross member. Often times due to someone attaching a snatch strap or chain to the thin factory Jeep cross member.\u003c\/p\u003e\n\u003cp\u003eOther cases have been due to rust. Either way the Motobilt rear cross member is a great alternative to simply installing a factory cross member. The Motobilt cross member is fabricated from heavy duty 3\/16 inch steel plate. The rear cross member retains the factory bolt holes for the rear bumper and gas tank skid.\u003c\/p\u003e\n\u003cp\u003eThe cross member also provides mounting holes for the factory corner body mount bushings. The cross member ships ready to install. Installation does require welding. It is highly recommended using a professional welder for the installation. The cross member is shipped out bare steel ready to install.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep CJ rear cross member\u003c\/li\u003e\n\u003cli\u003eFits 1976-1986 Jeep CJ\u003c\/li\u003e\n\u003cli\u003eFabricated from heavy duty 3\/16 inch steel plate\u003c\/li\u003e\n\u003cli\u003eCross member retains the factory bolt holes for the rear bumper and gas tank skid\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips ready to install\u003c\/li\u003e\n\u003cli\u003eRequires welding\u003c\/li\u003e\n\u003cli\u003eHighly recommended using a professional welder for the installation\u003c\/li\u003e\n\u003cli\u003eShips bare steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eHardware included: No\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3004\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 50 x 6 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 20 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374524391490,"sku":"MB3004","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3004-HJQL.jpg?v=1791253362"},{"product_id":"motobilt-rear-cross-member-for-1997-2006-jeep-tj-mb3003","title":"Motobilt Rear Cross Member for 1997-2006 Jeep TJ MB3003","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Rear Cross Member for 1997-2006 Jeep TJ MB3003\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3003\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt rear Jeep TJ (1997-2006) cross member is the strongest available. We base this claim because we did not simply use thicker material we also added gusseting to the cross member. The original intent was in designing a cross member for a customer who wanted to run it as a high clearance rear bumper.\u003c\/p\u003e\n\u003cp\u003eOver the years we have seen many Jeep Wrangler TJ's needing a replacement for the rear cross member. Often times due to someone attaching a snatch strap or chain to the thin factory Jeep cross member. Other cases have been due to rust. Either way the Motobilt rear cross member is a great alternative to simply installing a factory cross member. The Motobilt cross member is fabricated from heavy duty 3\/16 inch steel plate. The rear cross member retains the factory bolt holes for the rear bumper and gas tank skid.\u003c\/p\u003e\n\u003cp\u003eThe cross member also provides mounting holes for the factory corner body mount bushings. The cross member ships full welded and ready to install. Installation does require welding. It is highly recommended using a professional welder for the installation. The cross member is shipped out bare steel ready to install.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ rear cross member\u003c\/li\u003e\n\u003cli\u003eFits: 1997-2006 Jeep TJ\u003c\/li\u003e\n\u003cli\u003eFabricated from heavy duty 3\/16 inch steel plate\u003c\/li\u003e\n\u003cli\u003eCross member retains the factory bolt holes for the rear bumper and gas tank skid\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips full welded and ready to install\u003c\/li\u003e\n\u003cli\u003eRequires welding\u003c\/li\u003e\n\u003cli\u003eHighly recommended using a professional welder for the installation\u003c\/li\u003e\n\u003cli\u003eShips bare steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eHardware included: No\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3003\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 50 x 6 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 25 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/EnABTUubLaQ\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374524555330,"sku":"MB3003","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3003-HJQL.jpg?v=1791253365"},{"product_id":"motobilt-heavy-duty-front-lower-control-arm-mounts-with-cam-slots-for-jeep-tj-lj-xj-zj-mb2008-cam","title":"Motobilt Heavy Duty Front Lower Control Arm Mounts with Cam Slots for Jeep TJ\/LJ\/XJ\/ZJ MB2008-CAM","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Heavy Duty Front Lower Control Arm Mounts with Cam Slots for Jeep TJ\/LJ\/XJ\/ZJ MB2008-CAM\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB2008-CAM\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThese Motobilt Jeep lower front control arm mounts will fit a Jeep TJ, LJ, ZJ or an XJ. The mounts are CNC cut out of 1\/4 inch thick P and O steel. The factory control arms on the Jeep TJ, LJ, ZJ, XJ are notorious for failing as they are made of very thin metal. They will either tear off from the axle or bend\/break. The solution is to cut the old mounts off and weld on these HD Motobilt front lower control arm mounts. These mounts will also fit Rubicon models!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep lower front control arm mounts with cam slots\u003c\/li\u003e\n\u003cli\u003eFits Jeep TJ\/LJ\/ZJ\/XJ-also fit Rubicon models\u003c\/li\u003e\n\u003cli\u003eCNC cut out of 1\/4 inch thick P and O steel\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe mounts are available without cam slots PN MB2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front, Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB2008-CAM\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 6 x 6 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 6 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374569087042,"sku":"MB2008-CAM","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB2008-CAM-HJQL.jpg?v=1791253389"},{"product_id":"motobilt-heavy-duty-front-lower-control-arm-mounts-for-jeep-tj-lj-xj-zj-mb2008","title":"Motobilt Heavy Duty Front Lower Control Arm Mounts for Jeep TJ\/LJ\/XJ\/ZJ MB2008","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Heavy Duty Front Lower Control Arm Mounts for Jeep TJ\/LJ\/XJ\/ZJ MB2008\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB2008\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThese Motobilt Jeep lower front control arm mounts will fit a Jeep TJ, LJ, ZJ or an XJ. The mounts are CNC cut out of 1\/4 inch thick P and O steel. The factory control arms on the Jeep TJ, LJ, ZJ, XJ are notorious for failing as they are made of very thin metal. They will either tear off from the axle or bend\/break. The solution is to cut the old mounts off and weld on these HD Motobilt front lower control arm mounts. These mounts will also fit Rubicon models!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep lower front control arm mounts without cam slots\u003c\/li\u003e\n\u003cli\u003eFits Jeep TJ\/LJ\/ZJ\/XJ-also fit Rubicon models\u003c\/li\u003e\n\u003cli\u003eCNC cut out of 1\/4 inch thick P and O steel\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe mounts are available with cam slots PN MB2008-CAM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front, Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB2008\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 6 x 6 x 3 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 4 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374571118658,"sku":"MB2008","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB2008_8-HJQL.jpg?v=1791253391"},{"product_id":"motobilt-cj-yj-fender-top-mounted-coil-over-mount-mb1526","title":"Motobilt CJ\/YJ Fender Top Mounted Coil Over Mount MB1526","description":"\u003cp\u003e\u003cstrong\u003eMotobilt CJ\/YJ Fender Top Mounted Coil Over Mount MB1526\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1526\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt rear fender top mounted coil over mounts are integrated into the CJ\/YJ rear fender tops. The mounts allow you to run a rear coilover that will tie into the fender tops and the roll cage. These mounts come with the roll cage upper mounting plate so that you can tie the mount into the roll cage.\u003c\/p\u003e\n\u003cp\u003eYou can also tie the bottom section into the frame with some DOM tubing.The DOM tubing is Not included but can be purchased separately. When used with our back half kit you can mount the shock at an angle. This will provide for more wheel travel but also move the shock up and out of the way for clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear fender top mounted coilover mounts\u003c\/li\u003e\n\u003cli\u003eCJ\/YJ\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou can also tie the bottom section into the frame with some DOM tubing.The DOM tubing is Not included but can be purchased separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1526\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 10 x 8 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 12 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374603526210,"sku":"MB1526","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1526-HJQL.jpg?v=1791253426"},{"product_id":"motobilt-frame-back-half-kit-with-stubby-bumper-for-2004-2006-jeep-lj-mb3020-s","title":"Motobilt Frame Back Half Kit with Stubby Bumper for 2004-2006 Jeep LJ MB3020-S","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Frame Back Half Kit with Stubby Bumper for 2004-2006 Jeep LJ MB3020-S\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3020-S\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep LJ back half kit is the most complete on the market. This kit replaces the back section of frame rails to allow space to clear coilover shocks and increase departure angle. How does the the Jeep LJ back half kit do this? The Motobilt kit moves the frame rails from inside the wheel opening to the bottom side of the tube. In doing so the bumper location is moved up to just below the tailgate. This kit requires an experienced welder\/fabricator to install.\u003c\/p\u003e\n\u003cp\u003eBuilding custom four link suspension on a Jeep LJ does not have to be difficult. The Motobilt Jeep LJ back half kit is an effective way to gain clearance for suspension components like coilovers shocks, bypass shocks, or ORI struts. The Jeep LJ Back Half Kit moves the frame rails to the bottom side of the tube. The frame rails will mount directly to the bottom side of the rear floor board for a tight compact fit. It should be noted the kit requires cutting sheet metal on the body just below the tailgate to allow the frame rails to extend out. The bumper is then attached in this new location. The Motobilt kit comes complete with a rear bumper.\u003c\/p\u003e\n\u003cp\u003eWhat does the Motobilt Jeep LJ back half kit include? The kit includes 7 parts total in the shipment. Two lower frame rails sections and two upper frame rail sections. The installer will joint the upper and lower sections together during the mock up stage of the installation. The fifth part is the rear bumper assembly. The rear bumper comes complete with 3\/4 inch thick d-ring mounts. The kit also comes with two end caps for the bumper and frame. These are welded in place to attach the rear bumper.\u003c\/p\u003e\n\u003cp\u003eAll of the parts of this kit other than the d-ring mounts are fabricated from 3\/16 inch high strength steel plate and formed on a press brake. Unlike some of the other kits on the market we do not require you to purchase square tubing to complete the project. With that said we provide a flat point on the back center of the rear bumper for the installer to triangulate some round tubing if required. The 3\/4 inch thick high strength steel plate d-ring mounts pass all the way through the rear bumper and weld in place on both sides for ultimate strength. The d-rings have a 1 inch hole in them.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep LJ Back Half Kit with 50 inch stubby rear bumper\u003c\/li\u003e\n\u003cli\u003e3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick high strength steel plate d-ring mounts\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit includes 7 parts total in the shipment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo lower frame rails sections and two upper frame rail sections\u003c\/li\u003e\n\u003cli\u003eThe installer will joint the upper and lower sections together during the mock up stage of the installation\u003c\/li\u003e\n\u003cli\u003eThe fifth part is the rear bumper assembly. The rear bumper comes complete with 3\/4 inch thick d-ring mounts\u003c\/li\u003e\n\u003cli\u003eThe kit also comes with two end caps for the bumper and frame. These are welded in place to attach the rear bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit will not work with the factory gas tank. Most people mount a fuel cell in the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThe kit will not work with the factory coil springs\u003c\/li\u003e\n\u003cli\u003eThis kit is designed for more advanced Jeep builds where suspension and driving requirements demand more space and clearance\u003c\/li\u003e\n\u003cli\u003eThis kit requires an experienced welder\/fabricator to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eStyle: Stubby\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3020-S\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eShips in 2 boxes, 110 lb total\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374616272962,"sku":"MB3020-S","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3020-S-HJQL.jpg?v=1791253485"},{"product_id":"motobilt-frame-back-half-kit-for-jeep-tj-mb3008","title":"Motobilt Frame Back Half Kit for Jeep TJ MB3008","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Frame Back Half Kit for Jeep TJ MB3008\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3008\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep TJ back half kit is the most complete on the market. This kit replaces the back section of frame rails to allow space to clear coilover shocks and increase departure angle. How does the the Jeep TJ back half kit do this? The Motobilt kit moves the frame rails from inside the wheel opening to the bottom side of the tube. In doing so the bumper location is moved up to just below the tailgate. This kit requires an experienced welder\/fabricator to install.\u003c\/p\u003e\n\u003cp\u003eBuilding custom four link suspension on a Jeep TJ does not have to be difficult. The Motobilt Jeep TJ back half kit is an effective way to gain clearance for suspension components like coilovers shocks, bypass shocks, or ORI struts. The Jeep TJ Back Half Kit moves the frame rails to the bottom side of the tube. The frame rails will mount directly to the bottom side of the rear floor board for a tight compact fit. It should be noted the kit requires cutting sheet metal on the body just below the tailgate to allow the frame rails to extend out. The bumper is then attached in this new location. The Motobilt kit comes complete with a rear bumper.\u003c\/p\u003e\n\u003cp\u003eWhat does the Motobilt Jeep TJ back half kit include? The kit includes 7 parts total in the shipment. Two lower frame rails sections and two upper frame rail sections. The installer will joint the upper and lower sections together during the mock up stage of the installation. The fifth part is the rear bumper assembly. The rear bumper comes complete with 3\/4 inch thick d-ring mounts. The kit also comes with two end caps for the bumper and frame. These are welded in place to attach the rear bumper.\u003c\/p\u003e\n\u003cp\u003eAll of the parts of this kit other than the d-ring mounts are fabricated from 3\/16 inch high strength steel plate and formed on a press brake. Unlike some of the other kits on the market we do not require you to purchase square tubing to complete the project. With that said we provide a flat point on the back center of the rear bumper for the installer to triangulate some round tubing if required. The 3\/4 inch thick high strength steel plate d-ring mounts pass all the way through the rear bumper and weld in place on both sides for ultimate strength. The d-rings have a 1 inch hole in them.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ frame back half kit\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick high strength steel plate d-ring mounts\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes 7 parts total in the shipment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo lower frame rails sections and two upper frame rail sections\u003c\/li\u003e\n\u003cli\u003eThe installer will joint the upper and lower sections together during the mock up stage of the installation\u003c\/li\u003e\n\u003cli\u003eThe fifth part is the rear bumper assembly. The rear bumper comes complete with 3\/4 inch thick d-ring mounts\u003c\/li\u003e\n\u003cli\u003eThe kit also comes with two end caps for the bumper and frame. These are welded in place to attach the rear bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit will not work with the factory gas tank. Most people mount a fuel cell in the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThe kit will not work with the factory coil springs\u003c\/li\u003e\n\u003cli\u003eThis kit is designed for more advanced Jeep builds where suspension and driving requirements demand more space and clearance\u003c\/li\u003e\n\u003cli\u003eWe provide a flat point on the back center of the rear bumper for the installer to triangulate-some round tubing if required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3008\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 40 x 12 x 12 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 88 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374616371266,"sku":"MB3008","price":689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3008_5-HJQL.jpg?v=1791253488"},{"product_id":"motobilt-back-half-kit-for-jeep-yj-mb3001","title":"Motobilt Back Half Kit for Jeep YJ MB3001","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Back Half Kit for Jeep YJ MB3001\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3001\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep YJ Back Half Kit is designed with function in mind. We may not be the cheapest but we certainly offer the best product on the market with years of experience to back up the product design. Motobilt is defined by high quality parts and design. The Motobilt Jeep YJ Back Half Kit was designed to meet a few different needs. The journey started about 15 years ago when Dan DuBose back halved his Jeep YJ to make more room for shocks and to gain ground clearance in the rear. Over the years the hand made design evolved into laser cut and formed parts. The design has been refined with specific goals in mind.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep YJ Back Half Kit was 3D CAD designed in Solidworks for a precision fit. The parts are then CNC laser cut from 3\/16 inch thick flat steel plate, formed on a press brake, and then welded. This design and fabrication approach allows us to do things that simple box tube parts can not. The rear bumper is integrated into the design. The bumper features a very tight fitting profile with 3\/4 inch thick d-ring mounts.\u003c\/p\u003e\n\u003cp\u003eWhy installed the Motobilt Back Half Kit on your Jeep YJ? This kit provides room to mount coilover shocks and not hit the frame rails. We moved the frame rails from the factory location in the rear wheel well to under the rear floor board. This allows plenty of room to get your coilover shock angles set up correctly. Another reason is to gain about 7 inches of ground clearance in the rear bumper area.\u003c\/p\u003e\n\u003cp\u003eThis part requires extensive cutting and welding. It is recommend to have someone experienced installed this kit. It will require cutting the frame in half, cutting the body below the tailgate to allow the new frame to pass through, and welding the parts in place. Motobilt also recommends connecting your roll cage to the frame rails for added support. This kit will also require you install a fuel cell. The factory gas tank will not work with this kit.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ Back Half Kit\u003c\/li\u003e\n\u003cli\u003eFits Jeep YJ 1987-1995\u003c\/li\u003e\n\u003cli\u003eMoves frame rails under the rear floor\u003c\/li\u003e\n\u003cli\u003eImproves departure angle\u003c\/li\u003e\n\u003cli\u003eIncreases ground clearance in the rear\u003c\/li\u003e\n\u003cli\u003eIncludes a built in rear bumper\u003c\/li\u003e\n\u003cli\u003eLaser cut from 3\/16 inch steel plate\u003c\/li\u003e\n\u003cli\u003eProvides a clean place to mount air bump stops\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis part requires extensive cutting and welding. It is recommend to have someone experienced installed this kit\u003c\/li\u003e\n\u003cli\u003eIt will require cutting the frame in half, cutting the body below the tailgate to allow the new frame to pass through, and welding the parts in place\u003c\/li\u003e\n\u003cli\u003eMotobilt also recommends connecting your roll cage to the frame rails for added support\u003c\/li\u003e\n\u003cli\u003eThis kit will also require you install a fuel cell. The factory gas tank will not work with this kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3001\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 36 x 10 x 10 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 75 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374616535106,"sku":"MB3001","price":729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3001-HJQL.png?v=1791253491"},{"product_id":"motobilt-full-width-axle-conversion-kit-for-jeep-cj-mb1522","title":"Motobilt Full Width Axle Conversion Kit for Jeep CJ MB1522","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Full Width Axle Conversion Kit for Jeep CJ MB1522\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1522\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep CJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep CJ. This kit also works with older model Ford 44 and 60 fronts from the 78\/79 range. This kit fits Jeep CJ's from 1976 to 1986. \u003cbr\u003eMotobilt offers high quality fabricated parts for the DIY fabricator. It requires welding to install. The Motobilt Jeep CJ full width axle conversion kit was designed for ultimate strength and to make your Jeep look great at the same time. The kit features an removable winch plate, 42 inch in wide fabricated bumper assembly, 3\/4 inch d-ring mounts that pass through the bumper and welded on both sides, a shackle reversal spring buckets, shackle hangers for the frame, and 4 inch long boomerang shackles. The kit moves the front axle forward as much as possible without relocating the steering box. The kit is designed to work with Jeep YJ leafs springs or Jeep CJ rear springs. The front bumper features a built in bottle opener on the bottom side.\u003cbr\u003eThe bumper, and winch plate are fabricated from 3\/16 inch high strength steel plate. The side frame plate, spring buckets, shackle hangers, and shackles are fabricated from 1\/4 inch high strength steel plate. The included d-ring mounts are fabricated from 3\/4 inch thick high strength steel plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep CJ full width axle conversion kit\u003c\/li\u003e\n\u003cli\u003eBumper and winch plate are fabricated from 3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSide frame plate, spring buckets, shackle hangers, and shackles 1\/4 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eD-ring mounts are fabricated from 3\/4 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit does not include leaf springs, u-bolts, u-bolt plates, shocks, shock mounts, poly bushings and longer brake lines. Motobilt can supply these parts for an additional price\u003c\/li\u003e\n\u003cli\u003eThis kit is Not a bolt on product\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eStyle: Full Width\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1522\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 48 x 8 x 8 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 64 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/ZaZtQek3tpI\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374624202818,"sku":"MB1522","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1522-HJQL.jpg?v=1791253534"},{"product_id":"motobilt-full-width-axle-conversion-kit-for-jeep-yj-mb1502","title":"Motobilt Full Width Axle Conversion Kit for Jeep YJ MB1502","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Full Width Axle Conversion Kit for Jeep YJ MB1502\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1502\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep YJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep YJ. This kit also works with older model Ford 44 and 60 fronts from the 78\/79 range. This kit fits Jeep YJ's from 1987 to 1995. Motobilt offers high quality fabricated parts for the DIY fabricator. This kit is Not a bolt on product. It requires welding to install. The Motobilt Jeep YJ full width axle conversion kit was designed for ultimate strength and to make your Jeep look great at the same time.\u003c\/p\u003e\n\u003cp\u003ehe kit features a removable winch plate, stubby front bumper assembly, 3\/4 inch d-ring mounts that pass through the bumper and welded on both sides, a shackle reversal spring buckets, shackle bushing tubes for the frame, and 4 inch long offset shackles. The kit moves the front axle forward as much as possible without relocating the steering box. The kit is designed to work with Jeep YJ leafs springs. The front bumper features a built in bottle opener on the bottom side.\u003c\/p\u003e\n\u003cp\u003eThe kit will ship with a jig to drill through the frame to locate the rear shackle hangers. This kit was designed to keep the ride height as low as possible. The rear shackle bushings will be located mid way through the frame rail. The bumper, and winch plate are fabricated from 3\/16 inch high strength steel plate. The side frame plate, spring buckets, and shackles are fabricated from 1\/4 inch high strength steel plate. The included d-ring mounts are fabricated from 3\/4 inch thick high strength steel plate.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ full width axle conversion kit to install Chevy Dana 44 or Dana 60 front axle\u003c\/li\u003e\n\u003cli\u003e1987-1995 Jeep YJ\u003c\/li\u003e\n\u003cli\u003e1978-1979 Ford 44 and 60 fronts\u003c\/li\u003e\n\u003cli\u003eBumper and winch plate 3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eremovable winch plate\u003c\/li\u003e\n\u003cli\u003estubby front bumper assembly\u003c\/li\u003e\n\u003cli\u003eSide frame plate-spring buckets-shackles fabricated from 1\/4 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003e3\/4 inch d-ring mounts that pass through the bumper and welded on both sides\u003c\/li\u003e\n\u003cli\u003eshackle reversal spring buckets\u003c\/li\u003e\n\u003cli\u003eshackle bushing tubes for the frame\u003c\/li\u003e\n\u003cli\u003e4 inch long offset shackles\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is Not a bolt on product. Welding required to install.\u003c\/li\u003e\n\u003cli\u003eThis kit does not include leaf springs, u-bolts, u-bolt plates, shocks, shock mounts, poly bushings and longer brake lines. Motobilt can supply these parts for an additional price.\u003c\/li\u003e\n\u003cli\u003eThe front bumper features a built in bottle opener on the bottom side\u003c\/li\u003e\n\u003cli\u003eThe kit will ship with a jig to drill through the frame to locate the rear shackle hangers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eStyle: Full Width\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1502\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 36 x 8 x 8 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 56 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374624890946,"sku":"MB1502","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1502-HJQL.jpg?v=1791253535"},{"product_id":"motobilt-transmission-cross-member-jeep-jk-2012-2017-mb3023","title":"Motobilt Transmission Cross Member Jeep JK 2012-2017 MB3023","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Transmission Cross Member Jeep JK 2012-2017 MB3023\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3023\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Transmission Cross Member for 2012-2017 Jeep JK is the solution to your weak factory cross member. The factory Jeep JK cross members are a known weak point as they will flex or bow up while ontop of an obstacle off road.\u003c\/p\u003e\n\u003cp\u003eThe thin material can also dent quite easily. The Motobilt cross member is built to take the abuse a true trail rated Jeep can throw at it.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/16 inch laser cut and cnc bent steel plate design\u003c\/li\u003e\n\u003cli\u003eLayered design provides 3\/8 inch of material at the most stressfull points\u003c\/li\u003e\n\u003cli\u003eWorks with factory components or the Motobilt skid plate system.\u003c\/li\u003e\n\u003cli\u003eComplete bolt in design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3023\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 48 x 8 x 8 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 30 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374722211906,"sku":"MB3023","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3023-HJQL.jpg?v=1791253577"},{"product_id":"motobilt-transmission-cross-member-for-2007-2011-jeep-jk-mb3027","title":"Motobilt Transmission Cross Member for 2007-2011 Jeep JK MB3027","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Transmission Cross Member for 2007-2011 Jeep JK MB3027\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3027\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Transmission Cross Member for 2007-2011 Jeep JK is the solution to your weak factory cross member. The factory Jeep JK cross members are a known weak point as they will flex or bow up while ontop of an obstacle off road. The thin material can also dent quite easily. The Motobilt cross member is built to take the abuse a true trail rated Jeep can throw at it. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/16 inch laser cut and CNC bent steel plate design\u003c\/li\u003e\n\u003cli\u003eLayered design provides 3\/8 inch of material at the most stressfull points\u003c\/li\u003e\n\u003cli\u003eWorks with factory components or the Motobilt skid plate system.\u003c\/li\u003e\n\u003cli\u003eComplete bolt in design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3027\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 48 x 8 x 8 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 28 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374723227714,"sku":"MB3027","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3027-HJQL.jpg?v=1791253580"},{"product_id":"motobilt-back-half-kit-for-2007-2018-jeep-jk-jku-mb3025","title":"Motobilt Back Half Kit for 2007-2018 Jeep JK\/JKU MB3025","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Back Half Kit for 2007-2018 Jeep JK\/JKU MB3025\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3025\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis cutting edge design is the first of its kind for the Jeep JK. The kit replaces the entire back half of the frame from below the doors to the rear bumper. The Motobilt Jeep JK back half kit was 3 D cad designed by our legendary team of experts. The three main factors considered in the design were room for coil over shocks, a rear mounted fuel cell, and the ability to mount a true 4 link suspension.\u003cbr\u003e\u003cstrong\u003eThe kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePassenger side frame rails. 2 pcs\u003c\/li\u003e\n\u003cli\u003eDriver side frame rails. 2 pcs\u003c\/li\u003e\n\u003cli\u003eFrame rail connecting plates 2 pcs\u003c\/li\u003e\n\u003cli\u003eRear cross member 1 pcs\u003c\/li\u003e\n\u003cli\u003eFrame chop rear bumper 1 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with both the 2 door JK or the 4 door JKU\u003c\/li\u003e\n\u003cli\u003eFrame rails above axle center line are moved inwards 5 inches per side allowing room for coil overs.\u003c\/li\u003e\n\u003cli\u003eRoom for single or dual shocks.\u003c\/li\u003e\n\u003cli\u003eMain frame rails include 2 new body mounts that are matched to the OEM specifications for precision.\u003c\/li\u003e\n\u003cli\u003eTwo of the factory body mounts over the axle are removed.\u003c\/li\u003e\n\u003cli\u003e4 frame cross members are removed allowing room for more axle travel upward. This allows a lower center of gravity.\u003c\/li\u003e\n\u003cli\u003eThe new 3\/16 inch thick steel frame rails provide a much stronger mounting point for link mounts then the thin weak factory frame rails.\u003c\/li\u003e\n\u003cli\u003eAn optional cross member to mount 4 link mounts will be available soon.\u003c\/li\u003e\n\u003cli\u003eAn optional aluminum fuel cell with 3\/16 inch thick steel plate skid plate will be available soon. An OEM sending unit will be compatible with the new cell.\u003c\/li\u003e\n\u003cli\u003ePrecise easy to locate points for cutting the factory frame rails are provided and alignment holes are in place to make the install fool proof.\u003c\/li\u003e\n\u003cli\u003eThe install requires the frame to be cut with a saw and not a torch. This makes for a clean, quick, and precise install.\u003c\/li\u003e\n\u003cli\u003eThe rear frame rails are shortened 2.5 inches over stock and moved up 1 1\/8 inches.\u003c\/li\u003e\n\u003cli\u003eWill work with Antirock sway bar kit for JK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYour stock exhaust will have to be modified\u003c\/li\u003e\n\u003cli\u003eRequires cutting and welding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3025\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eShips in 2 boxes, 176 lb total\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374724112450,"sku":"MB3025","price":1709.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3025-HJQL.jpg?v=1791253587"},{"product_id":"motobilt-cam-delete-plates-for-front-lower-control-arms-for-2007-2018-jeep-jk-mb2114","title":"Motobilt Cam Delete Plates for Front Lower Control Arms for 2007-2018 Jeep JK MB2114","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Cam Delete Plates for Front Lower Control Arms for 2007-2018 Jeep JK MB2114\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB2114\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobil JK Cam Delete Plates allow you to eliminate the slotted factory holes that use a cam bolt. If your running aftermarket adjustable arms you do not need cam bolts and you can eliminate the weak slots. These plates come in a set of 4 which allows you to weld both sides of the control arm brackets for both the passenger and driver side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial 3\/16 steel\u003c\/li\u003e\n\u003cli\u003eIncludes 4 plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eSold as: Set\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB2114\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 3 x 3 x 3 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374751309890,"sku":"MB2114","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB2114-HJQL.png?v=1791253623"},{"product_id":"motobilt-rear-spring-hanger-mounts-1-lower-for-jeep-yj-mb1531-01","title":"Motobilt Rear Spring Hanger Mounts 1\" Lower for Jeep YJ MB1531-01","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Rear Spring Hanger Mounts 1\" Lower for Jeep YJ MB1531-01\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1531-01\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt frame mount spring hangers are a great way to move your spring mounts on your frame. They are designed to fit around your factory frame rails and weld in place. These mounts can be used to replace factory mounts or to relocate your leaf springs. They are 2.5 inch wide at the mounting location of the frame rails and the width where the leaf spring mounts is 3 inch. This is the typical measurement of a Jeep YJ rear leaf spring with bushings installed.\u003c\/p\u003e\n\u003cp\u003eThese mounts work very well with our Motobilt Jeep YJ stretch kit if you want to re use your factory Jeep YJ leaf springs. You would need to cut your old mounts off clean with the frame. The new mounts would then be positioned and welded in place. These mounts are cut in house at Motobilt by laser from 1\/4 inch thick high strength steel plate. The kit includes enough pieces to do a Pair of leaf spring mounts. They do Not come welded. We recommend that you have these welded by a professional.\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ Rear Spring Hanger Mounts\u003c\/li\u003e\n\u003cli\u003eLaser from 1\/4 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eFrame rails mounting location width 2.5 inch\u003c\/li\u003e\n\u003cli\u003eLeaf spring mounts 3 inch\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003cli\u003eThis version has the spring mounting hole 1 inch higher so it will lower your height by 1 inch in height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese mounts work very well with our Motobilt Jeep YJ stretch kit if you want to re use your factory Jeep YJ leaf springs. You would need to cut your old mounts off clean with the frame. The new mounts would then be positioned and welded in place\u003c\/li\u003e\n\u003cli\u003eRequires welding\u003c\/li\u003e\n\u003cli\u003eWe recommend that you have these welded by a professional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1531-01\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 10 x 8 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 20 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374752555074,"sku":"MB1531-01","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1531-01-HJQL.jpg?v=1791253625"},{"product_id":"motobilt-front-half-frame-kit-for-1997-2006-jeep-tj-lj-mb3034","title":"Motobilt Front Half Frame Kit for 1997-2006 Jeep TJ\/LJ MB3034","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Front Half Frame Kit for 1997-2006 Jeep TJ\/LJ MB3034\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3034\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eMB3034 Jeep TJ-LJ Front Half Frame Kit. The Motobilt MB3034 Jeep TJ-LJ Front Half Frame Kit is an innovative weld-on front steel frame replacement\/upgrade for the hard core builder who wants to transform their Jeep TJ-LJ into a true off-road beast.\u003c\/p\u003e\n\u003cp\u003eWhen swapping to larger, heavier duty front axles to accommodate large 40 inch or 42 inch tires in a Jeep TJ or LJ, it has become more and more common to move the front axle forward a few inches to provide increased upwards travel of the axle, suspension and steering components, as well as, increasing the overall wheelbase of the vehicle for stability.\u003c\/p\u003e\n\u003cp\u003eThis kit facilitates extra clearance for a true 4 link front suspension system. This essentially allows you to lower the overall center of gravity of your vehicle, which, as true hard core wheelers know, is the key to building a very capable off-road vehicle.\u003c\/p\u003e\n\u003cp\u003eThis premium builder solution takes all of the guess work out of this potentially daunting task. Designed using the very latest 3D CAD technology along with CAD files direct from Chrysler\/Jeep, our team of highly experienced professionals (who are also hard core wheelers, builders and fabricators) have engineered a precision product that simply makes your off road vehicle perform to its peak potential.\u003c\/p\u003e\n\u003cp\u003eThe boxed in C-Channel design of our kit is manufactured from high grade 3\/16 inch thick steel that is laser cut and precision CNC press brake formed. The C-Channel design fits over and laps portions of the stock frame where it is then welded permanently in place. The inner plates of the frame feature slotted weep holes to aid in cleaning and maintenance.\u003c\/p\u003e\n\u003cp\u003eWe provide detailed step-by-step instructions with photos showing where to mark and cut your existing stock TJ-LJ frame. Our kit includes locating holes which allow you to precisely position your new front frame by using existing threaded bolt hole locations in the stock frame.\u003c\/p\u003e\n\u003cp\u003eThe up swept design of the MB3034 Jeep TJ-LJ Front Half Frame Kit relocates the forward-most portion of the stock frame by moving it upwards. This means there is essentially NO approach angle caused by the frame or front bumper. The front tires are the first point of contact on any obstacle. Game changer.\u003c\/p\u003e\n\u003cp\u003eThe integrated front bumper of our kit is designed to fit a large recovery winch like the Warn Zeon 12S (or similar). The winch mount is recessed to provide protection for the winch and to provide the most airflow to the radiator.\u003c\/p\u003e\n\u003cp\u003eThe winch mounting bolts are recessed and protected from trail damage. We have included a forward facing Hawse Fairlead mount into the front bumper design, along with a separate lower opening located under the winch which gives you the ability to run your winch line straight down to the axle. For years, hard core wheelers and professional rock crawlers have been using this technique of using the winch to suck the front end down to the axle when tackling steep obstacles to change your center of gravity.\u003c\/p\u003e\n\u003cp\u003eWe have integrated this feature into this kit to make it easy. Also integrated into the front bumper design are two (2) 3\/4 inch thick high grade steel D-Ring mounts for recovery. The D-Ring plates are elongated back into the recess of the winch mount to increase the welding area for strength and to provide an additional degree of structural stability to the front frame.\u003c\/p\u003e\n\u003cp\u003eYou will be removing your stock front upper shock mounts to make room for longer coil over shocks, providing space for high clearance outer fenders, and potentially removing 3 inch from your stock hood, which, in turn, provides ample inchup-travel inch clearance for larger 40 inch-42 inch tires to articulate through its suspension cycle on larger axles. Motobilt offers solutions to help you in these stages.\u003c\/p\u003e\n\u003cp\u003eThis kit requires cutting and removing the front portion of your existing stock frame, chopping your existing engine mounts and replacing them (engine mounts not included in kit). The kit dimensionally works with the stock engine or a variety of aftermarket crate engines like LS or Hemi.\u003c\/p\u003e\n\u003cp\u003eThis kit is intended for full hydro steering systems. It does not use a mechanical steering system. The reason for changing to a full hydro steering system is to provide ample turning force when using large tires, to remove obstructions for increased inchup travel inch of the front axle and to eliminate mechanical steering linkages that are prone to hitting on obstacles resulting in breakages. This kit cleans up the entire front end and gives you a stable and strong new structure that is purpose built for rock crawling.\u003c\/p\u003e\n\u003cp\u003eWelding and finishing is required. We recommend welding be performed by a qualified welder. You will be reusing your stock grill and notching it to fit around the new front frame members. An aftermarket radiator is strongly suggested.\u003cbr\u003eThis product is shipped as three (3) pre-welded assemblies and two (2) loose flat plates. Welding is required to marry all pieces to the modified frame. \u003cbr\u003eWeight = 75 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3034\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 40 x 12 x 12 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 75 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/yuXDBoFhkq0\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374816288834,"sku":"MB3034","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3034-HJQL.jpg?v=1791253722"},{"product_id":"motobilt-10mm-hole-upper-link-arm-bracket-for-jeep-lj-mj-tj-xj-and-zj-axles-mb2148","title":"Motobilt 10mm Hole Upper Link Arm Bracket for Jeep LJ, MJ, TJ, XJ and ZJ Axles MB2148","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 10mm Hole Upper Link Arm Bracket for Jeep LJ, MJ, TJ, XJ and ZJ Axles MB2148\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB2148\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eTrying to figure out how to make a bracket to go from round tube to mount to the bushing on a factory Jeep front axle assembly? The Motobilt team has the perfect solution for you. We designed this part to go from 1-3\/4 inch round tubing to the bushings on the upper link mounts for your Jeep Axle.\u003c\/p\u003e\n\u003cp\u003eThe brackets are laser cut and CNC formed from 1\/4 inch high strength steel plate. The brackets fit the upper front links on the Jeep JK, JKU, LJ, MJ, TJ, XJ and ZJ. The formed upper link brackets are the perfect solution for those custom building their own suspension. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10mm Hole Upper Link Arm Bracket for Jeep LJ, MJ, TJ, XJ and ZJ Axles\u003c\/li\u003e\n\u003cli\u003eFinish: Bare\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eHardware Included: No\u003c\/li\u003e\n\u003cli\u003eSold As: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e JK\/JKU owners you will need the 1\/2 inch hole version\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB2148\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 8 x 8 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374919180354,"sku":"MB2148","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB2148-HJQL.jpg?v=1791253828"},{"product_id":"motobilt-1-2-hole-upper-link-arm-bracket-for-jeep-jk-lj-mj-tj-xj-and-zj-axles-mb2132","title":"Motobilt 1\/2\" Hole Upper Link Arm Bracket for Jeep JK, LJ, MJ, TJ, XJ and ZJ Axles MB2132","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 1\/2\" Hole Upper Link Arm Bracket for Jeep JK, LJ, MJ, TJ, XJ and ZJ Axles MB2132\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB2132\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eTrying to figure out how to make a bracket to go from round tube to mount to the bushing on a factory Jeep front axle assembly? The Motobilt team has the perfect solution for you. We designed this part to go from 1-3\/4 inch round tubing to the bushings on the upper link mounts for your Jeep Axle.\u003c\/p\u003e\n\u003cp\u003eThe brackets are laser cut and CNC formed from 1\/4 inch high strength steel plate. The brackets fit the upper front links on the Jeep JK, JKU, LJ, MJ, TJ, XJ and ZJ. The formed upper link brackets are the perfect solution for those custom building their own suspension. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2 Inch Hole Upper Link Arm Bracket for Jeep JK, LJ, MJ, TJ, XJ and ZJ Axles\u003c\/li\u003e\n\u003cli\u003eFinish: Bare\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eHardware Included: No\u003c\/li\u003e\n\u003cli\u003eSold As: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB2132\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 8 x 8 x 6 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45374924718146,"sku":"MB2132","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB2132-HJQL.jpg?v=1791253831"},{"product_id":"motobilt-4-link-front-brackets-with-transmission-crossmember-for-2012-2018-jeep-jku-mb7004","title":"Motobilt 4 Link Front Brackets with Transmission Crossmember for 2012-2018 Jeep JKU MB7004","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 4 Link Front Brackets with Transmission Crossmember for 2012-2018 Jeep JKU MB7004\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB7004\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eReady to transform your Jeep JK Unlimited to a whole different level of suspension capabilities? Wanting to upgrade to 1 ton axles? Check out the Motobilt JKU 4-link Front Suspension Brackets w\/Transmission crossmember.\u003c\/p\u003e\n\u003cp\u003eThis kit includes a heavy duty removable transmission cross member that replaces your factory cross member, as well as our two front suspension link mount brackets. These front lower brackets are designed to accept 2-5\/8 Inch wide joints. The front lower joint holes measure 5\/8 Inch diameter which you can drill to a larger diameter, if you choose.\u003c\/p\u003e\n\u003cp\u003eThe brackets are designed to accept 2 Inch wide joints. The front upper joint holes measure 12mm diameter which you can also drill to a larger diameter. All front brackets are located using factory frame hole locations for ease of installation. This kit covers JKU models from 2012-2018.\u003c\/p\u003e\n\u003cp\u003eWe also offer a full kit, including these front brackets and transmission crossmember, the a heavy-duty 1\/4 Inch steel skid plate, rear crossmember and rear link brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes Two front suspension brackets and transmission crossmember\u003c\/li\u003e\n\u003cli\u003e1\/4 Steel plate\u003c\/li\u003e\n\u003cli\u003eHoles can be drilled to accept larger bolts\u003c\/li\u003e\n\u003cli\u003eAlso available as a full kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eHole diameter: 5\/8 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB7004\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 36 x 24 x 18 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 70 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375072141378,"sku":"MB7004","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB7004-HJQL.jpg?v=1791254073"},{"product_id":"motobilt-4-link-rear-suspension-brackets-with-crossmember-for-jeep-jku-mb7005","title":"Motobilt 4 Link Rear Suspension Brackets with Crossmember for Jeep JKU MB7005","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 4 Link Rear Suspension Brackets with Crossmember for Jeep JKU MB7005\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB7005\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eReady to transform your Jeep JK Unlimited to a whole different level of suspension capabilities? Wanting to upgrade to 1 ton axles? Check out the Motobilt JKU 4-link Rear Suspension Brackets w\/Rear crossmember. This kit includes two rear link brackets and a new rear frame cross member which also acts as a skid mounting system and is an integral structural member to support the rear 4 link bracketry.\u003c\/p\u003e\n\u003cp\u003eRear brackets are designed to accept 2-5\/8 Inch wide joints. All rear joint holes measure 5\/8 Inch diameter, and can all be drilled to a larger diameter, if chosen. The rear brackets key into the new rear cross member \u0026amp; are scribed to fit perfectly to the inside of the factory frame. All brackets require welding to the factory frame.\u003c\/p\u003e\n\u003cp\u003eParts are shipped as fully welded sub-assemblies. Parts are shipped as raw steel. We also offer a full kit, including these front brackets and transmission crossmember, the a heavy-duty 1\/4 Inch steel skid plate, rear crossmember and rear link brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes two rear link bar brackets and rear frame cross member\u003c\/li\u003e\n\u003cli\u003eAccepts 2 5\/8 Inch wide joints\u003c\/li\u003e\n\u003cli\u003eJoint holes are 5\/8 Inch but can be driller larger\u003c\/li\u003e\n\u003cli\u003eShipped raw steel\u003c\/li\u003e\n\u003cli\u003eAlso abailable as a full kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eHole diameter: 5\/8 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB7005\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 36 x 24 x 18 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 60 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375074762818,"sku":"MB7005","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB7005-HJQL.jpg?v=1791254075"},{"product_id":"motobilt-4-link-front-brackets-with-transmission-crossmember-for-2007-2011-jeep-jku-mb7003","title":"Motobilt 4 Link Front Brackets with Transmission Crossmember for 2007-2011 Jeep JKU MB7003","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 4 Link Front Brackets with Transmission Crossmember for 2007-2011 Jeep JKU MB7003\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB7003\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eReady to transform your Jeep JK Unlimited to a whole different level of suspension capabilities? Wanting to upgrade to 1 ton axles? Check out the Motobilt JKU 4-link Front Suspension Brackets w\/Transmission crossmember.\u003c\/p\u003e\n\u003cp\u003eThis kit includes a heavy duty removable transmission cross member that replaces your factory cross member, as well as our two front suspension link mount brackets. These front lower brackets are designed to accept 2-5\/8 Inch wide joints. The front lower joint holes measure 5\/8 Inch diameter which you can drill to a larger diameter, if you choose.\u003c\/p\u003e\n\u003cp\u003eThe brackets are designed to accept 2 Inch wide joints. The front upper joint holes measure 12mm diameter which you can also drill to a larger diameter. All front brackets are located using factory frame hole locations for ease of installation.\u003c\/p\u003e\n\u003cp\u003eThis kit covers JKU models from 2007-2011. We also offer a full kit, including these front brackets and transmission crossmember, the a heavy-duty 1\/4 Inch steel skid plate, rear crossmember and rear link brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eHole diameter: 5\/8 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB7003\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 48 x 24 x 12 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 60 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375075156034,"sku":"MB7003","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB7003-HJQL.jpg?v=1791254080"},{"product_id":"motobilt-4-link-suspension-bracket-kit-with-skid-plate-for-2012-2018-jeep-jku-mb7001","title":"Motobilt 4 Link Suspension Bracket Kit with Skid Plate for 2012-2018 Jeep JKU MB7001","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 4 Link Suspension Bracket Kit with Skid Plate for 2012-2018 Jeep JKU MB7001\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB7001\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eReady to transform your Jeep JK Unlimited to a whole different level of suspension capabilities? Wanting to upgrade to 1 ton axles? Our MB7000 Jeep JKU 4 Link Suspension Bracket \u0026amp; Skid Kit takes all of the geometry guesswork out of your build. Our kit includes all of the frame mounted bracketry to allow you to build a true double triangulated rear 4 link suspension and either a triangulated 4 link front or 3 link front suspension.\u003c\/p\u003e\n\u003cp\u003eOur kit includes a new heavy duty removable transmission cross member that replaces your factory cross member, a removable heavy duty 1\/4 Inch thick high grade steel skid plate that follows the contours of the transmission cross member, a new rear frame cross member which also acts as a skid mounting system and is an integral structural member to support the rear 4 link bracketry.\u003c\/p\u003e\n\u003cp\u003eThis kit will allow you to have clearance for an aftermarket transfer case, like the Atlas II or Atlas IV. Your passenger mounted factory fuel tank will be omitted \u0026amp; moved to the rear. We have rear mounted aluminum fuel tanks, steel skids \u0026amp; EVAP modification kits available. We also offer a rear frame back half kit that also works well with our proven suspension kit. The front lower brackets are designed to accept 2-5\/8 Inch wide joints. The front lower joint holes measure 5\/8 Inch diameter which you can drill to a larger diameter, if you choose.\u003c\/p\u003e\n\u003cp\u003eThe front upper brackets are designed to accept 2 Inch wide joints. The front upper joint holes measure 12mm diameter which you can also drill to a larger diameter. All rear brackets are designed to accept 2-5\/8 Inch wide joints. All rear joint holes measure 5\/8 Inch diameter, and can all be drilled to a larger diameter, if chosen.\u003c\/p\u003e\n\u003cp\u003eAll joint pivot bolts are 100% recessed \u0026amp; protected, yet still easily accessible with standard tools for maintenance \u0026amp; future repair or service. We know, it’s a crazy idea, but we actually put a lot of thought into the simple little details, like being able to protect every bolt so future repair of your vehicle is easy, with regular tools! All front brackets are located using factory frame hole locations for ease of installation.\u003c\/p\u003e\n\u003cp\u003eThe rear brackets key into the new rear cross member \u0026amp; are scribed to fit perfectly to the inside of the factory frame. All brackets require welding to the factory frame. All joint plates are 1\/4 Inch thick high grade steel. The skid plate is manufactured from 1\/4 Inch steel with CNC press brake bends for added strength \u0026amp; includes a mid-span gusset plate. The skid features six (6) drainage weep holes, as well as, countersunk mounting holes for a completely flush under belly. No hang up points for obstacles!\u003c\/p\u003e\n\u003cp\u003eAll mounting points for the skid plate have machined threaded holes in their mating structures. No need for fish plates or nuts to remove the skid plate.\u003c\/p\u003e\n\u003cp\u003eParts are shipped as fully welded sub-assemblies. Parts are shipped as raw steel. Weight = 240 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front, Rear\u003c\/li\u003e\n\u003cli\u003eHole diameter: 5\/8 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB7001\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 60 x 12 x 12 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 100 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375075385410,"sku":"MB7001","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB7001-HJQL.jpg?v=1791254083"},{"product_id":"motobilt-4-link-suspension-bracket-kit-with-skid-plate-for-2007-2011-jeep-jku-mb7000","title":"Motobilt 4 Link Suspension Bracket Kit with Skid Plate for 2007-2011 Jeep JKU MB7000","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 4 Link Suspension Bracket Kit with Skid Plate for 2007-2011 Jeep JKU MB7000\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB7000\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eReady to transform your Jeep JK Unlimited to a whole different level of suspension capabilities? Wanting to upgrade to 1 ton axles? Our MB7000 Jeep JKU 4 Link Suspension Bracket \u0026amp; Skid Kit takes all of the geometry guesswork out of your build. Our kit includes all of the frame mounted bracketry to allow you to build a true double triangulated rear 4 link suspension and either a triangulated 4 link front or 3 link front suspension.\u003c\/p\u003e\n\u003cp\u003eOur kit includes a new heavy duty removable transmission cross member that replaces your factory cross member, a removable heavy duty 1\/4 Inch thick high grade steel skid plate that follows the contours of the transmission cross member, a new rear frame cross member which also acts as a skid mounting system and is an integral structural member to support the rear 4 link bracketry.\u003c\/p\u003e\n\u003cp\u003eThis kit will allow you to have clearance for an aftermarket transfer case, like the Atlas II or Atlas IV. Your passenger mounted factory fuel tank will be omitted \u0026amp; moved to the rear. We have rear mounted aluminum fuel tanks, steel skids \u0026amp; EVAP modification kits available. We also offer a rear frame back half kit that also works well with our proven suspension kit. The front lower brackets are designed to accept 2-5\/8 Inch wide joints. The front lower joint holes measure 5\/8 Inch diameter which you can drill to a larger diameter, if you choose.\u003c\/p\u003e\n\u003cp\u003eThe front upper brackets are designed to accept 2 Inch wide joints. The front upper joint holes measure 12mm diameter which you can also drill to a larger diameter. All rear brackets are designed to accept 2-5\/8 Inch wide joints. All rear joint holes measure 5\/8 Inch diameter, and can all be drilled to a larger diameter, if chosen.\u003c\/p\u003e\n\u003cp\u003eAll joint pivot bolts are 100% recessed \u0026amp; protected, yet still easily accessible with standard tools for maintenance \u0026amp; future repair or service. We know, it’s a crazy idea, but we actually put a lot of thought into the simple little details, like being able to protect every bolt so future repair of your vehicle is easy, with regular tools! All front brackets are located using factory frame hole locations for ease of installation.\u003c\/p\u003e\n\u003cp\u003eThe rear brackets key into the new rear cross member \u0026amp; are scribed to fit perfectly to the inside of the factory frame. All brackets require welding to the factory frame. All joint plates are 1\/4 Inch thick high grade steel. The skid plate is manufactured from 1\/4 Inch steel with CNC press brake bends for added strength \u0026amp; includes a mid-span gusset plate. The skid features six (6) drainage weep holes, as well as, countersunk mounting holes for a completely flush under belly. No hang up points for obstacles!\u003c\/p\u003e\n\u003cp\u003eAll mounting points for the skid plate have machined threaded holes in their mating structures. No need for fish plates or nuts to remove the skid plate.\u003c\/p\u003e\n\u003cp\u003eParts are shipped as fully welded sub-assemblies. Parts are shipped as raw steel. Weight = 240 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB7000\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 60 x 12 x 12 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 100 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375093571650,"sku":"MB7000","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB7000-HJQL.jpg?v=1791254085"},{"product_id":"motobilt-rear-lower-link-crossmember-for-jeep-jku-mb3028","title":"Motobilt Rear Lower Link Crossmember for Jeep JKU MB3028","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Rear Lower Link Crossmember for Jeep JKU MB3028\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3028\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eReady to transform your Jeep JK Unlimited to a whole different level of suspension capabilities? Wanting to upgrade to 1 ton axles? Check out the Motobilt Rear Lower Link Crossmember for Jeep JKU. This new rear frame cross member also acts as a skid mounting system and is an integral structural member to support the rear 4 link bracketry. Shipped as fully welded. Parts are shipped as raw steel.\u003c\/p\u003e\n\u003cp\u003eWe also offer a full kit, including these front brackets and transmission crossmember, the a heavy-duty 1\/4 Inch steel skid plate, rear crossmember and rear link brackets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips Fully Welded\u003c\/li\u003e\n\u003cli\u003eBare Steel Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3028\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 48 x 24 x 8 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 25 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375116574786,"sku":"MB3028","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3028-HJQL.jpg?v=1791254104"},{"product_id":"motobilt-4-link-suspension-bracket-and-skid-kit-for-2018-jeep-jlu-mb7006","title":"Motobilt 4 Link Suspension Bracket and Skid Kit for 2018+ Jeep JLU MB7006","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 4 Link Suspension Bracket and Skid Kit for 2018+ Jeep JLU MB7006\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB7006\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eReady to transform your Jeep JL Unlimited to a whole different level of suspension capabilities? Wanting to upgrade to 1 ton axles and coil-over shocks or ORI Struts? Want to be able to run up to 42 inch tires? We have the ultimate solution to transform your Jeep JLU into an off-roading monster!\u003c\/p\u003e\n\u003cp\u003eOur MB7006 4 Link Suspension Bracket and Skid System for Jeep JLU takes all of the geometry guesswork out of your build. Our kit includes all of the frame mounted bracketry to allow you to build a true double triangulated rear 4 link suspension and either a triangulated 4 link front suspension or 3 link front suspension with tracbar.\u003c\/p\u003e\n\u003cp\u003eThis will allow you the choice of building a 3 link front suspension with tracbar for mechanical steering or a 4 link front suspension with full hydro steering.\u003c\/p\u003e\n\u003cp\u003eOur kit includes a new heavy duty removable transmission cross member that replaces your factory cross member and also provides the mounting locations for the front lower link mounts. We include a removable heavy duty 1\/4 Inch thick high grade steel skid plate that follows the contours of the transmission cross member.\u003c\/p\u003e\n\u003cp\u003eAlso included is a new rear frame cross member which also acts as a skid mounting system and is an integral structural member to support the rear 4 link bracketry.\u003c\/p\u003e\n\u003cp\u003eTo protect your vulnerable oil and transmission pans along with the front exhaust and transmission lines, our kit includes a heavy duty engine skid which spans from forward of the factory engine oil pan and is structurally supported in the rear by the new heavy duty removable transmission cross member.\u003c\/p\u003e\n\u003cp\u003eThis kit will allow you to have clearance for an aftermarket transfer case, like the Atlas II or Atlas IV. Your passenger mounted factory fuel tank will be omitted and moved to the rear. We have rear mounted aluminum fuel tanks, steel skids and EVAP modification kits available.\u003c\/p\u003e\n\u003cp\u003eThe rear frame on a Jeep JLU is narrower than a Jeep JK, thus, a back half frame is not necessary in order fit coil-over shocks or ORI struts. We separately offer rear shock mounts (MB1562) that work seamlessly with this 4 link bracket kit and provide the clearance and height required to install your rear shocks.\u003c\/p\u003e\n\u003cp\u003eAll front and rear brackets are designed to accept 2-5\/8 inch wide joints. All joint mounting holes measure 5\/8 inch diameter which you can drill to a larger diameter, if you choose.\u003c\/p\u003e\n\u003cp\u003eAll joint pivot bolts are 100 percent recessed and protected, yet still easily accessible with standard tools for maintenance and future repair or service. We know, it's a crazy idea, but we actually put a lot of thought into the simple little details, like being able to protect every bolt so future repair of your vehicle is easy, with regular tools!\u003c\/p\u003e\n\u003cp\u003eAll front brackets are located using factory frame hole locations for ease of installation. The rear brackets key into the new rear cross member and are scribed to fit perfectly to the inside of the factory frame. All brackets require welding to the factory frame.\u003c\/p\u003e\n\u003cp\u003eAll joint plates are 1\/4 Inch thick high grade steel. The skid plate is manufactured from 1\/4 Inch steel with CNC press brake bends for added strength. The skid features six (6) drainage weep holes, as well as, countersunk mounting holes for a completely flush under belly. No hang up points for obstacles!\u003c\/p\u003e\n\u003cp\u003eAll mounting points for the skid plate have machined threaded holes in their mating structures. No need for fish plates or nuts to remove the skid plate.\u003c\/p\u003e\n\u003cp\u003eParts are shipped as fully welded sub-assemblies. Parts are shipped as raw steel. Weight = 266 lbs. Requires professional welding of kit components to factory frame.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable Belly Skid for full access to transfer case\u003c\/li\u003e\n\u003cli\u003eFlush mounted large access plate in engine skid\u003c\/li\u003e\n\u003cli\u003eCountersunk bolt heads in skid plates\u003c\/li\u003e\n\u003cli\u003eAll pivot bolts are protected\u003c\/li\u003e\n\u003cli\u003e3 or 4 Link Front Suspension capable\u003c\/li\u003e\n\u003cli\u003eTrue double triangulated Rear Suspension ready\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy oil changes\u003c\/li\u003e\n\u003cli\u003eAccessibility for easy maintenance and service\u003c\/li\u003e\n\u003cli\u003eNo bolts heads to get hung up on\u003c\/li\u003e\n\u003cli\u003eNo guesswork in suspension geometry\u003c\/li\u003e\n\u003cli\u003eDesigned for years of heavy duty off-roading\u003c\/li\u003e\n\u003cli\u003eProtection of vulnerable and expensive components\u003c\/li\u003e\n\u003cli\u003eEasy to customize\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Raw\u003c\/li\u003e\n\u003cli\u003eLocation: Front, Rear\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB7006\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 60 x 12 x 12 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 150 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375194890306,"sku":"MB7006","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB7006-HJQL.png?v=1791254159"},{"product_id":"motobilt-rear-4-link-suspension-bracket-kit-for-2018-jeep-jlu-mb7008","title":"Motobilt Rear 4 Link Suspension Bracket Kit for 2018+ Jeep JLU MB7008","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Rear 4 Link Suspension Bracket Kit for 2018+ Jeep JLU MB7008\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB7008\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eOur MB7008 Rear 4 Link Suspension Bracket Kit for Jeep JLU takes all of the rear geometry guesswork at the frame out of your build.\u003c\/p\u003e\n\u003cp\u003eOur kit includes all of the rear frame mounted bracketry to allow you to build a true double triangulated rear 4 link suspension to connect with your larger axles.\u003c\/p\u003e\n\u003cp\u003eYour passenger mounted factory fuel tank will be omitted and moved to the rear. We have rear mounted aluminum fuel tanks, steel skids and EVAP modification kits available.\u003c\/p\u003e\n\u003cp\u003eThe rear frame on a Jeep JLU is narrower than a Jeep JK, thus, a back half frame is not necessary in order fit coil-over shocks or ORI struts.\u003c\/p\u003e\n\u003cp\u003eAll rear brackets are designed to accept 2-5\/8 inch wide joints. All joint mounting holes measure 5\/8 inch diameter which you can drill to a larger diameter, if you choose. All joint pivot bolts are 100 percent recessed and protected, yet still easily accessible with standard tools for maintenance and future repair or service.\u003c\/p\u003e\n\u003cp\u003eThe rear brackets key into the new rear cross member and are scribed to fit perfectly to the inside of the factory frame. All brackets require welding to the factory frame. All joint plates are 1\/4 inch thick high grade steel.\u003c\/p\u003e\n\u003cp\u003eParts are shipped as fully welded sub-assemblies. Parts are shipped as raw steel. Requires professional welding of kit components to factory frame.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear 4 Link Suspension Bracket Kit for 2018-Present Jeep JLU\u003c\/li\u003e\n\u003cli\u003eFinish: Raw\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eFits: 2018-Present Jeep JLU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eSold as: Kit\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB7008\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 36 x 24 x 18 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 70 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375195185218,"sku":"MB7008","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB7008-HJQL.png?v=1791254162"},{"product_id":"motobilt-front-3-or-4-link-suspension-bracket-kit-for-2018-jeep-jlu-mb7007","title":"Motobilt Front 3 or 4 Link Suspension Bracket Kit for 2018+ Jeep JLU MB7007","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Front 3 or 4 Link Suspension Bracket Kit for 2018+ Jeep JLU MB7007\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB7007\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eOur MB7007 Front 3 or 4 Link Suspension Bracket Kit for Jeep JLU takes all of the front geometry guesswork at the frame out of your build.\u003c\/p\u003e\n\u003cp\u003eOur kit includes all of the front frame mounted bracketry to allow you to build either a triangulated 3 link front suspension with tracbar for mechanical steering or a triangulated 4 link front suspension for full hydro steering.\u003c\/p\u003e\n\u003cp\u003eAll front brackets are designed to accept 2-5\/8 inch wide joints. All joint mounting holes measure 5\/8 inch diameter which you can drill to a larger diameter, if you choose.\u003c\/p\u003e\n\u003cp\u003eAll joint pivot bolts are 100 percent recessed and protected, yet still easily accessible with standard tools for maintenance and future repair or service.\u003c\/p\u003e\n\u003cp\u003eAll front brackets are located using factory frame hole locations for ease of installation. All plates are 1\/4 inch thick high grade steel and expertly designed to key together with self-jigging precision tabs and slots.\u003c\/p\u003e\n\u003cp\u003eParts are shipped as fully welded sub-assemblies. Parts are shipped as raw steel. Requires professional welding of kit components to factory frame.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront 3 or 4 Link Suspension Bracket Kit for 2018-Present Jeep JLU\u003c\/li\u003e\n\u003cli\u003eFinish: Raw\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eFits: 2018-Present Jeep JLU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eSold as: Kit\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB7007\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 36 x 24 x 18 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 60 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375195316290,"sku":"MB7007","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB7007-HJQL.png?v=1791254166"},{"product_id":"motobilt-15-stretch-back-half-frame-kit-for-jeep-yj-mb3067","title":"Motobilt 15\" Stretch Back Half Frame Kit for Jeep YJ MB3067","description":"\u003cp\u003e\u003cstrong\u003eMotobilt 15\" Stretch Back Half Frame Kit for Jeep YJ MB3067\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3067\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWant to stretch your Jeep YJ to be the same length as a Jeep LJ? Where do I start? You start with a great foundation - The Frame.\u003c\/p\u003e\n\u003cp\u003eThis American made kit narrows the width of the frame by 8-1\/16 inch less than the factory YJ frame and extends the length of the frame rearward by 15 inch.\u003c\/p\u003e\n\u003cp\u003eThis provides ample room to install coil-over shocks that are positioned outboard of the frame and allow the space necessary to build your much longer custom 4 link rear suspension system to help keep the tires in contact with ground while increasing your wheel articulation.\u003c\/p\u003e\n\u003cp\u003eThe new longer wheelbase of your vehicle will greatly increase the stability and off-road capabilities of your YJ for hard core rock crawling.\u003c\/p\u003e\n\u003cp\u003eThis is a builder kit. Professional fabrication and\/or welding is recommended. This kit includes four (4) sections of new frame rails constructed using 3\/16 inch high grade steel that is precision CNC laser cut and expertly formed on our CNC press brake, then professionally welded, sanded and inspected at our state-of-the-art fabrication facility.\u003c\/p\u003e\n\u003cp\u003eAlso included is a new fully welded heavy duty rear bumper with integrated recovery mounts built in. There are also two side plates included that reinforce the join between the rear bumper and the frame rails for added strength. The new frame rails include two (2) relocated body mount holes.\u003c\/p\u003e\n\u003cp\u003eOur step-by-step assembly instructions facilitate the entire process. We show you where and how to cut your existing frame, where to make cut outs in the body for the new frame to pass through, measurements on how to square up the frame and then where to place all of your finish welds.\u003c\/p\u003e\n\u003cp\u003eThe YJ body will also get cut and moved rearward by 15 inch. This kit does not cover this process. All parts ship as raw steel. Welding is required. You will not be able to return your vehicle back to factory after this modification.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15 Inch Stretch Back Half Frame Kit for Jeep YJ\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare\u003c\/li\u003e\n\u003cli\u003eSize: 15.0 Inch\u003c\/li\u003e\n\u003cli\u003eFits: 1987-1996 Jeep Wrangler YJ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Driver Side, Passenger Side\u003c\/li\u003e\n\u003cli\u003eHardware included: No\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3067\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 36 x 12 x 18 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 55 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/73toZh4hO8A\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375198527554,"sku":"MB3067","price":779.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3067-HJQL.jpg?v=1791254174"},{"product_id":"motobilt-rear-upper-shock-mounts-16-oris-for-jeep-jlu-mb1562","title":"Motobilt Rear Upper Shock Mounts 16\" ORI's for Jeep JLU MB1562","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Rear Upper Shock Mounts 16\" ORI's for Jeep JLU MB1562\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1562\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you plan on using coil overs or ORI's with a bypass on your JL or JLU, this is the shock tower you are going to need. The Motobilt JL rear shock tower replaces the factory coil spring suspension for a coil over set up and is the most versatile shock tower on the market.\u003c\/p\u003e\n\u003cp\u003eThe shock towers are laser cut from 1\/4 inch steel plate and CNC bent in house at Motobilt. The Motobilt towers are meant to replace the stock shock buckets on your 2018+ Jeep Wrangler JL or JLU.\u003c\/p\u003e\n\u003cp\u003eThe shock towers are scribed to fit the factory chassis. They are inset into the jeep body so you can get the top of the shocks as high and close to the frame as possible. Two custom scribed filler panels are provided to fill in the area where the body needs to be cut to close you jeep back in and provide that factory finish.\u003c\/p\u003e\n\u003cp\u003eAlways cycle your suspension and check for any contact before fully welding to the frame.\u003c\/p\u003e\n\u003cp\u003eThey are bare steel DIY fab product and will require you to weld the mounting tabs and seams together. The Motobilt Jeep JL\/JLU shock towers allow you to run a standard eyelet upper shock end with a 1\/2 inch hole instead of the factory stem style.\u003c\/p\u003e\n\u003cp\u003eThese towers ship unwelded\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2018+ Jeep Wrangler JL\/JLU\u003c\/li\u003e\n\u003cli\u003eLaser cut and formed 1\/4 inch steel plate\u003c\/li\u003e\n\u003cli\u003eCan be used with stock width axles or full width axles\u003c\/li\u003e\n\u003cli\u003eDesigned for coil overs with or without a bypass\u003c\/li\u003e\n\u003cli\u003eMeasure approximately 6-7\/8 inch from the top of the frame to the center of the shock eyelet\u003c\/li\u003e\n\u003cli\u003eShock tab spacing is 1.67 in\u003c\/li\u003e\n\u003cli\u003eIncludes driver and passenger shock tower assemblies\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eProduct ships bare steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish: Raw\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1562\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 18 x 12 x 8 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 30 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375206981698,"sku":"MB1562","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1562_7-HJQL.png?v=1791254215"},{"product_id":"motobilt-double-triangulated-4-link-suspension-mounting-system-for-jeep-yj-tj-lj-mb7009","title":"Motobilt Double Triangulated 4 Link Suspension Mounting System for Jeep YJ\/TJ\/LJ MB7009","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Double Triangulated 4 Link Suspension Mounting System for Jeep YJ\/TJ\/LJ MB7009\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB7009\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eOne of the most difficult things to determine when building your own double triangulated 4 link suspension is exactly where to place all of the mounting points to provide you with good suspension articulation and correct vertical separation.\u003c\/p\u003e\n\u003cp\u003eCorrect geometry is everything. We have taken all of the guess work out for you. This suspension system fits the 1987- 1995 Jeep YJ, the 1997-2006 Jeep TJ as well as the Jeep LJ.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt suspension mount system will provide you with exceptional suspension travel, it'll be easy to connect with 1 ton axles, easy to clear engine oil pans, aftermarket engines, aftermarket transfer cases and driveshafts. You can design all of your upper and lower links to be straight, without bends, meaning they will be easy to fabricate.\u003c\/p\u003e\n\u003cp\u003eWe have built-in numerous features to not only make it easy and fast to install, but will be easy to service. We provide quick access to major mechanical driveline parts like your aftermarket transfer case and driveshafts by designing the major structural members and skids to be removable.\u003c\/p\u003e\n\u003cp\u003eThe removable one piece heavy duty steel skid plate is designed with precision fitment around the front and rear cross members. We have countersunk all fasteners for a true smooth bottom which provides no hang up points for traversing obstacles. The skid plate is quick and easy to remove for maintenance. The skid plate also features weep holes for drainage.\u003c\/p\u003e\n\u003cp\u003eOnce the skid plate is removed, you can then quickly remove the new front heavy duty transmission cross member, as well as, remove the X shaped tubular cross bracing. This provides full access to remove the transmission and any aftermarket transfer case.\u003c\/p\u003e\n\u003cp\u003eOne of the issues when removing a front transmission cross member is that you have to disconnect the front lower control arms. With every other suspension system currently available, this means your front links will not be connected to the frame and the vehicle cannot be moved. We've solved this issue.\u003c\/p\u003e\n\u003cp\u003eWe provide extra brackets that bolt into place for this type of maintenance. These brackets provide you with a temporary mounting location for your front lower links while the transmission cross member is temporarily removed. You can still move the vehicle around your shop with the front transmission cross removed.\u003c\/p\u003e\n\u003cp\u003eAll link mounting points are designed with 5\/8 inch holes through 1\/4 inch thick steel plates. You can drill out the holes for larger diameters, if desired. The inside mounting distance of all link mounting points measure 2-5\/8 inch inside. This is a very common measurement that will allow you to use a variety of quality joints with high misalignment spacers.\u003c\/p\u003e\n\u003cp\u003eBoth the front and rear upper link mounts are meticulously designed to exactly fit the profile of the factory frame. Why is this important? The closer the fit, the tighter the gaps and the stronger the connection.\u003cbr\u003eOne important note is exhaust clearance.\u003c\/p\u003e\n\u003cp\u003eThe upper links are placed in a way to allow exhaust to clear on the non driveshaft side. On our build we routed the exhaust from the header on the driveshaft side around the front of the engine. On the opposite side we modified an off the shelf headed to allow the exhaust to exit over the upper link mount where it then mated back up in Y connection.\u003c\/p\u003e\n\u003cp\u003eIf you are installing a new engine or building engine mounts we recommend doing so after the suspension is installed so that you can better align the exhaust location where you want it.\u003c\/p\u003e\n\u003cp\u003eThe underside of the entire suspension sits at the same height as the factory skid, meaning zero loss of ground clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront link vertical separation at the frame = 7-9\/16 inch\u003c\/li\u003e\n\u003cli\u003eRear link vertical separation at the frame = 5-3\/16 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB7009\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 48 x 40 x 36 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 225 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/ZQF_SO0bIbs\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375227920450,"sku":"MB7009","price":2629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB7009-HJQL.jpg?v=1791254262"},{"product_id":"motobilt-high-clearance-body-mounts-for-jeep-wrangler-tj-lj-mb3035","title":"Motobilt High Clearance Body Mounts for Jeep Wrangler TJ\/LJ MB3035","description":"\u003cp\u003e\u003cstrong\u003eMotobilt High Clearance Body Mounts for Jeep Wrangler TJ\/LJ MB3035\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3035\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eStock Jeep TJ body mounts are susceptible to trail damage and rusting out over time. The Motobilt MB3035 Jeep TJ Body Mounts are a simple, quick and extra strong solution to replacing your damaged or rusted out body mounts.\u003c\/p\u003e\n\u003cp\u003eCAD designed for a precision fit with the stock Jeep TJ or LJ frame, the Motobilt MB3035 twelve (6) piece kit is made using 3\/16 inch high strength American made steel, precision laser cut and professionally CNC press brake formed. The mounts are pre-welded assemblies. You will have to weld them to your Jeep.\u003c\/p\u003e\n\u003cp\u003eEach two part body mount is designed to precisely fit together to create an extremely strong boxed in frame as your new body-to-frame connection point. The design also protects the underside of the normally exposed body mount and bolts.\u003c\/p\u003e\n\u003cp\u003eInstallation is fast and accurate. Once your stock Jeep TJ or LJ body mounts are cut off your factory frame, simply bolt your new Motobilt MB3035 Jeep TJ-LJ Body Mounts back to your body using the factory bolts and isolators, then fully weld around the perimeter of the new body mount to your frame.\u003c\/p\u003e\n\u003cp\u003eWe highly recommend doing one body mount at a time to ensure your body is located properly.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt MB3035Jeep TJ-LJ Body Mounts fit all model years of the Jeep TJ or LJ (1996-2006)\u003c\/p\u003e\n\u003cp\u003eThis products ships welded. 6 piece assembly kit. Welding required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes 6 mounts\u003c\/li\u003e\n\u003cli\u003e3\/16 inch laser cut steel plate construction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBody Lift NOT required.\u003c\/li\u003e\n\u003cli\u003eHardware NOT included. (Re-use factory)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3035\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 18 x 12 x 8 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 35 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375257706562,"sku":"MB3035","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3035-HJQL.jpg?v=1791254326"},{"product_id":"motobilt-hd-transmission-crossmember-for-jeep-gladiator-mb3078","title":"Motobilt HD Transmission Crossmember for Jeep Gladiator MB3078","description":"\u003cp\u003e\u003cstrong\u003eMotobilt HD Transmission Crossmember for Jeep Gladiator MB3078\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3078\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe OEM crossmember is weak and does not stand up to the demands we as offroaders put our vehicles through. So we developed a replacement for the person that needs worry free performance from all of their parts.\u003c\/p\u003e\n\u003cp\u003eThe MB3078 works with the factory skid plates along with our vehicle specific skid plate systems.\u003c\/p\u003e\n\u003cp\u003eMade from 3\/16 inch HRPO steel you don't have to worry anymore about destroying your crossmember on that next obstacle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2020+ Jeep Gladiator Mojave\u003c\/li\u003e\n\u003cli\u003e2022+ Jeep Gladiator (All Trim Levels)\u003c\/li\u003e\n\u003cli\u003eWill NOT fit 2020-2021 3.6 non Mojave Gladiator\u003c\/li\u003e\n\u003cli\u003eFits the Diesel and 3.6L Gas Jeep Gladiator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eDimensions H\/W\/D = 3.5 inch x 38.75 inch x 4.5 inch\u003c\/li\u003e\n\u003cli\u003eWeight: 23 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHD Crossmember\u003c\/li\u003e\n\u003cli\u003eHardware Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eSold as: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3078\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 36 x 8 x 8 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 30 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375265177666,"sku":"MB3078","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3078-HJQL.jpg?v=1791254331"},{"product_id":"motobilt-front-shock-towers-for-ori-struts-for-jeep-jl-jlu-jt-mb1565","title":"Motobilt Front Shock Towers for ORI Struts for Jeep JL\/JLU\/JT MB1565","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Front Shock Towers for ORI Struts for Jeep JL\/JLU\/JT MB1565\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1565\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you plan on using coil overs or ORI's with a bypass on your JL or JLU, this is the shock tower you are going to need. The Motobilt JL rear shock tower replaces the factory coil spring suspension for a coil over set up and is the most versatile shock tower on the market.\u003c\/p\u003e\n\u003cp\u003eThe shock towers are laser cut from 1\/4 Inch steel plate and CNC bent in house at Motobilt. The Motobilt towers are meant to replace the stock shock buckets on your 2018-Present Jeep Wrangler JL or JLU.\u003c\/p\u003e\n\u003cp\u003eThe shock towers are scribed to fit the factory chassis. They are inset into the jeep body so you can get the top of the shocks as high and close to the frame as possible. Two custom scribed filler panels are provided to fill in the area where the body needs to be cut to close you jeep back in and provide that factory finish. Always cycle your suspension and check for any contact before fully welding to the frame.\u003c\/p\u003e\n\u003cp\u003eThey are bare steel DIY fab product and will require you to weld the mounting tabs and seams together. The Motobilt Jeep JL\/JLU shock towers allow you to run a standard eyelet upper shock end with a 1\/2 inch hole instead of the factory stem style. These towers ship unwelded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2018-Present Jeep Wrangler JL\/JLU\u003c\/li\u003e\n\u003cli\u003eLaser cut and formed 1\/4 inch steel plate\u003c\/li\u003e\n\u003cli\u003eCan be used with stock width axles or full width axles\u003c\/li\u003e\n\u003cli\u003eDesigned for coil overs with or without a bypass\u003c\/li\u003e\n\u003cli\u003eMeasure approximately 9 1\/2 inches from the top of the frame to the center of the shock eyelet\u003c\/li\u003e\n\u003cli\u003eShock tab spacing is 1.67in\u003c\/li\u003e\n\u003cli\u003eIncludes driver and passenger shock tower assemblies\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct ships bare steel\u003c\/li\u003e\n\u003cli\u003eCan be used with 12 Inch, 14 Inch or 16 Inch travel coil overs\/ORI struts depending on your over all build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1565\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 47 x 9 x 25 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 20 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375537020994,"sku":"MB1565","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1565-HJQL.png?v=1791254684"},{"product_id":"motobilt-back-half-frame-kit-with-wide-bumper-for-2004-2006-jeep-lj-mb3020-w","title":"Motobilt Back Half Frame Kit with Wide Bumper for 2004-2006 Jeep LJ MB3020-W","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Back Half Frame Kit with Wide Bumper for 2004-2006 Jeep LJ MB3020-W\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3020-W\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep LJ back half kit is the most complete on the market. This kit replaces the back section of frame rails to allow space to clear coilover shocks and increase departure angle. How does the the Jeep LJ back half kit do this? The Motobilt kit moves the frame rails from inside the wheel opening to the bottom side of the tube. In doing so the bumper location is moved up to just below the tailgate. This kit requires an experienced welder\/fabricator to install.\u003c\/p\u003e\n\u003cp\u003eBuilding custom four link suspension on a Jeep LJ does not have to be difficult. The Motobilt Jeep LJ back half kit is an effective way to gain clearance for suspension components like coilovers shocks, bypass shocks, or ORI struts. The Jeep LJ Back Half Kit moves the frame rails to the bottom side of the tube. The frame rails will mount directly to the bottom side of the rear floor board for a tight compact fit.\u003c\/p\u003e\n\u003cp\u003eIt should be noted the kit requires cutting sheet metal on the body just below the tailgate to allow the frame rails to extend out. The bumper is then attached in this new location. The Motobilt kit comes complete with a rear bumper. The wide version is for those who are not going to stretch their wheelbase.\u003c\/p\u003e\n\u003cp\u003eWhat does the Motobilt Jeep LJ back half kit include? The kit includes 7 parts total in the shipment. Two lower frame rails sections and two upper frame rail sections. The installer will joint the upper and lower sections together during the mock up stage of the installation. The fifth part is the rear bumper assembly. The rear bumper comes complete with 3\/4 inch thick d-ring mounts. The kit also comes with two end caps for the bumper and frame. These are welded in place to attach the rear bumper.\u003c\/p\u003e\n\u003cp\u003eAll of the parts of this kit other than the d-ring mounts are fabricated from 3\/16 inch high strength steel plate and formed on a press brake. Unlike some of the other kits on the market we do not require you to purchase square tubing to complete the project.\u003c\/p\u003e\n\u003cp\u003eWith that said we provide a flat point on the back center of the rear bumper for the installer to triangulate some round tubing if required. The 3\/4 inch thick high strength steel plate d-ring mounts pass all the way through the rear bumper and weld in place on both sides for ultimate strength. The d-rings have a 1 inch hole in them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBack Half Frame Kit w\/ Wide Bumper\u003c\/li\u003e\n\u003cli\u003eFits: 04-06 Jeep LJ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3020-W\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 7 x 5 x 3 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375624347714,"sku":"MB3020-W","price":809.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3020-W-HJQL.jpg?v=1791254873"},{"product_id":"motobilt-full-width-axle-conversion-kit-with-stinger-for-jeep-cj-mb1522-s","title":"Motobilt Full Width Axle Conversion Kit with Stinger for Jeep CJ MB1522-S","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Full Width Axle Conversion Kit with Stinger for Jeep CJ MB1522-S\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1522-S\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep CJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep CJ. This kit also works with older model Ford 44 and 60 fronts from the 78\/79 range. This kit fits Jeep CJ's from 1976 to 1986.\u003c\/p\u003e\n\u003cp\u003eMotobilt offers high quality fabricated parts for the DIY fabricator. It requires welding to install. The Motobilt Jeep CJ full width axle conversion kit was designed for ultimate strength and to make your Jeep look great at the same time.\u003c\/p\u003e\n\u003cp\u003eThe kit features an removable winch plate, 42 inch in wide fabricated bumper assembly, 3\/4 inch d-ring mounts that pass through the bumper and welded on both sides, a shackle reversal spring buckets, shackle hangers for the frame, and 4 inch long boomerang shackles.\u003c\/p\u003e\n\u003cp\u003eThe kit moves the front axle forward as much as possible without relocating the steering box. The kit is designed to work with Jeep YJ leafs springs or Jeep CJ rear springs. The front bumper features a built in bottle opener on the bottom side.\u003c\/p\u003e\n\u003cp\u003eThe bumper, and winch plate are fabricated from 3\/16 inch high strength steel plate. The side frame plate, spring buckets, shackle hangers, and shackles are fabricated from 1\/4 inch high strength steel plate. The included d-ring mounts are fabricated from 3\/4 inch thick high strength steel plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep CJ full width axle conversion kit with stinger\u003c\/li\u003e\n\u003cli\u003eBumper and winch plate are fabricated from 3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSide frame plate, spring buckets, shackle hangers, and shackles 1\/4 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eD-ring mounts are fabricated from 3\/4 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit does not include leaf springs, u-bolts, u-bolt plates, shocks, shock mounts, poly bushings and longer brake lines. Motobilt can supply these parts for an additional price\u003c\/li\u003e\n\u003cli\u003eThis kit is Not a bolt on product\u003c\/li\u003e\n\u003cli\u003eWelding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1522-S\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 48 x 18 x 8 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 74 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375707250754,"sku":"MB1522-S","price":889.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1522-S_0-HJQL.jpg?v=1791255010"},{"product_id":"motobilt-full-width-axle-conversion-kit-with-stinger-for-jeep-yj-mb1502-s","title":"Motobilt Full Width Axle Conversion Kit with Stinger for Jeep YJ MB1502-S","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Full Width Axle Conversion Kit with Stinger for Jeep YJ MB1502-S\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB1502-S\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep YJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep YJ. This kit also works with older model Ford 44 and 60 fronts from the 78\/79 range. This kit fits Jeep YJ's from 1987 to 1995. Motobilt offers high quality fabricated parts for the DIY fabricator. This kit is Not a bolt on product. It requires welding to install. The Motobilt Jeep YJ full width axle conversion kit was designed for ultimate strength and to make your Jeep look great at the same time.\u003c\/p\u003e\n\u003cp\u003ehe kit features a removable winch plate, stubby front bumper assembly, 3\/4 inch d-ring mounts that pass through the bumper and welded on both sides, a shackle reversal spring buckets, shackle bushing tubes for the frame, and 4 inch long offset shackles. The kit moves the front axle forward as much as possible without relocating the steering box. The kit is designed to work with Jeep YJ leafs springs. The front bumper features a built in bottle opener on the bottom side.\u003c\/p\u003e\n\u003cp\u003eThe kit will ship with a jig to drill through the frame to locate the rear shackle hangers. This kit was designed to keep the ride height as low as possible. The rear shackle bushings will be located mid way through the frame rail. The bumper, and winch plate are fabricated from 3\/16 inch high strength steel plate. The side frame plate, spring buckets, and shackles are fabricated from 1\/4 inch high strength steel plate. The included d-ring mounts are fabricated from 3\/4 inch thick high strength steel plate.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ full width axle conversion kit to install Chevy Dana 44 or Dana 60 front axle with Stinger\u003c\/li\u003e\n\u003cli\u003e1987-1995 Jeep YJ\u003c\/li\u003e\n\u003cli\u003e1978-1979 Ford 44 and 60 fronts\u003c\/li\u003e\n\u003cli\u003eBumper and winch plate 3\/16 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eremovable winch plate\u003c\/li\u003e\n\u003cli\u003estubby front bumper assembly\u003c\/li\u003e\n\u003cli\u003eSide frame plate-spring buckets-shackles fabricated from 1\/4 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003e3\/4 inch d-ring mounts that pass through the bumper and welded on both sides\u003c\/li\u003e\n\u003cli\u003eshackle reversal spring buckets\u003c\/li\u003e\n\u003cli\u003eshackle bushing tubes for the frame\u003c\/li\u003e\n\u003cli\u003e4 inch long offset shackles\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is Not a bolt on product. Welding required to install.\u003c\/li\u003e\n\u003cli\u003eThis kit does not include leaf springs, u-bolts, u-bolt plates, shocks, shock mounts, poly bushings and longer brake lines. Motobilt can supply these parts for an additional price.\u003c\/li\u003e\n\u003cli\u003eThe front bumper features a built in bottle opener on the bottom side\u003c\/li\u003e\n\u003cli\u003eThe kit will ship with a jig to drill through the frame to locate the rear shackle hangers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB1502-S\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 36 x 18 x 8 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 66 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375707447362,"sku":"MB1502-S","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB1502-S-HJQL.jpg?v=1791255013"},{"product_id":"motobilt-mid-frame-section-for-jeep-yj-tj-lj-mb3080","title":"Motobilt Mid Frame Section for Jeep YJ\/TJ\/LJ MB3080","description":"\u003cp\u003e\u003cstrong\u003eMotobilt Mid Frame Section for Jeep YJ\/TJ\/LJ MB3080\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3080\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eLooking to build out a complete Motobilt frame? The foundation starts with the Motobilt Mid Frame Section for the Jeep YJ, TJ, and LJ. Designed to work with the Motobilt front half and back half kits, this heavy-duty section provides the strength and precision fit needed to upgrade your rig's foundation.\u003c\/p\u003e\n\u003cp\u003eFabricated from 3\/16 inch thick American steel, the MB3080 is built to handle extreme off-road use and the rigors of trail abuse. Often when building a custom Jeep YJ, TJ, or LJ you find out that the center section is rusted out or damaged so what do you do? That's where the mid frame section comes in as it's a heavy duty center section designed to work with the Motobilt front and back half kits.\u003c\/p\u003e\n\u003cp\u003eWhy buy a rusted out or expensive factory Jeep frame when you are building a hardcore off road rig? Many customers will use this frame section along with a back half kit to convert from a YJ or TJ to the LJ length or what's referred to as an TJ-6.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003e3\/16 inch Steel Construction\u003c\/li\u003e\n\u003cli\u003eAllows you to build a complete frame\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ\u003c\/li\u003e\n\u003cli\u003eJeep TJ\u003c\/li\u003e\n\u003cli\u003eJeep LJ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Half Kit: MB3034\u003c\/li\u003e\n\u003cli\u003eBack Half Kit: MB3008 (TJ), MB3001 (YJ), MB3020-S\/MB3020-W (LJ)\u003c\/li\u003e\n\u003cli\u003eSuspension: MB7009 (YJ\/TJ\/LJ) Double Triangulated 4 link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 77 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips raw steel; must be painted or powder coated to prevent rust.\u003c\/li\u003e\n\u003cli\u003eThis is NOT a factory replacement frame section to repair your damaged or rusted frame.\u003c\/li\u003e\n\u003cli\u003eWelding required for installation.\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended for proper alignment and fitment.\u003c\/li\u003e\n\u003cli\u003eDoes not include body mounts or threaded skid plate mounting holes. Recommended: YJ-MB3081 Body mounts. TJ\/LJ -MB3035 Body Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eHardware included: No\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3080\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 55 x 17 x 9 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 80 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/GkcBRJsFZLU?si=JXDLfDOMZddq3U6L\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375962611778,"sku":"MB3080","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3080-HJQL.jpg?v=1791255235"},{"product_id":"motobilt-high-clearance-body-mounts-for-jeep-yj-mb3081","title":"Motobilt High Clearance Body Mounts for Jeep YJ MB3081","description":"\u003cp\u003e\u003cstrong\u003eMotobilt High Clearance Body Mounts for Jeep YJ MB3081\u003c\/strong\u003e – Motobilt part number \u003cstrong\u003eMB3081\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eGain more clearance and protection without a body lift using the Motobilt High Clearance Body Mounts for the Jeep YJ. These mounts replace the factory body mounts with a low-profile, high-clearance design, giving your rig extra space for custom rockers, armor, or body modifications while maintaining proper body alignment and fitment.\u003c\/p\u003e\n\u003cp\u003ePrecision-cut and formed from 3\/16 inch thick American steel, each mount is built to handle the toughest off-road conditions. The Motobilt design eliminates the need for a body lift and provides a clean, durable mounting solution for those pushing their Jeeps to the limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003e3\/16 inch Steel Construction\u003c\/li\u003e\n\u003cli\u003eIncludes 6 Mounts\u003c\/li\u003e\n\u003cli\u003eBody Lift Not Required\u003c\/li\u003e\n\u003cli\u003eHardware Not Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep YJ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMid Frame Section for Jeep YJ\/TJ\/LJ: MB3081\u003c\/li\u003e\n\u003cli\u003eFactory YJ Frame\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 12.67 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips raw steel; must be painted or powder coated to prevent rust.\u003c\/li\u003e\n\u003cli\u003eWelding required for installation.\u003c\/li\u003e\n\u003cli\u003eDesigned for off-road and custom applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 Inch\u003c\/li\u003e\n\u003cli\u003eHardware included: No\u003c\/li\u003e\n\u003cli\u003eSold as: Set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt part number: MB3081\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003ePackage size: 13 x 11 x 9 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 15 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/GkcBRJsFZLU?si=JXDLfDOMZddq3U6L\" target=\"_blank\" rel=\"noopener\"\u003eProduct video\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 warning:\u003c\/strong\u003e Cancer and Reproductive Harm – \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":45375962906690,"sku":"MB3081","price":319.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/MB3081-HJQL.jpg?v=1791255237"},{"product_id":"rockjock-shock-mount-relocation-kit-07-18-wrangler-jk-rear-lower-ce-9807rsrk","title":"RockJock Shock Mount Relocation Kit 07-18 Wrangler JK Rear Lower CE-9807RSRK","description":"\u003cp\u003e\u003cstrong\u003eRockJock Shock Mount Relocation Kit 07-18 Wrangler JK Rear Lower Includes Hardware Pair CE-9807RSRK\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRockJock's rear shock relocator kit for 2007-2018 Jeep JK Wranglers includes zinc plated spacer sleeves and all hardware to relocate the bottoms of the rear shocks. Detailed instructions included.\u003c\/p\u003e\n\u003cp\u003eThese brackets are included in all of our JK Wrangler suspension systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e Shock Mount Relocation Kit\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK Rear Lower\u003c\/li\u003e\n\u003cli\u003eIncludes Hardware\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProduct information\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: CE-9807RSRK\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eWeight: 2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalifornia Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.\u003c\/p\u003e","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":45910665330754,"sku":"CE-9807RSRK","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/CE-9807RSRK-HWSH.jpg?v=1794021946"},{"product_id":"rockjock-shock-mount-relocation-kit-07-18-wrangler-jk-front-upper-ce-9807fsrk","title":"RockJock Shock Mount Relocation Kit 07-18 Wrangler JK Front Upper CE-9807FSRK","description":"\u003cp\u003e\u003cstrong\u003eRockJock Shock Mount Relocation Kit 07-18 Wrangler JK Front Upper Includes Hardware Pair CE-9807FSRK\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRockJock's front shock relocator kit for 2007-2018 Jeep JK Wranglers includes semi-gloss black powder coated relocator brackets for the top of the shocks, all necessary hardware, and complete instructions.\u003c\/p\u003e\n\u003cp\u003eThese brackets are included in all of our JK Wrangler suspension systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShock Mount Relocation Kit\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK Front Upper\u003c\/li\u003e\n\u003cli\u003eIncludes Hardware\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProduct information\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: CE-9807FSRK\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003cli\u003eFinish: Powdercoat\u003c\/li\u003e\n\u003cli\u003eColor: Black Semi Gloss\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eWeight: 3 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalifornia Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.\u003c\/p\u003e","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":45910665789506,"sku":"CE-9807FSRK","price":84.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/CE-9807FSRK_0-HWSH.jpg?v=1794021966"},{"product_id":"rockjock-shock-mount-extensions-97-06-wrangler-tj-and-lj-unlimited-rear-lower-ce-9601","title":"RockJock Shock Mount Extensions 97-06 Wrangler TJ and LJ Unlimited Rear Lower CE-9601","description":"\u003cp\u003e\u003cstrong\u003eRockJock Shock Mount Extensions 97-06 Wrangler TJ and LJ Unlimited Rear Lower Includes Hardware Pair CE-9601\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRockJock's rear lower shock mount extension brackets for 1997-2006 Jeep TJ Wranglers and LJ Unlimiteds move the bottoms of the shocks outward, to prevent them from making contact with the coil spring cups and the axle tubes on the differential housing when pinion angle is raised.\u003c\/p\u003e\n\u003cp\u003eFinished in semi-gloss black powder coat and includes all hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShock Mount Extensions\u003c\/li\u003e\n\u003cli\u003e97-06 Wrangler TJ and LJ Unlimited\u003c\/li\u003e\n\u003cli\u003eRear Lower\u003c\/li\u003e\n\u003cli\u003eIncludes Hardware\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProduct information\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: CE-9601\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003cli\u003eFinish: Powdercoat\u003c\/li\u003e\n\u003cli\u003eColor: Black Semi Gloss\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eWeight: 3 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalifornia Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.\u003c\/p\u003e","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":45910666313794,"sku":"CE-9601","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/CE-9601_0-HWSH.jpg?v=1794021995"},{"product_id":"rockjock-heavy-duty-motor-mount-kit-87-06-wrangler-yj-tj-lj-includes-hardware","title":"RockJock Heavy Duty Motor Mount Kit 87-06 Wrangler YJ TJ\/LJ Includes Hardware","description":"\u003cp\u003e\u003cstrong\u003eRockJock Heavy Duty Motor Mount Kit 87-06 Wrangler YJ TJ\/LJ Includes Hardware\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRockJock's 1 Inch lifted motor mounts for 1987-2006 Jeep TJ\/LJ\/YJ vehicles equipped with the 4.0L 6 cylinder engine are specially designed to lift the front of the engine one inch to assist in reducing driveline angles on lifted vehicles.\u003c\/p\u003e\n\u003cp\u003eThe 1 Inch motor mounts also lift engine fan allowing it line up with radiator shroud properly when the Jeep TJ\/LJ\/YJ Wrangler 1 Inch body lift kit is installed.\u003c\/p\u003e\n\u003cp\u003eSuper heavy duty construction with large diameter urethane bushings to absorb vibration. All mounting hardware is included. Semi-gloss black powder coat finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Details: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy Duty Motor Mount Kit\u003c\/li\u003e\n\u003cli\u003e87-06 Wrangler YJ TJ\/LJ\u003c\/li\u003e\n\u003cli\u003e1 Inch Raised\u003c\/li\u003e\n\u003cli\u003eIncludes Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e(4.0L only)\u003c\/h3\u003e\u003cp\u003eRockJock's heavy duty motor mounts for 1987-2006 Jeep TJ\/LJ\/YJ vehicles equipped with the 4.0L 6 cylinder engine are specially designed to directly replace the stock OEM part.\u003c\/p\u003e\n\u003cp\u003eFeatures include super heavy duty construction with large diameter urethane bushings to absorb vibration. All mounting hardware is included. Semi-gloss black powder coat finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy Duty Motor Mount Kit\u003c\/li\u003e\n\u003cli\u003e87-06 Wrangler YJ TJ\/LJ (4.0L only)\u003c\/li\u003e\n\u003cli\u003eIncludes Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProduct information\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 Inch Raised: part number CE-9200\u003c\/li\u003e\n\u003cli\u003e(4.0L only): part number CE-9201\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003cli\u003eFinish: Powdercoat\u003c\/li\u003e\n\u003cli\u003eColor: Black Semi Gloss\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalifornia Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.\u003c\/p\u003e","brand":"RockJock 4x4","offers":[{"title":"1 Inch Raised","offer_id":45910666379330,"sku":"CE-9200","price":208.0,"currency_code":"USD","in_stock":true},{"title":"(4.0L only)","offer_id":45910666412098,"sku":"CE-9201","price":208.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/CE-9200_3-HWSH.jpg?v=1794021998"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/collections\/MB1500-HJQL.jpg?v=1794016108","url":"https:\/\/www.skinnypedalracing.com\/collections\/jeep-chassis-and-suspension-brackets.oembed?page=2","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}