{"title":"Ford Bronco 2021+ Lift Kits and Leveling Kits","description":"\u003cp\u003eLift kits and leveling kits for the 2021 and newer Ford Bronco. Level the stance, clear bigger tires or go all in with a complete suspension system from BDS, ReadyLIFT, Rock Krawler and Bilstein.\u003c\/p\u003e","products":[{"product_id":"3-inch-lift-kit-fox-performance-elite-coil-overs-ford-bronco-21-23-uniball-control-arm","title":"3 Inch Lift Kit FOX Performance Elite Coil-Over's Ford Bronco 21-23 Uniball Control Arm","description":"\u003cp\u003eUp the ante in your 2021-2023 Ford Bronco 4 Door with style and performance by installing this 3 to 4-inch lift kit featuring FOX Performance Elite 2.5 coil-over shocks from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes FOX 2.5 Performance Elite Series remote reservoir coil-over shocks and heavy duty tubular upper control arms for increased strength. In the rear, BDS utilizes a complementary set of FOX 2.5 Performance Elite coil-over shocks for an improved ride. \u003c\/p\u003e\n\u003cp\u003eNet lift height varies based on the factory suspension configuration as follows: 4-Door Sasquatch-equipped net 3 inch of lift, 4-Door Badlands: net 3.5 inch of lift, and 4-Door Broncos with the base suspension: net 4 inch of lift.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology.\u003c\/p\u003e\n\u003cp\u003eThey include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms (UCAs)\u003c\/p\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed high-stength uniball to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 3.5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eLift height is based on base suspension package, Badlands and Sasquatch models will net less lift however final ride height is the same for all trims.\u003c\/li\u003e\n\u003cli\u003eDo NOT hit the aluminum knuckle with a hammer to separate the ball joint. Use appropriate ball joint separation tool (OTC 204592).\u003c\/li\u003e\n\u003cli\u003eWill not work with models with a height sensor attached to the UCA.\u003c\/li\u003e\n\u003cli\u003eDoes not fit Bronco Sport models.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Raptor Models.\u003c\/li\u003e\n\u003cli\u003eIs compatible with HOSS 3.0 Bronco Models\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eWill provide the following lift amounts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Door Without Sasquatch Package - 4.5 inch Lift\u003c\/li\u003e\n\u003cli\u003e4 Door Without Sasquatch Package - 4 inch Lift\u003c\/li\u003e\n\u003cli\u003e2 Door With Sasquatch Package - 3.5 inch Lift\u003c\/li\u003e\n\u003cli\u003e4 Door With Sasquatch Package - 3 inch Lift\u003c\/li\u003e\n\u003cli\u003eFOX 2.5 Performance Elite series coil-overs offer improved damper performance over stock\u003c\/li\u003e\n\u003cli\u003ePerformance UCAs increase strength and allow for more suspension travel\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003cli\u003eFactory Protection Plus drivetrain warranty included\u003c\/li\u003e\n\u003cli\u003eEasy, 100 percent Bolt on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5.5\/5.53-4 hrs\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS123254, 2021-2023 Ford Bronco Upper Control Arm - BDS, UPC Code 711745604117\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88306212, Kit: 21-ON Ford Bronco, 4 Door, w\/UCA, Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, Base 4 inch Lift, Sasquatch 3 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88306213, Kit: 21-ON Ford Bronco, 4 Door, Rear Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, Base 3 inch Lift, Sasquatch 2 inch, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":44513711489090,"sku":"BDS1905FPE","price":6065.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/BDS1905FPE_0-BLDV.jpg?v=1784950860"},{"product_id":"4-inch-lift-suspension-package-koh-edition-ford-bronco-21-23","title":"4 Inch Lift Suspension Package KOH Edition Ford Bronco 21-23","description":"\u003cp\u003eBuild the ultimate Bronco with the same setup trusted by KOH racers Jason Scherer. The KOH Edition Bronco suspension package by BDS was born in the desert to withstand the toughest conditions proven on the King of Hammers racecourse. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes FOX 2.5 Performance Elite Series remote reservoir coil-over shocks, heavy duty tubular upper control arms for increased strength, steering tie rod sleeves to increase diameter or stock tie rods, max Tire clearance kit to fit 37 inch Tires and lower control arm skid plates for the ultimate protection.\u003c\/p\u003e\n\u003cp\u003eIn the rear, BDS utilizes a complementary set of FOX 2.5 Performance Elite coil-over shocks for an improved ride, -rear lower tubular control arms to give max flex, adjustable rear track bar to keep everything aligned, and a set of lower shock skids to prevent damage from rocks or debris.\u003c\/p\u003e\n\u003cp\u003eFOX Performance Elite\u003c\/p\u003e\n\u003cp\u003eFOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The Dual Speed Compression Adjust adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eHD Upper Control Arms\u003c\/p\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5 inch OD x .120-wall tubular construction with an indexed high-strength uniball to correct the ball joint positioning allowing additional down travel and camber adjustment.\u003c\/p\u003e\n\u003cp\u003eAt the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability.\u003c\/p\u003e\n\u003cp\u003eArms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003cp\u003eHD Rear Trailing Arms\u003c\/p\u003e\n\u003cp\u003eBuilt from thick wall 1.9 inch diameter tubing and specially formed to maximize Tire clearance. The axle side utilizes an OE-style rubber bushing for long service-free operation and better isolation of the noise, vibration, and harshness associated with driving across various terrain.\u003c\/p\u003e\n\u003cp\u003eThe frame mount side features a large forged end for strength and durability and is available with either OE-style rubber bushings or flex ends that allow up to 30-degrees of misalignment for greater articulation.\u003c\/p\u003e\n\u003cp\u003eShock Protection\u003c\/p\u003e\n\u003cp\u003eFinishing off your KOH Bronco is a set of front and rear shock skid plates to protect your valuable assets. These heavy duty skids are constructed from 3\/16 inch steel, specially formed to provide the ultimate rock and offroad protection for the stock lower control arms, lower strut mount and CV shafts when you hit the trail.\u003c\/p\u003e\n\u003cp\u003eRear steel skids reinforce the factory shock mount and provide ample protection from rocks and other obstacles to the lower shock and mount. The design also features an integrated roost guard, adding further protection to the shock body from stones or debris you may kick up on the trail.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Coil-Over\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3.5 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 3.5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eDo NOT hit the aluminum knuckle with a hammer to separate the ball joint. Use the appropriate ball joint separation tool (OTC 204592).\u003c\/li\u003e\n\u003cli\u003eWill not work with models with a height sensor attached to the UCA.\u003c\/li\u003e\n\u003cli\u003eDoes not fit Bronco Sport models.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Raptor Models.\u003c\/li\u003e\n\u003cli\u003eIs compatible with HOSS 3.0 Bronco Models\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 Performance Elite series coil-overs offer improved damper performance over stock\u003c\/li\u003e\n\u003cli\u003ePerformance UCAs increase strength and allow for more suspension travel\u003c\/li\u003e\n\u003cli\u003eRear trailing arms built from 1.9 inch OD heavy wall tubing\u003c\/li\u003e\n\u003cli\u003eFactory style rubber bushings for long life with low maintenance\u003c\/li\u003e\n\u003cli\u003eAdjustable rear track bar for proper rear axle alignment\u003c\/li\u003e\n\u003cli\u003eSteering tie rod sleeves increase the diameter of the factory tie rods\u003c\/li\u003e\n\u003cli\u003eThick steel skid plates to protect shocks from damage\u003c\/li\u003e\n\u003cli\u003eMax Tire clearance kit allow room for 37 inchРЎСљ Tires without rubbing\u003c\/li\u003e\n\u003cli\u003eDurable textured black powdercoat finish\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to install right out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eIncludes one BDS343009, 2021-2023 Ford Bronco, Rear Track Bar, UPC Code 711745613744\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS743000, 2021-2023 Ford Bronco, Suspension Skid Front\/Rear Box Kit, UPC Code 711745613768\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS743001, 2021-2023 Ford Bronco, Front UCA, Body Mount, Tie Rod Sleeve Box Kit, UPC Code 711745613751\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS743009, 2021-2023 Ford Bronco, Rear Control Arms - Rubber Bushings, UPC Code 711745613737\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406447, Kit: PVD, KOH Edition: 21-OnN Ford Bronco, 4 Door, w\/UCA, Front Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, Base 4 inch Lift, Sasquatch 3 inch Lift, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003cli\u003eIncludes one FOX88406448, Kit: PVD, KOH Edition: 21-ON Ford Bronco, 4 Door, Rear Coilover, 2.5 Truck Fox Performance Elite Series, R\/R, Base 3 inch Lift, Sasquatch 2 inch, Dual Speed Compression Adjust\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":44513858748482,"sku":"BDS2500FPE","price":7468.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/BDS2500FPE-BLDV.jpg?v=1784952472"},{"product_id":"rock-krawler-3-inch-pro-x-system-6th-gen-ford-bronco","title":"Rock Krawler 3 Inch Pro X System - 6th Gen Ford Bronco","description":"\u003cp\u003eThe Rock Krawler 3 Inch Pro X System is more than a lift kit for the 6th gen Bronco. It swaps the weak factory components for stronger ones, adds a triangulated 4 link rear that does away with the rear track bar, and puts RRD 2.625 inch remote reservoir coilovers on all four corners. The lift is adjustable from 2 to 3 inches, which suits 35 to 37 inch tires with the factory fenders.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(2) front 2.625 inch remote reservoir coilover assemblies\u003c\/li\u003e\n\u003cli\u003e(2) rear 2.625 inch remote reservoir coilover assemblies\u003c\/li\u003e\n\u003cli\u003e(2) fabricated front upper A arms\u003c\/li\u003e\n\u003cli\u003e(4) adjustable solid alloy steel rear control arms\u003c\/li\u003e\n\u003cli\u003e(1) weld-on rear axle truss\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy this system\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriangulated 4 link rear.\u003c\/strong\u003e It allows amazing articulation without bind and lets you remove the rear track bar. The rear instant center and roll center are both improved for highway ride and handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRRD 2.625 inch remote reservoir coilovers\u003c\/strong\u003e for adjustable lift heights, with a 30 percent or better gain in suspension travel and damping capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple spring rates on a single spring.\u003c\/strong\u003e Rock Krawler says it is the first to do this for 6th gen Broncos, to help ride, handling and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHard anodized aluminum shock bodies\u003c\/strong\u003e that cool better than steel and will not rust or corrode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabricated upper A arms\u003c\/strong\u003e that correct caster and camber and account for the extra travel, with free rotating, service-free Adventure Series joints at the frame and a rebuildable quiet control joint at the upright.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable black powder coat\u003c\/strong\u003e on the solid alloy steel rear control arms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty coverage,\u003c\/strong\u003e per Rock Krawler.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePick your package\u003c\/h3\u003e\u003cp\u003eBoth stages use the same arms, coilovers and axle truss. The Package option decides whether the coilovers have Fast CD adjusters.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 1:\u003c\/strong\u003e RRD 2.625 inch remote reservoir coilovers at all four corners, with the arms and hardware listed above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 2:\u003c\/strong\u003e Everything in Stage 1, with Fast CD adjusters on the coilovers. The adjusters let you dial in on-road and off-road damping to your own taste.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and what else you'll need\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWorks on all 6th gen Broncos except the Raptor.\u003c\/li\u003e\n\u003cli\u003eRequires removing brackets off the rear axle.\u003c\/li\u003e\n\u003cli\u003eRequires welding the rear axle truss on.\u003c\/li\u003e\n\u003cli\u003eRock Krawler highly recommends a rear sway bar, and says to add one if your Bronco did not come with it.\u003c\/li\u003e\n\u003cli\u003eTire fitment is 35 to 37 inch tires on the OEM fender flares, and Rock Krawler typically recommends 4.5 inches of backspacing on wheels for 35 and 37 inch tires.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAll RRD shocks and coilovers are designed and built in-house. Rock Krawler lists a 3 to 4 week lead time on 2.625 inch RRD shocks and coilovers, counted in business days from the order date.\u003c\/p\u003e\u003cp\u003eRock Krawler lists lifetime warranty coverage on this system. Its warranty page covers hard parts such as control arms and brackets for life, with shocks, joints and other wear items on shorter terms. See the warranty page for the full terms.\u003c\/p\u003e","brand":"Rock Krawler","offers":[{"title":"Stage 1","offer_id":45517471318082,"sku":"FB30PX-S1","price":6699.99,"currency_code":"USD","in_stock":true},{"title":"Stage 2","offer_id":45517471350850,"sku":"FB30PX-S2","price":7834.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/FB30PX-S1_-_Kit_3_Bronco_Pro-X_Pro_System_-_Stage_1__58147.1753725037.webp?v=1791653870"},{"product_id":"rock-krawler-3-inch-x-factor-system-6th-gen-ford-bronco","title":"Rock Krawler 3 Inch X Factor System - 6th Gen Ford Bronco","description":"\u003cp\u003eRock Krawler's 3 Inch X Factor System is, in Rock Krawler's words, an amazing starting point. It is a complete bolt-in kit that you can reverse. You get RRD 2.625 inch remote reservoir coilovers on all four corners with adjustable lift from 2 to 3 inches, fabricated front upper A arms, adjustable rear control arms and a rear track bar with a raised bracket. It is built for 35 to 37 inch tires on factory fender flares, and for owners who plan to add more Rock Krawler parts later.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(2) front 2.625 inch remote reservoir coilover assemblies\u003c\/li\u003e\n\u003cli\u003e(2) rear 2.625 inch remote reservoir coilover assemblies\u003c\/li\u003e\n\u003cli\u003e(2) fabricated front upper A arms\u003c\/li\u003e\n\u003cli\u003e(4) adjustable solid alloy steel rear control arms\u003c\/li\u003e\n\u003cli\u003e(1) adjustable rear track bar made from solid alloy steel\u003c\/li\u003e\n\u003cli\u003e(1) rear track bar bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy this system\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete bolt-in and reversible.\u003c\/strong\u003e Rock Krawler also says it is easy to build on with other parts as your goals grow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRRD 2.625 inch remote reservoir coilovers\u003c\/strong\u003e with adjustable lift heights and a 30 percent or better gain in travel and damping capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple spring rates on one spring,\u003c\/strong\u003e which Rock Krawler says helps ride, handling and trail performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaised rear track bar bracket\u003c\/strong\u003e recenters the rear axle and raises the roll center for better handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabricated upper A arms\u003c\/strong\u003e that correct caster and camber, with free rotating, service-free Adventure Series joints at the frame and a rebuildable quiet control joint at the upright.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHard anodized aluminum bodies\u003c\/strong\u003e that cool better than steel and will never rust or corrode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty coverage,\u003c\/strong\u003e per Rock Krawler.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePick your package\u003c\/h3\u003e\u003cp\u003eThe arms, coilovers and track bar are the same in both stages. Package is about the adjusters.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 1:\u003c\/strong\u003e RRD 2.625 inch remote reservoir coilovers at all four corners, with the arms and hardware listed above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 2:\u003c\/strong\u003e Everything in Stage 1, with Fast CD adjusters on the coilovers. The adjusters let you dial in on-road and off-road damping to your own taste.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and what else you'll need\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWorks on all 6th gen Broncos except the Raptor.\u003c\/li\u003e\n\u003cli\u003eLift is adjustable from 2 to 3 inches, for 35 to 37 inch tires on the OEM fender flares.\u003c\/li\u003e\n\u003cli\u003eRock Krawler typically recommends 4.5 inches of backspacing on wheels used with 35 and 37 inch tires.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAll RRD shocks and coilovers are designed and built in-house. Rock Krawler lists a 3 to 4 week lead time on 2.625 inch RRD shocks and coilovers, counted in business days from the order date.\u003c\/p\u003e\u003cp\u003eRock Krawler lists lifetime warranty coverage on this system. Its warranty page covers hard parts such as control arms and brackets for life, with shocks, joints and other wear items on shorter terms. See the warranty page for the full terms.\u003c\/p\u003e","brand":"Rock Krawler","offers":[{"title":"Stage 1","offer_id":45517471416386,"sku":"FB30XF-S1","price":6744.99,"currency_code":"USD","in_stock":true},{"title":"Stage 2","offer_id":45517471449154,"sku":"FB30XF-S2","price":7879.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/FB30XF-S1_-_Kit_3_Bronco_X_Factor_System_-_Stage_1__13490.1753718105.webp?v=1791653872"},{"product_id":"rock-krawler-1-0-inch-adventure-leveling-kit-ford-bronco","title":"Rock Krawler 1.0 Inch Adventure Leveling Kit - Ford Bronco","description":"\u003cp\u003eA simple 1 inch front lift for the Ford Bronco. The kit is a set of four billet aluminum strut spacers that bolt to the bottom of the strut and give the front a level stance.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(4) 1 inch billet aluminum strut spacers, machined from aircraft grade 6061 aluminum\u003c\/li\u003e\n\u003cli\u003e(1) hardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy this kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 inch of front lift\u003c\/strong\u003e for a level stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet 6061 aluminum\u003c\/strong\u003e spacers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade 8 hardware\u003c\/strong\u003e mounts the spacers to the bottom of the strut, which keeps the install easy.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and what else you'll need\u003c\/h3\u003e\u003cp\u003eRock Krawler recommends 35x12.5R17 tires and 3.5 to 5.0 inches of wheel backspacing with this kit. The product page lists it for the Ford Bronco and does not give model years.\u003c\/p\u003e","brand":"Rock Krawler","offers":[{"title":"Default Title","offer_id":45517471580226,"sku":"FB10AS","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/RK08029__64347.1753725374.webp?v=1791653876"},{"product_id":"readylift-1-25-inch-front-leveling-kit-2021-2026-ford-bronco-66-21100","title":"ReadyLIFT 1.25 Inch Front Leveling Kit - 2021-2026 Ford Bronco (66-21100)","description":"\u003cp\u003eThis ReadyLIFT kit adds 1.25 inches of front lift to the 2021-2026 Ford Bronco. It uses two CNC-machined billet aluminum top-mount strut extensions and two lower strut extensions, set up to reach full height without causing ball joint or tie rod bind through the suspension travel. ReadyLIFT says it works with or without the factory Sasquatch package. Shocks are not included.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAircraft-grade CNC-machined billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no cutting or modifications\u003c\/li\u003e\n\u003cli\u003eDesigned to avoid ball joint or tie rod bind while the suspension cycles\u003c\/li\u003e\n\u003cli\u003eIncreases ground clearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 front strut top spacers\u003c\/li\u003e\n\u003cli\u003e2 front strut bottom spacers\u003c\/li\u003e\n\u003cli\u003eHardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 2021-2026 Ford Bronco\u003c\/li\u003e\n\u003cli\u003eWorks with or without the factory Sasquatch package\u003c\/li\u003e\n\u003cli\u003eNot tested on the Bronco Big Bend with the stock 2 inch suspension lift; other parts may be required\u003c\/li\u003e\n\u003cli\u003eTire guidance is based on Wheel Pros wheels and Nitto tires; test fit any tire and wheel combination before installing, and note the maximum size varies by trim and package\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLIFT\u003c\/li\u003e\n\u003cli\u003ePart number: 66-21100\u003c\/li\u003e\n\u003cli\u003eFront lift: 1.25 inch\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined billet aluminum\u003c\/li\u003e\n\u003cli\u003eShocks included: No\u003c\/li\u003e\n\u003cli\u003eSold as: Kit\u003c\/li\u003e\n\u003cli\u003eEstimated install time: 2.5 hours, plus or minus 0.5 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eAllow about 2.5 hours, plus or minus 0.5, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. Plan on an alignment (may cost extra), re-aim the headlamps afterward, and note that driver-assist systems may need checking or recalibration, possibly with dealer tools. ReadyLIFT is not responsible for damage from improper installation.\u003c\/p\u003e\u003cp\u003eModifying your suspension can change handling and rollover risk (SAE J2492). Larger aftermarket tires, often 10-ply E-rated, can ride harsher. California Prop 65 notice: the manufacturer lists DEHP.\u003c\/p\u003e","brand":"ReadyLIFT","offers":[{"title":"Default Title","offer_id":45534502125634,"sku":"66-21100","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/rls-66-21100_xl.jpg?v=1791767890"},{"product_id":"readylift-2-inch-sst-lift-kit-2021-2026-ford-bronco-69-21200","title":"ReadyLIFT 2 Inch SST Lift Kit - 2021-2026 Ford Bronco (69-21200)","description":"\u003cp\u003eThis ReadyLIFT SST kit gives the 2021-2026 Ford Bronco a 2 inch lift using CNC-machined billet aluminum top-mount spacers at the front and rear. It is a direct bolt-on install with no modifications required, and the spacers are designed to avoid ball joint or tie rod bind. It is for non-Sasquatch Broncos and does not include shocks or control arms.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aircraft-grade 6061 T6 billet aluminum top-mount spacers, front and rear\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation, no modifications required\u003c\/li\u003e\n\u003cli\u003eHigh-grade hardware included\u003c\/li\u003e\n\u003cli\u003eDesigned to avoid ball joint or tie rod bind\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 front strut spacers\u003c\/li\u003e\n\u003cli\u003e2 rear strut spacers\u003c\/li\u003e\n\u003cli\u003eHardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 2021-2026 Ford Bronco without the Sasquatch package\u003c\/li\u003e\n\u003cli\u003eNot for Sasquatch Package vehicles, including Badlands, Wildtrak, First Edition and Wildtrack models with Hoss 3.0 Fox shocks\u003c\/li\u003e\n\u003cli\u003eNot tested on the Bronco Big Bend with a stock 2 inch suspension lift; other requirements may apply\u003c\/li\u003e\n\u003cli\u003eRecommended tire and wheel: 305\/70R17 on a 17x8.5 wheel with +18 offset. Max with trimming: 35x12.50 on a 9 inch wide wheel with 0 offset\u003c\/li\u003e\n\u003cli\u003eTest fit every tire and wheel combination before installing. Recommendations are based on Wheel Pros wheels and Nitto tires\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLIFT\u003c\/li\u003e\n\u003cli\u003ePart number: 69-21200\u003c\/li\u003e\n\u003cli\u003eLift: 2 inch\u003c\/li\u003e\n\u003cli\u003eMax tire: 35x12.50 with trimming, 9 inch wide wheel, 0 offset\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aircraft-grade 6061 T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eEstimated install time: 4.5 hours, plus or minus 0.5 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eAllow about 4.5 hours, plus or minus 0.5, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. Alignment may be required, headlamps must be checked and adjusted, and driver-assist systems may need adjustment with dealer tools. Larger E-rated tires can ride harsher than C-rated factory tires.\u003c\/p\u003e\u003cp\u003eModifying your suspension can change handling, and loss of control or rollover is possible in sharp turns or abrupt maneuvers (SAE J2492). California Proposition 65: this product can expose you to DEHP.\u003c\/p\u003e","brand":"ReadyLIFT","offers":[{"title":"Default Title","offer_id":45534652989506,"sku":"69-21200","price":261.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/rls-69-21200_xl.jpg?v=1791768100"},{"product_id":"readylift-2-inch-front-2-5-inch-rear-sst-lift-kit-2021-2026-ford-bronco-69-21210","title":"ReadyLIFT 2 Inch Front 2.5 Inch Rear SST Lift Kit - 2021-2026 Ford Bronco (69-21210)","description":"\u003cp\u003eReadyLIFT 2 Inch Front 2.5 Inch Rear SST Lift Kit for 2021-2026 Ford Bronco.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMild lift for larger wheel and tire combos\u003c\/li\u003e\n\u003cli\u003eKeeps the OEM ride and drivability\u003c\/li\u003e\n\u003cli\u003eNo cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSpacer lift hardware\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitment notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 2021-2026 Bronco.\u003c\/li\u003e\n\u003cli\u003eNot for Sasquatch package models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLIFT\u003c\/li\u003e\n\u003cli\u003ePart number: 69-21210\u003c\/li\u003e\n\u003cli\u003eFront lift: 2 inch\u003c\/li\u003e\n\u003cli\u003eRear lift: 2.5 inch\u003c\/li\u003e\n\u003cli\u003eMax tire height: 35 inch\u003c\/li\u003e\n\u003cli\u003eMax tire width: 12.5 inch\u003c\/li\u003e\n\u003cli\u003eSuggested wheel width: 9 inch\u003c\/li\u003e\n\u003cli\u003eFront and rear components: Spacers\u003c\/li\u003e\n\u003cli\u003eBrake lines included: No\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ReadyLIFT","offers":[{"title":"Default Title","offer_id":45534653022274,"sku":"69-21210","price":290.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/rls-69-21210_xl.jpg?v=1791768103"},{"product_id":"readylift-3-inch-sst-lift-kit-2021-2026-ford-bronco-69-21300","title":"ReadyLIFT 3 Inch SST Lift Kit - 2021-2024 Ford Bronco Sasquatch Package (69-21300)","description":"\u003cp\u003eThis ReadyLIFT SST kit gives the 2021-2024 Ford Bronco with the Sasquatch Package a 3 inch lift, with a slight front-to-rear rake to make room for a larger spare tire and accessories. It clears up to 37x12.50 tires on a 17x8.5 wheel with +18mm offset. Front spacers are CNC-machined billet aluminum, the upper control arms are tubular, and the whole kit is 100% bolt-on with no cutting. Shocks are not included.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aircraft-grade 6061-T6 billet aluminum front spacers\u003c\/li\u003e\n\u003cli\u003eCNC-turned 4130 chromoly front preload spacers\u003c\/li\u003e\n\u003cli\u003eTubular upper control arms with corrected ball joint angle and position to address caster and camber changes, using factory ball joints\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel offset rear spacers, powder coated, and a 0.250 inch steel heavy-duty rear track bar bracket\u003c\/li\u003e\n\u003cli\u003e100% bolt-on installation, no modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 front strut spacers\u003c\/li\u003e\n\u003cli\u003e2 front preload spacers\u003c\/li\u003e\n\u003cli\u003e1 left upper control arm\u003c\/li\u003e\n\u003cli\u003e1 right upper control arm\u003c\/li\u003e\n\u003cli\u003e2 rear strut spacers\u003c\/li\u003e\n\u003cli\u003e1 rear track bar bracket\u003c\/li\u003e\n\u003cli\u003eRear brake line bracket\u003c\/li\u003e\n\u003cli\u003eHardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 2021-2024 Ford Bronco equipped with the Sasquatch Package, which ReadyLIFT lists as including Badlands, Wildtrak and First Edition trims\u003c\/li\u003e\n\u003cli\u003eNot for Bronco Sport\u003c\/li\u003e\n\u003cli\u003eNot compatible with vehicles equipped with Hoss 3.0 Fox shocks\u003c\/li\u003e\n\u003cli\u003eBroncos without the Sasquatch Package need a different kit; the ReadyLIFT page points to 69-21400\u003c\/li\u003e\n\u003cli\u003eNot tested on Bronco Big Bend with the stock 2 inch suspension lift, and ReadyLIFT notes other requirements may be needed\u003c\/li\u003e\n\u003cli\u003eAt 37x12.50 the tire will still contact the front body mount and possibly the rear inner fender at full travel and steering lock. Those areas have to be addressed if you use full travel; ReadyLIFT lists up to 38x12.50 with trimming\u003c\/li\u003e\n\u003cli\u003eTire and wheel recommendations are based on Wheel Pros wheels and Nitto tires; test fit any combination before installing. Larger E-rated tires (10-ply or more) can make the ride feel harsher than OEM C-rated tires\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLIFT\u003c\/li\u003e\n\u003cli\u003ePart number: 69-21300\u003c\/li\u003e\n\u003cli\u003eLift: 3 inch\u003c\/li\u003e\n\u003cli\u003eMax tire: 37x12.50 on a 17x8.5 wheel, +18mm offset\u003c\/li\u003e\n\u003cli\u003eShocks included: No\u003c\/li\u003e\n\u003cli\u003eBrake lines included: No\u003c\/li\u003e\n\u003cli\u003eEstimated install time: 5.5 hours, plus or minus 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eAllow about 5.5 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. An alignment may be required afterward (possibly at extra cost), headlamps must be checked and adjusted, and ADAS cameras and radar may need adjustment, with some vehicles needing OEM dealer tools and trained technicians.\u003c\/p\u003e\u003cp\u003eModifying your suspension can change handling and rollover risk (SAE J2492). ReadyLIFT is not responsible for damage or failure from improper installation. This product can expose you to DEHP, covered under California Proposition 65 (cancer and reproductive harm).\u003c\/p\u003e","brand":"ReadyLIFT","offers":[{"title":"Default Title","offer_id":45534653055042,"sku":"69-21300","price":407.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/rls-69-21300_ve_xl.jpg?v=1791768106"},{"product_id":"readylift-3-inch-front-sst-lift-kit-2021-2026-ford-bronco-sasquatch-69-21310","title":"ReadyLIFT 3 Inch Front SST Lift Kit - 2021-2026 Ford Bronco Sasquatch (69-21310)","description":"\u003cp\u003eThis ReadyLIFT SST kit gives the 2021-2026 Ford Bronco with the Sasquatch package a 3 inch front lift, with a slight front-to-rear rake. The tubular upper control arms come with heavy-duty high-angle ball joints already installed, and the front spacers are 6061-T6 billet aluminum. It is a bolt-on install with no cutting or modifications, and ReadyLIFT lists up to a 37x12.50 tire.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTubular upper control arms with corrected ball joint angle and position for caster and camber, and pre-installed heavy-duty high-angle ball joints\u003c\/li\u003e\n\u003cli\u003e6061-T6 billet aluminum front spacers sized to avoid ball joint or tie rod bind\u003c\/li\u003e\n\u003cli\u003e4130 alloy steel front preload spacers\u003c\/li\u003e\n\u003cli\u003eSteel offset rear spacers and a heavy-duty 0.250 inch steel rear track bar bracket\u003c\/li\u003e\n\u003cli\u003eSealed dust cap with ReadyLIFT logo on the upper control arms\u003c\/li\u003e\n\u003cli\u003eNo cutting or modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 front strut spacers\u003c\/li\u003e\n\u003cli\u003e2 front preload spacers\u003c\/li\u003e\n\u003cli\u003e1 left upper control arm\u003c\/li\u003e\n\u003cli\u003e1 right upper control arm\u003c\/li\u003e\n\u003cli\u003e2 rear strut spacers\u003c\/li\u003e\n\u003cli\u003e1 rear track bar bracket\u003c\/li\u003e\n\u003cli\u003e1 rear brake line bracket\u003c\/li\u003e\n\u003cli\u003e1 hardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 2021-2026 Ford Bronco with the Sasquatch package, including Badlands, Wildtrak and First Edition models\u003c\/li\u003e\n\u003cli\u003eNot for Bronco Sport or vehicles with Hoss 3.0 Fox shocks\u003c\/li\u003e\n\u003cli\u003eNot tested on the Bronco Big Bend with a stock 2 inch suspension lift; other requirements may apply\u003c\/li\u003e\n\u003cli\u003eMax tire: 37x12.50 on a 17x8.5 wheel with +18mm offset; 38x12.50 with trimming\u003c\/li\u003e\n\u003cli\u003eAt 37x12.50 the tire will contact the front body mount and possibly the rear inner fender at full travel and lock-to-lock; these areas must be addressed\u003c\/li\u003e\n\u003cli\u003eTest fit every tire and wheel combination before installing. Recommendations are based on Wheel Pros wheels and Nitto tires\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLIFT\u003c\/li\u003e\n\u003cli\u003ePart number: 69-21310\u003c\/li\u003e\n\u003cli\u003eFront lift: 3 inch\u003c\/li\u003e\n\u003cli\u003eMax tire: 37x12.50 on 17x8.5 wheel, +18mm offset\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061-T6 billet aluminum front spacers, 4130 alloy steel preload spacers, steel rear spacers and track bar bracket\u003c\/li\u003e\n\u003cli\u003eEstimated install time: 5.5 hours, plus or minus 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eAllow about 5.5 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. Alignment may be required, headlamps must be checked and adjusted, and driver-assist systems may need adjustment with dealer tools. Larger E-rated tires can ride harsher than C-rated factory tires.\u003c\/p\u003e\u003cp\u003eModifying your suspension can change handling, and loss of control or rollover is possible in sharp turns or abrupt maneuvers (SAE J2492). California Proposition 65: this product can expose you to DEHP.\u003c\/p\u003e","brand":"ReadyLIFT","offers":[{"title":"Default Title","offer_id":45534653120578,"sku":"69-21310","price":1017.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/rls-69-21310_co_xl.jpg?v=1791768108"},{"product_id":"readylift-4-inch-front-sst-lift-kit-2021-2026-ford-bronco-69-21410","title":"ReadyLIFT 4 Inch Front SST Lift Kit - 2021-2026 Ford Bronco (69-21410)","description":"\u003cp\u003eThis ReadyLIFT SST kit gives the 2021-2026 Ford Bronco (non-Sasquatch base models) a 4 inch front lift with a slight front-to-rear rake. The tubular upper control arms come with heavy-duty high-angle ball joints already installed, and the front spacers are 6061-T6 billet aluminum. It is a bolt-on install with no cutting or modifications, and ReadyLIFT lists up to a 37x12.50 tire.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTubular upper control arms with corrected ball joint angle and position for caster and camber, and pre-installed heavy-duty high-angle ball joints\u003c\/li\u003e\n\u003cli\u003e6061-T6 billet aluminum front spacers and CNC-turned 4130 chromoly front preload spacers\u003c\/li\u003e\n\u003cli\u003eOffset high-strength steel rear spacers and heavy-duty 0.250 inch steel rear track bar bracket\u003c\/li\u003e\n\u003cli\u003eSealed dust cap with ReadyLIFT logo on the upper control arms\u003c\/li\u003e\n\u003cli\u003e100% bolt-on, no cutting or modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 front strut spacers\u003c\/li\u003e\n\u003cli\u003e2 front preload spacers\u003c\/li\u003e\n\u003cli\u003e1 left upper control arm with ball joint\u003c\/li\u003e\n\u003cli\u003e1 right upper control arm with ball joint\u003c\/li\u003e\n\u003cli\u003e2 rear strut spacers\u003c\/li\u003e\n\u003cli\u003e1 rear track bar bracket\u003c\/li\u003e\n\u003cli\u003eRear brake line bracket\u003c\/li\u003e\n\u003cli\u003eHardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits 2021-2026 Ford Bronco base models\u003c\/li\u003e\n\u003cli\u003eNot for Sasquatch Package vehicles, Badlands or Wildtrack models with Hoss 3.0 Fox shocks, or the Bronco Sport (the Sasquatch kit is 69-21310)\u003c\/li\u003e\n\u003cli\u003eNot tested on the Bronco Big Bend with a stock 2 inch suspension lift; other requirements may apply\u003c\/li\u003e\n\u003cli\u003eMax tire: 37x12.50 on a 17x8.5 wheel with +18mm offset; 38x12.50 with trimming\u003c\/li\u003e\n\u003cli\u003eAt 37x12.50 the tire will contact the front body mount and possibly the rear inner fender at full travel and lock-to-lock; these areas must be addressed\u003c\/li\u003e\n\u003cli\u003eTest fit every tire and wheel combination before installing. Recommendations are based on Wheel Pros wheels and Nitto tires\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLIFT\u003c\/li\u003e\n\u003cli\u003ePart number: 69-21410\u003c\/li\u003e\n\u003cli\u003eFront lift: 4 inch\u003c\/li\u003e\n\u003cli\u003eMax tire: 37x12.50 on 17x8.5 wheel, +18mm offset\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061-T6 billet aluminum front spacers, 4130 alloy steel preload spacers, steel rear spacers and track bar bracket\u003c\/li\u003e\n\u003cli\u003eEstimated install time: 5.5 hours, plus or minus 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eAllow about 5.5 hours, plus or minus 1, not counting alignment or wheel and tire assembly. ReadyLIFT recommends a certified mechanic. Alignment may be required, headlamps must be checked and adjusted, and driver-assist systems may need adjustment with dealer tools. Larger E-rated tires can ride harsher than C-rated factory tires.\u003c\/p\u003e\u003cp\u003eModifying your suspension can change handling, and loss of control or rollover is possible in sharp turns or abrupt maneuvers (SAE J2492). California Proposition 65: this product can expose you to DEHP.\u003c\/p\u003e","brand":"ReadyLIFT","offers":[{"title":"Default Title","offer_id":45534653153346,"sku":"69-21410","price":1017.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/rls-69-21410_iv_xl.jpg?v=1791768111"},{"product_id":"bilstein-b8-6112-leveling-kit-2021-ford-bronco-47-314009","title":"Bilstein B8 6112 Leveling Kit 2021+ Ford Bronco 47-314009","description":"\u003cp\u003e\u003cstrong\u003eBilstein B8 6112 Leveling Kit 2021+ Ford Bronco 47-314009\u003c\/strong\u003e – Bilstein part number \u003cstrong\u003e47-314009\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein B8 6112 rear leveling kit is made for the 2021+ Ford Bronco. Specs: 17.11 in collapsed, 25.56 in extended.\u003c\/p\u003e\n\u003cp\u003eBilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eTravel: 8.45 in\u003c\/li\u003e\n\u003cli\u003eExtended length: 25.56 in\u003c\/li\u003e\n\u003cli\u003eCollapsed length: 17.11 in\u003c\/li\u003e\n\u003cli\u003eBody diameter: 2.65 in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 60mm\u003c\/li\u003e\n\u003cli\u003eShaft diameter: 18mm\u003c\/li\u003e\n\u003cli\u003eReservoir: No\u003c\/li\u003e\n\u003cli\u003eDamping: Non-Adjustable\u003c\/li\u003e\n\u003cli\u003eInternal design: Monotube\u003c\/li\u003e\n\u003cli\u003eFinish: Dampers: Zinc Plated\/Springs: Black\u003c\/li\u003e\n\u003cli\u003eRear Main Spring Rate (lbs\/in): 288\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFord Bronco 2021-2026\u003c\/li\u003e\n\u003cli\u003eNote: Provides 1.2-2.3\" Rear Lift Without Sasquatch Package;0.3-1.4\" Rear Lift With Sasquatch Package\u003c\/li\u003e\n\u003cli\u003eNote: Provides 1.8-2.8\" Rear Lift Without Sasquatch Package;0.3-1.4\" Rear Lift With Sasquatch Package\u003c\/li\u003e\n\u003cli\u003eNote: Provides 0.3-1.4\" Rear L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways confirm fitment for your exact year, drivetrain and lift height before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBilstein part number: 47-314009\u003c\/li\u003e\n\u003cli\u003eShipping weight: 54 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/bilstein.apacatalog.com\/Media\/E4-WM5-Y723A00_4.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45825884225602,"sku":"47-314009","price":904.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/apa_47-314009_1_20260924105015.jpg?v=1793071696"},{"product_id":"bilstein-b8-6112-leveling-kit-2021-ford-bronco-47-325593","title":"Bilstein B8 6112 Leveling Kit 2021+ Ford Bronco 47-325593","description":"\u003cp\u003e\u003cstrong\u003eBilstein B8 6112 Leveling Kit 2021+ Ford Bronco 47-325593\u003c\/strong\u003e – Bilstein part number \u003cstrong\u003e47-325593\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein B8 6112 rear leveling kit is made for the 2021+ Ford Bronco. Specs: 17.11 in collapsed, 25.56 in extended.\u003c\/p\u003e\n\u003cp\u003eBilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eTravel: 8.45 in\u003c\/li\u003e\n\u003cli\u003eExtended length: 25.56 in\u003c\/li\u003e\n\u003cli\u003eCollapsed length: 17.11 in\u003c\/li\u003e\n\u003cli\u003eBody diameter: 2.65 in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 60mm\u003c\/li\u003e\n\u003cli\u003eShaft diameter: 18mm\u003c\/li\u003e\n\u003cli\u003eReservoir: No\u003c\/li\u003e\n\u003cli\u003eDamping: Non-Adjustable\u003c\/li\u003e\n\u003cli\u003eInternal design: Monotube\u003c\/li\u003e\n\u003cli\u003eFinish: Dampers: Zinc Plated\/Springs: Black\u003c\/li\u003e\n\u003cli\u003eRear Main Spring Rate (lbs\/in): 288\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFord Bronco 2021-2026\u003c\/li\u003e\n\u003cli\u003eNote: Provides 1.2-2.3\" Rear Lift Without Sasquatch Package;0.3-1.4\" Rear Lift With Sasquatch Package\u003c\/li\u003e\n\u003cli\u003eNote: Provides 2.0-2.8\" Rear Lift Without Sasquatch Package;0.3-1.4\" Rear Lift With Sasquatch Package\u003c\/li\u003e\n\u003cli\u003eNote: Provides 0.3-1.4\" Rear L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways confirm fitment for your exact year, drivetrain and lift height before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBilstein part number: 47-325593\u003c\/li\u003e\n\u003cli\u003eShipping weight: 58.2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/bilstein.apacatalog.com\/Media\/E4-WM5-Y723A00_4.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45825884684354,"sku":"47-325593","price":866.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/apa_47-325593_1_20260924103919.jpg?v=1793071697"},{"product_id":"bilstein-b8-6112-leveling-kit-2021-ford-bronco-47-325586","title":"Bilstein B8 6112 Leveling Kit 2021+ Ford Bronco 47-325586","description":"\u003cp\u003e\u003cstrong\u003eBilstein B8 6112 Leveling Kit 2021+ Ford Bronco 47-325586\u003c\/strong\u003e – Bilstein part number \u003cstrong\u003e47-325586\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein B8 6112 front leveling kit is made for the 2021+ Ford Bronco. Specs: 16.62 in collapsed, 22.80 in extended.\u003c\/p\u003e\n\u003cp\u003eBilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eTravel: 6.18 in\u003c\/li\u003e\n\u003cli\u003eExtended length: 22.80 in\u003c\/li\u003e\n\u003cli\u003eCollapsed length: 16.62 in\u003c\/li\u003e\n\u003cli\u003eBody diameter: 2.65 in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 60mm\u003c\/li\u003e\n\u003cli\u003eShaft diameter: 18mm\u003c\/li\u003e\n\u003cli\u003eReservoir: No\u003c\/li\u003e\n\u003cli\u003eDamping: Non-Adjustable\u003c\/li\u003e\n\u003cli\u003eInternal design: Monotube\u003c\/li\u003e\n\u003cli\u003eFinish: Dampers: Zinc Plated\/Springs: Black\u003c\/li\u003e\n\u003cli\u003eFront Main Spring Rate (lbs\/in): 374\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFord Bronco 2021-2026\u003c\/li\u003e\n\u003cli\u003eNote: Provides 2.0-3.4\" Front Lift Without Sasquatch Package;0.6-2.1\" Front Lift With Sasquatch Package;Aftermarket upper control arms recommended for lift heights greater than 2.5\"\u003c\/li\u003e\n\u003cli\u003eNote: Provides 3.6\" Front Lift Without Sasquatch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways confirm fitment for your exact year, drivetrain and lift height before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBilstein part number: 47-325586\u003c\/li\u003e\n\u003cli\u003eShipping weight: 50.9 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/bilstein.apacatalog.com\/Media\/E4-WM5-Y722A00_4.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45825895759938,"sku":"47-325586","price":866.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/apa_47-325586_1_20260924104413.jpg?v=1793071721"},{"product_id":"bilstein-b8-6112-leveling-kit-2021-ford-bronco-47-313996","title":"Bilstein B8 6112 Leveling Kit 2021+ Ford Bronco 47-313996","description":"\u003cp\u003e\u003cstrong\u003eBilstein B8 6112 Leveling Kit 2021+ Ford Bronco 47-313996\u003c\/strong\u003e – Bilstein part number \u003cstrong\u003e47-313996\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein B8 6112 front leveling kit is made for the 2021+ Ford Bronco. Specs: 16.62 in collapsed, 22.80 in extended.\u003c\/p\u003e\n\u003cp\u003eBilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eTravel: 6.18 in\u003c\/li\u003e\n\u003cli\u003eExtended length: 22.80 in\u003c\/li\u003e\n\u003cli\u003eCollapsed length: 16.62 in\u003c\/li\u003e\n\u003cli\u003eBody diameter: 2.65 in\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 60mm\u003c\/li\u003e\n\u003cli\u003eShaft diameter: 18mm\u003c\/li\u003e\n\u003cli\u003eReservoir: No\u003c\/li\u003e\n\u003cli\u003eDamping: Non-Adjustable\u003c\/li\u003e\n\u003cli\u003eInternal design: Monotube\u003c\/li\u003e\n\u003cli\u003eFinish: Dampers: Zinc Plated\/Springs: Black\u003c\/li\u003e\n\u003cli\u003eFront Main Spring Rate (lbs\/in): 374\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFord Bronco 2021-2026\u003c\/li\u003e\n\u003cli\u003eNote: Provides 1.4-3.0\" Front Lift Without Sasquatch Package;0-1.7\" Front Lift With Sasquatch Package;Aftermarket upper control arms recommended for lift heights greater than 2.5\"\u003c\/li\u003e\n\u003cli\u003eNote: Provides 1.9-3.4\" Front Lift Without Sasquat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways confirm fitment for your exact year, drivetrain and lift height before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBilstein part number: 47-313996\u003c\/li\u003e\n\u003cli\u003eShipping weight: 50.7 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/bilstein.apacatalog.com\/Media\/E4-WM5-Y722A00_4.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":45825910702146,"sku":"47-313996","price":904.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/apa_47-313996_1_20260924104343.jpg?v=1793072540"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/collections\/apa_47-313996_1_20260924104343.jpg?v=1793073969","url":"https:\/\/www.skinnypedalracing.com\/collections\/ford-bronco-2021-lift-kits.oembed","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}