{"title":"Branik Rear Axle Shafts","description":"\u003cp\u003eBranik rear axle kits, cut-to-length rears and Legacy double spline floater shafts.\u003c\/p\u003e","products":[{"product_id":"branik-300m-aam-11-5-rear-axle-kit-with-drive-flanges","title":"Branik 300M AAM 11.5 Rear Axle Kit with Drive Flanges","description":"\u003cp\u003e\u003cstrong\u003eBranik's 300M AAM 11.5 rear axle kits are built for pulling trucks.\u003c\/strong\u003e Every shaft is made from domestically produced 300M material.\u003c\/p\u003e\u003cp\u003eAll have a 40 spline outer with matching drive flanges and the \"Big Cap\" that many sanctioning bodies require.\u003c\/p\u003e\u003ch3\u003eKit includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQty 2: 300M axle shafts\u003c\/li\u003e\n\u003cli\u003eQty 1: drive flange kit with hardware and Big Caps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarrier spline: 30, 38 Yukon or 38 Liberty Gear \/ DHD. Yukon and Liberty Gear \/ DHD 38 splines are different.\u003c\/li\u003e\n\u003cli\u003eHub bolt pattern: Dodge AAM 11.5, 2010 and older GM 11.5, or 2011+ GM 11.5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYour stock axle shaft length is required\u003c\/strong\u003e, measured from the back side of the axle flange to the end of the splines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 38 spline axles are 1.625″ in diameter. Some axle housings may need the spindle bored to fit.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086114574402,"sku":"AAM11.5-REAR-AK","price":1910.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/REAR_AXLE_SHAFT_FULL__13393.1708951242.1280.1280__20493.1708951667_fe949720-d233-494d-a084-14483c9ad181.jpg?v=1795092169"},{"product_id":"branik-300m-dana-80-rear-axle-kit-with-drive-flanges","title":"Branik 300M Dana 80 Rear Axle Kit with Drive Flanges","description":"\u003cp\u003e\u003cstrong\u003eBranik's 300M Dana 80 rear axle kits are built for pulling trucks.\u003c\/strong\u003e Every shaft is made from domestically produced 300M material.\u003c\/p\u003e\u003cp\u003eAll have a 40 spline outer with matching drive flanges and the \"Big Cap\" that many sanctioning bodies require.\u003c\/p\u003e\u003ch3\u003eKit includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQty 2: 300M axle shafts\u003c\/li\u003e\n\u003cli\u003eQty 1: drive flange kit with hardware and Big Caps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarrier spline: 35 or 37\u003c\/li\u003e\n\u003cli\u003eHub bolt pattern: Ford Dana 80 or Dodge Dana 80\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYour stock axle shaft length is required\u003c\/strong\u003e, measured from the back side of the axle flange to the end of the splines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 37 spline axles are 1.590″ in diameter. Some axle housings may need the spindle bored to fit.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086114771010,"sku":"D80-REAR-AK","price":1910.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/REAR_AXLE_SHAFT_FULL__13393.1708951242.1280.1280__20493.1708951667_80c4e17c-6c9c-4ec7-9dac-7f764144b2f2.jpg?v=1795092170"},{"product_id":"branik-chrysler-10-5-11-5-30-spline-4340-rear-axle-shaft-36-1-inch-to-40-1-inch","title":"Branik Chrysler 10.5 \/ 11.5 30 Spline 4340 Rear Axle Shaft, 36.1″ to 40.1″","description":"\u003cul\u003e\n\u003cli\u003eFits Chrysler 10.5″ and 11.5″\u003c\/li\u003e\n\u003cli\u003e30 spline\u003c\/li\u003e\n\u003cli\u003e4340 chromoly\u003c\/li\u003e\n\u003cli\u003eCut-to-length design fits 36.1″ to 40.1″ applications\u003c\/li\u003e\n\u003cli\u003e8 x 3.960″ bolt pattern for 7\/16″ bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCustomer cuts the axle to the specific length.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086119030850,"sku":"AX-AAM11.5-R-30-41","price":354.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/REAR_AXLE_SHAFT__98042.1708951242.1280.1280__18376.1708951551.1280.1280__45778.1711537935.jpg?v=1795091260"},{"product_id":"branik-gm-14-bolt-aam-11-5-30-spline-chromoly-rear-axle-shaft-31-inch-to-35-inch","title":"Branik GM 14 Bolt \/ AAM 11.5 30 Spline Chromoly Rear Axle Shaft, 31″ to 35″","description":"\u003cul\u003e\n\u003cli\u003eFits GM 10.5″ 14 bolt truck and GM 11.5″\u003c\/li\u003e\n\u003cli\u003e4340 chromoly\u003c\/li\u003e\n\u003cli\u003e30 spline\u003c\/li\u003e\n\u003cli\u003eCut-to-length design fits 31″ to 35″ applications\u003c\/li\u003e\n\u003cli\u003e3.562″ axle flange bolt pattern with 1\/2″ bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCustomer cuts the axle to the specific length.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086119456834,"sku":"AX-GM14T-31\/35CTL","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/REAR_AXLE_SHAFT__98042.1708951242.1280.1280__64430.1708951667.jpg?v=1795091262"},{"product_id":"branik-gm-14-bolt-aam-11-5-30-spline-chromoly-rear-axle-shaft-34-8-inch-to-38-8-inch","title":"Branik GM 14 Bolt \/ AAM 11.5 30 Spline Chromoly Rear Axle Shaft, 34.8″ to 38.8″","description":"\u003cul\u003e\n\u003cli\u003eFits GM 10.5″ 14 bolt truck and GM 11.5″\u003c\/li\u003e\n\u003cli\u003e4340 chromoly\u003c\/li\u003e\n\u003cli\u003e30 spline\u003c\/li\u003e\n\u003cli\u003eCut-to-length design fits 34.8″ to 38.8″ applications\u003c\/li\u003e\n\u003cli\u003e3.562″ axle flange bolt pattern with 1\/2″ bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCustomer cuts the axle to the specific length.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086119686210,"sku":"AX-GM14T-34.8\/38.8CTL","price":244.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/REAR_AXLE_SHAFT__98042.1708951242.jpg?v=1795091264"},{"product_id":"branik-gm-14-bolt-aam-11-5-30-spline-chromoly-rear-axle-shaft-38-2-inch-to-42-2-inch","title":"Branik GM 14 Bolt \/ AAM 11.5 30 Spline Chromoly Rear Axle Shaft, 38.2″ to 42.2″","description":"\u003cul\u003e\n\u003cli\u003eFits GM 10.5″ 14 bolt truck and GM 11.5″\u003c\/li\u003e\n\u003cli\u003e4340 chromoly\u003c\/li\u003e\n\u003cli\u003e30 spline\u003c\/li\u003e\n\u003cli\u003eCut-to-length design fits 38.2″ to 42.2″ applications\u003c\/li\u003e\n\u003cli\u003e3.562″ axle flange bolt pattern with 1\/2″ bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCustomer cuts the axle to the specific length.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086119817282,"sku":"AX-GM14T-38.2\/42.2CTL","price":244.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/REAR_AXLE_SHAFT__98042.1708951242.1280.1280__18376.1708951551.jpg?v=1795091266"},{"product_id":"branik-legacy-300m-double-spline-axle-shaft-35-spline-6-inch-to-38-inch","title":"Branik Legacy 300M Double Spline Axle Shaft, 35 Spline, 6″ to 38″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis listing covers 35 spline shafts 6″ to 38″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086120472642,"sku":"LGCY300M35SPL6-38","price":661.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__38045.1715269889.jpg?v=1795091268"},{"product_id":"branik-legacy-300m-double-spline-axle-shaft-35-spline-38-inch-to-44-inch","title":"Branik Legacy 300M Double Spline Axle Shaft, 35 Spline, 38″ to 44″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis listing covers 35 spline shafts 38″ to 44″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086120636482,"sku":"LGCY300M35SPL-38-44","price":734.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__24631.1778295582.jpg?v=1795091269"},{"product_id":"branik-legacy-300m-double-spline-axle-shaft-35-spline-44-inch-to-52-inch","title":"Branik Legacy 300M Double Spline Axle Shaft, 35 Spline, 44″ to 52″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis listing covers 35 spline shafts 44″ to 52″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086121062466,"sku":"LGCY300M35SPL-44-52","price":832.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__24631.1715269981.1280.1280__18267.1719405558.jpg?v=1795091271"},{"product_id":"branik-legacy-300m-double-spline-axle-shaft-35-spline-52-inch-to-60-inch","title":"Branik Legacy 300M Double Spline Axle Shaft, 35 Spline, 52″ to 60″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis listing covers 35 spline shafts 52″ to 60″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086121324610,"sku":"LGCY300M35SPL-52-60","price":955.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__24631.1715269981.1280.1280__18267.1719405558.1280.1280__46206.1719405824.jpg?v=1795091273"},{"product_id":"branik-legacy-300m-double-spline-axle-shaft-40-spline-6-inch-to-38-inch","title":"Branik Legacy 300M Double Spline Axle Shaft, 40 Spline, 6″ to 38″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis listing covers 40 spline shafts 6″ to 38″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086121488450,"sku":"LGCY300M40SPL-6-38","price":782.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__70293.1768720128.jpg?v=1795091275"},{"product_id":"branik-legacy-300m-double-spline-axle-shaft-40-spline-38-inch-to-44-inch","title":"Branik Legacy 300M Double Spline Axle Shaft, 40 Spline, 38″ to 44″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis listing covers 40 spline shafts 38″ to 44″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086121816130,"sku":"LGCY300M40SPL-38-44","price":832.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__41309.1778321137.jpg?v=1795091277"},{"product_id":"branik-legacy-300m-double-spline-axle-shaft-40-spline-44-inch-to-52-inch","title":"Branik Legacy 300M Double Spline Axle Shaft, 40 Spline, 44″ to 52″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis listing covers 40 spline shafts 44″ to 52″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086122143810,"sku":"LGCY300M40SPL-44-52","price":880.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__70293.1715269791.1280.1280__28609.1719408318.jpg?v=1795091279"},{"product_id":"branik-legacy-300m-double-spline-axle-shaft-40-spline-52-inch-to-60-inch","title":"Branik Legacy 300M Double Spline Axle Shaft, 40 Spline, 52″ to 60″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis listing covers 40 spline shafts 52″ to 60″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086123421762,"sku":"LGCY300M40SPL-52-60","price":1151.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__70293.1715269791.1280.1280__28609.1719408318.1280.1280__28428.1719408410.jpg?v=1795091281"},{"product_id":"branik-legacy-4340-double-spline-axle-shaft-35-spline-up-to-44-inch","title":"Branik Legacy 4340 Double Spline Axle Shaft, 35 Spline, up to 44″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNext to Branik's 300M version, these are the strongest double spline shafts they make.\u003c\/p\u003e\u003cp\u003eThis listing covers 35 spline shafts up to 44″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086125158466,"sku":"LGCY434035SPL","price":416.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__44054.1778280587.jpg?v=1795091283"},{"product_id":"branik-legacy-4340-double-spline-axle-shaft-35-spline-over-44-inch","title":"Branik Legacy 4340 Double Spline Axle Shaft, 35 Spline, over 44″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNext to Branik's 300M version, these are the strongest double spline shafts they make.\u003c\/p\u003e\u003cp\u003eThis listing covers 35 spline shafts over 44″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086125682754,"sku":"LGCY434035SPL-L","price":514.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__13265.1717312107.jpg?v=1795091285"},{"product_id":"branik-legacy-4340-double-spline-axle-shaft-40-spline-up-to-44-inch","title":"Branik Legacy 4340 Double Spline Axle Shaft, 40 Spline, up to 44″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNext to Branik's 300M version, these are the strongest double spline shafts they make.\u003c\/p\u003e\u003cp\u003eThis listing covers 40 spline shafts up to 44″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086126305346,"sku":"LGCY434040SPL","price":563.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__21909.1748150383.jpg?v=1795091287"},{"product_id":"branik-legacy-4340-double-spline-axle-shaft-40-spline-over-44-inch","title":"Branik Legacy 4340 Double Spline Axle Shaft, 40 Spline, over 44″","description":"\u003cp\u003eBranik Legacy double spline floater shafts have been tested and proven in competition, with many podium finishes in Ultra4 and WeRock. They are machined 100% in house from top grade material, necked down to the proper diameter for strength, then heat treated and finished.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrice is per axle shaft.\u003c\/li\u003e\n\u003cli\u003ePrice is for a standard double spline shaft. Custom threaded or custom CV style shafts cost more.\u003c\/li\u003e\n\u003cli\u003eThe outer spline is 2.000″ long with a snap ring groove.\u003c\/li\u003e\n\u003cli\u003eReplacing stock flanged axle shafts? You also need a drive flange, and the Branik drive flange setup needs an extra 1.625″ of shaft length.\u003c\/li\u003e\n\u003cli\u003eTypical lead time is about 6 to 8 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNext to Branik's 300M version, these are the strongest double spline shafts they make.\u003c\/p\u003e\u003cp\u003eThis listing covers 40 spline shafts over 44″ long. Enter your exact length below.\u003c\/p\u003e","brand":"Branik Motorsports","offers":[{"title":"Default Title","offer_id":46086126960706,"sku":"LGCY434040SPL-L","price":661.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1476\/5984\/files\/DBL_SPL__72288.1748528815.jpg?v=1795091289"}],"url":"https:\/\/www.skinnypedalracing.com\/collections\/branik-rear-axle-shafts.oembed","provider":"Skinny Pedal Racing","version":"1.0","type":"link"}